1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. WS-7059U
  5. Instruction Manual

La Crosse Technology WS-7059U Instruction Manual

Manual is about: Wireless 433 MHz Temperature Station

Summary of WS-7059U

  • Page 1

    Ws-7059u wireless 433 mhz temperature station instruction manual.

  • Page 2

    2 table of contents topic page inventory of contents/additional equipment 3 about wwvb 3-4 battery installation 4 program mode 5-13 time setting (wwvb & manual) 5-6 time zone setting 7 daylight saving time 8 year setting 8 setting the date 9 selecting °f or °c 9-10 setting the forecast sensitivity 1...

  • Page 3

    Inventory of contents 1. The indoor temperature station (its) 2. Instruction manual and warranty card 3 pressure tendency pressure history figure 1 hanging hole time battery cover indoor table stand lcd screens additional equipment (not included) 1. Three fresh aa 1.5v batteries. About wwvb the nist...

  • Page 4

    Signal from the nist atomic clock in boulder, colorado. A team of atomic physicists continually measure every second of every day to an accuracy of ten billionths of a second a day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a cesium 13...

  • Page 5

    Program mode programming note: if 20 seconds is allowed to pass during programming modes the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If for program settings iv through xi, you don’t leave the program mode you can adva...

  • Page 6

    6 (appearing in the time lcd) will flash when a search is in progress, will remain steady when the signal has been received, and nothing will be displayed in all other situations. If the wwvb time has not been received after 10 minutes of battery installation, you may manually set the time or leave ...

  • Page 7

    7 iv. Time zone setting the default time zone is est (eastern standard time), to change this setting: 1. Press and hold the mode/set button for 5 seconds, or until “lcd 5” flashes in the time lcd. 2. Press the mode/set button four more times; “-5” should flash in the time lcd. 3. Select your appropr...

  • Page 8

    8 v. Daylight saving time (dst) setting 1. Press and hold the mode/set button for 5 seconds, or until “lcd 5” flashes in the time lcd. 2. Press the mode/set button 5 more times to reach the dst selection mode. Dst 1 is the default setting and both “dst” and “1” are flashing in the time lcd. 3. Dst 1...

  • Page 9

    9 vii. Setting the date note: this is only necessary if you do not wish to wait for the wwvb reception. All manual set data will be over- ridden by the reception of the wwvb signal. 1. Press and hold the mode/set button for 5 seconds, or until “lcd 5” flashes in the time lcd. 2. Press the mode/set b...

  • Page 10

    10 4. Press the ch/+ button to shift °f to °c, and back. 5. Press the mode/set button to confirm and to advance to the weather forecast sensitivity setting. Ix. Setting weather forecast sensitivity (hpa) note: a higher hpa (hekto pascal) setting decreases the forecasting sensitivity of the unit, a f...

  • Page 11

    11 for areas with significant air pressure changes. 5. Press the mode/set button to confirm and advance to set the relative or absolute display setting. X. Displaying relative hpa/inhg or absolute hpa/inhg note: air pressure can be displayed in four different measures: relative hpa, absolute hpa, re...

  • Page 12

    12 4. Press the ch/+ button to toggle through the absolute and relative options. 5. Press the mode/set button to confirm and to advance to the relative manual program, or to return to normal operation— xi. Manually setting the relative air pressure 1. Press and hold the mode/set button for 5 seconds...

  • Page 13

    13 xiii. 12 or 24 hour time setting 1. Press and hold the mode/set button for 5 seconds, or until the “lcd #" of your choice flashes in the time lcd. 2. Press the mode/set button once more to reach the 12/24 time setting mode. 3. Press the ch/+ button to toggle between 12 and 24-hour time. 4. Press ...

  • Page 14

    Features of the ws-7059u i. Weather forecast the weather forecasting feature is estimated to be 75% accurate. By adjusting the sensitivity setting, you can achieve a better accuracy of forecast. The weather forecast is based solely upon the change of air pressure over time. In areas where the weathe...

  • Page 15

    15 change to occur quickly. If the symbols do not change then the weather has not changed or the change has been slow and gradual. If this happens on a regular basis, it may be necessary to adjust the weather forecast sensitivity. 2. Weather tendency arrows other possible displays in the tendency lc...

  • Page 16

    16 improve. If the bars are dropping (lower on the right of the graph than the left) then the air pressure has a falling trend, and the weather should worsen. 2 hpa of change equals 0.06 inhg of change. Note: the air pressure history is taken every hour by averaging the last 11 readings (taken every...

  • Page 17

    17 c. The minimum temperature will be displayed for a period of 20 seconds before the unit returns to the current time, date, temperature, and humidity readings. 2. Viewing the maximum indoor temperature and humidity a. Press the min/max/reset button twice (once if pressed while “min” appears in the...

  • Page 18

    18 iv. Adding outdoor remote control senders (optional) the ws-7059u is able to receive signals from 3 different remote control senders (rcs).The rcs model(s) that you choose will come with their own set of instructions— follow these instructions for a complete guide to setting up. When the rcs unit...

  • Page 19

    19 1. It is necessary to remove the batteries from all units currently in operation. 2. Remove the battery covers to all rcs units. 3. Place all rcs units in a numeric sequential order (if more than one unit is to be installed). 4. In sequential order, install batteries. 5. Install batteries into th...

  • Page 20

    20 data was recorded. Pressing this button a second time will display the same data for the maximum recordings. V. Mounting note: before permanently mounting ensure that the indoor temperature station is able to receive wwvb signals from the desired location. Also, extreme and sudden changes in temp...

  • Page 21

    21 2. Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall. 3. Place the indoor temperature station onto the screw using the hanging hole on the backside. Gently pull the station down to lock the screw into place..

  • Page 22

    22 troubleshooting problem: no reception of wwvb time signal. Solution: 1) wait overnight for signal. 2) be sure weather station is at least 6 feet from any electrical devices, such as televisions, computers, or other radio-controlled clocks. 3) remove batteries for five minutes, reinsert and leave ...

  • Page 23

    23 maintenance and care instructions • extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • do not submerge in water. • immedi...

  • Page 24

    24 specifications radio controlled time signal: wwvb recommended operating temperature: weather station: 32 °f to 122°f (0°c to 50°c) lcd contrast: 8 levels temperature measuring range: indoor: 32 °f to 122°f with 0.2°f resolution. (0 °c to 50°c with 0.1 °c resolution) (“ofl” displayed if outside th...

  • Page 25

    25 data checking intervals: indoor temperature: every 10 seconds indoor relative humidity: every 20 seconds power supply (alkaline batteries recommended): 3 x aa, iec lr6, 1.5v battery dimensions (l x w x h): 4.53 x 7.05 x 1.18 inches (115 x 179 x 30 mm) warranty information la crosse technology pro...

  • Page 26

    26 this product is not a toy. Keep out of childre’s reach. This warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to y...