La Crosse Technology WS-7091UD Instruction Manual

Other manuals for WS-7091UD: Instruction Manual

Summary of WS-7091UD

  • Page 1

    Hanging hole battery compartment lcd display wireless weather station instruction manual congratulations on purchasing this state-of-the-art weather station as an example of fine design and quality piece of engineering. The operation of this product is simple and straightforward. By reading this ins...

  • Page 2

    Compartment. 5. Replace the front cover while ensuring that the batteries do not spring free from the contacts as this may cause transmission start up problems (should this happen see resetting below) 6. Your weather station is now operational. Note: for securing the product into place, please see “...

  • Page 3

    1. After inserting the batteries, all the segments on the lcd will light up briefly before displaying the time and all the other modes. Note: please check that the outdoor temperature is received on the lcd. Should the signal not be received, then see checking for 433mhz reception below. Indoor temp...

  • Page 4

    Location as being a possible change in air-pressure when really it is due to the slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 hours as this will allow time for operation at a constant altitude. The weather tendency indicator working together with the weather ic...

  • Page 5

    Note: when the 433mhz signal is received correctly, do not re-open the battery cover of either the transmitter or temperature station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see resetting below) otherwise tran...

  • Page 6

    Resolution (“ofl“ display if outside of this range) relative humidity measuring range : 25% to 95% with 1% resolution (“--.-” displayed if outside this range) relative air pressure hpa : 28.69hpa to 30.45hpa hekto –pascal setting (hpa) : 2hpa to 4hpa air pressure history : for the past 72 hours (1hp...

  • Page 7

    This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept interference received, including interference that may cause undesired operation..