1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. WS-7049-Mah
  5. Instruction Manual

La Crosse Technology WS-7049-Mah Instruction Manual

Manual is about: Wireless 433 MHz Weather Station with Forecast

Summary of WS-7049-Mah

  • Page 1

    Ws-7049u wireless 433 mhz weather station with forecast instruction manual.

  • Page 2: Table of Contents

    Table of contents topic page inventory of contents/additional equipment 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode function keys 6 time setting 6 features weather forecast 7-8 indoor temperature and humidity 9 outdoor temperatures 9 minimum & maximum records (in...

  • Page 3: Inventory of Contents

    Inventory of contents 1. The indoor weather station (figure 1). 2. One tx6u remote temperature sensor with mounting bracket (figure 2). 3. Three each, ½” philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. 3 additional equipment (not included) figure 2 m...

  • Page 4: Quick Set-Up Guide

    4 quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first the...

  • Page 5: Detailed Set-Up Guide

    Detailed set-up guide battery installation 5 a. Remote temperature sensor 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 aa batteries. The batteries will fit tightly (to avoid st...

  • Page 6: Program Mode

    Program mode programming note: if 30 seconds are allowed to pass or either the in or the out button is pressed during programming modes, the unit will set the last information entered—the display will stop flashing and return to normal time-date readings a. Function keys there are four function butt...

  • Page 7: Features of The Ws-7049U

    Features of the ws-7049u i. Weather forecast time display weather tendency arrow outdoor temperature indoor humidity indoor temperature forecast icon the weather forecasting feature is estimated to be 75% accurate for the next 12 to 24 hours. The weather forecast is based solely upon the change of a...

  • Page 8: A. Weather

    A. Weather icons there are 3 possible weather icons that will be displayed in the forecast lcd: sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with clouds—indicates that the weather is expected to be fair (not that the weather will be sunny with clo...

  • Page 9: III.  Outdoor Temperature

    9 ii. Indoor temperature and humidity the current indoor relative humidity (viewed below the time) and temperature (viewed below the relative humidity) are displayed in the indoor lcd. Iii. Outdoor temperature the outdoor temperature is viewed in the outdoor lcd. When there is more than one remote t...

  • Page 10

    10 press and hold the “min/max/reset” button for 5 seconds to reset the minimum and maximum recorded temperatures. V. Adding remote sensors (optional) the ws-7049u is able to receive signals from 3 different remote temperature sensors.The remote temperature sensor model(s) that you choose will come ...

  • Page 11

    11 b. Viewing and operating multiple remote sensors to view the temperature of a different remote sensor unit, press and release the “ch” button. An arrow over one of the numbers at the bottom of the lcd will be seen. To view the minimum/maximum temperature: 1. Press and release the “ch” button to s...

  • Page 12: Mounting

    12 mounting note: to achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on a north-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Also, extreme and...

  • Page 13: A.  Using The Table Stand

    13 b. Mounting with adhesive tape 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. 2. Remove the protective strip from one side of the tape. Adhere the tape to the designat...

  • Page 14: Troubleshooting

    14 3. Place the indoor temperature station onto the screw using the hanging hole on the backside. Gently pull the station down to lock the screw into place. Troubleshooting problem: the lcd is faint solution: replace batteries problem: no outdoor temperature is displayed. Solution: 1. Remove all bat...

  • Page 15

    15 maintenance and care instructions • extreme temperatures, vibration and shock should be avoided to prevent damage to the units. • clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents. They may mark the displays and casings. • do not submerge in water. • immedia...

  • Page 16: Specifications

    16 specifications temperature measuring range: indoor 32 °f to 139.8°f with 0.2°f resolution (0 °c to 59.9°c with 0.1 °c resolution) “ofl” displayed if outside this range outdoor -21.8 °f to 157.2°f with 0.2°f resolution (-29.9 °c to 69.9°c resolution) “ofl” displayed if outside this range indoor re...

  • Page 17: Warranty Information

    17 warranty information la crosse technology provides a 1-year warranty on this indoor weather station. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the indoor weather station in for repairs, contact la crosse technology. The indoor ...

  • Page 18

    18 for warranty work, technical support or information contact: la crosse technology 190 main street la crescent, mn 55947 phone: 507.895.7095 fax: 507.895.8000 e-mail support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) website www.Lacrossetech...