1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. WS-7138U
  5. Instruction Manual

La Crosse Technology WS-7138U Instruction Manual

Manual is about: Wireless 433 MHz Wireless Weather Station

Summary of WS-7138U

  • Page 1

    Ws-7138u wireless 433 mhz wireless weather station instruction manual.

  • Page 2

    2 table of contents topic page inventory of contents/additional equipment 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode program sequence and default settings 6 function keys 7 setting the temperature format 8 setting 12/ 24-hr time mode 8-9 setting the time 9 setti...

  • Page 3

    Inventory of contents 1. The indoor weather station (figure 1). 2. One remote temperature/humidity sensor with mounting bracket (figure 2). 3. Three each, ½” philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. Figure 2 figure 1 battery compartment batter...

  • Page 4

    4 quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature/humidity sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature/hu...

  • Page 5

    Detailed set-up guide i. Battery installation a. Remote temperature/humidity sensor 1. Remove the remote temperature/humidity sensor from the mounting bracket. 5 2. Remove the screw from the back of the remote temperature/humidity sensor that secures the battery cover door. 3. Remove the battery cov...

  • Page 6

    6 seconds, and reinstall making sure to install batteries into the remote temperature/humidity sensor first. Program mode programming note: if 30 seconds is allowed to pass, or the in/out, set/ch button is pressed during the programming mode, the unit will confirm/set the last information entered—th...

  • Page 7

    Ii. Function keys the function buttons are located directly below the lcd display. The function of each button is as described below: • in/out, set/ch o press for approximately three seconds to enter the setting mode. O use to enter the setting mode for the following settings: temperature unit 12hr/...

  • Page 8

    Iii. Selecting °f or °c 1. Press and hold the in/out, set/ch button for 3 seconds. 2. Either ” °f” or “°c” will flash in the time/date lcd. 3. Press and release the min/max, + button to select the temperature format. 4. Press and release the in/out, set/ch button to confirm and advance to the 12hr/2...

  • Page 9

    5. Press and release the min/max, + button to select 12 or 24-hour time format. Note: when in the 12-hour format “p.M.” will appear to the left of the hour in the time lcd between the hours of noon and midnight. 6. Press and release the in/out, set/ch button to confirm and advance to the time settin...

  • Page 10

    Vi. Setting the year, date and month 1. Press and hold the in/out, set/ch button for 3 seconds. 2. Either ” °f” or “°c” will flash in the time/date lcd. 3. Press and release the in/out, set/ch button four times. 4. The year will flash in the time/date lcd. 5. Press and release the min/max/ + button ...

  • Page 11

    11. Press and release the in/out, set/ch button to confirm the settings and exit the setting mode. Features of the ws-7138u humidity level bar graph maximum readings remote temp/humidity sensor channel indicator comfort outdoor readings minimum readings remote sensor reception icon indoor readings i...

  • Page 12

    12 ii. Outdoor temperature and humidity • the temperature received from the remote temperature/humidity sensor is displayed in the temperature/humidity portion of the lcd. O the current outdoor humidity is also displayed in the bar graph at the top of the lcd. • when there is more than one remote se...

  • Page 13

    13 1. Press the min/max/ + button once. 2. The display will now show the date and month at the bottom of the lcd. 3. Press and release the min/max/ + button. 4. “max” appears above the temperature and the temperature flashes. A. The time of the maximum temperature reading is displayed in the time/da...

  • Page 14

    14 18. “min” remains above the temperature and the humidity and bar graph remain flashing a. The date of the minimum humidity reading is displayed in the time/ date portion of the lcd 19. Press and release the min/max/ + button to exit the indoor min/max mode. B. Viewing the outdoor temperature/humi...

  • Page 15

    15 8. “min” appears above the temperature and the temperature flashes. A. The time of the minimum temperature reading is displayed in the time/ date portion of the lcd. 9. Press and release the min/max/ + button. 10. “min” remains above the temperature and the temperature remains flashing. A. The da...

  • Page 16

    16 iv. Adding remote temperature/humidity sensors (optional) the ws-7138u is able to receive signals from 2 different remote temperature/humidity sensors.The remote temperature/humidity sensor model(s) that you choose will come with their own set of instructions— follow these instructions for a comp...

  • Page 17

    17 5. Install batteries into the indoor weather station. 6. Follow the detailed set-up guide for programming and operating instructions. B. Viewing and operating with multiple remote temperature sensor units 1. To view the temperature of a different remote temperature/humidity sensor unit, press and...

  • Page 18

    18 humidity reading in the temperature/ humidity portion of the lcd within 4 minutes of setting up. I. The remote temperature/humidity sensor the remote temperature/humidity sensor can be mounted in three ways: • mounting with screws • mounting with adhesive tape • using the bracket as a stand a. Mo...

  • Page 19

    19 5. Position the remote temperature/humidity sensor in the desired location, ensuring that the indoor weather station can receive the signal. C. Mounting using the stand the mounting bracket can be used as a stand by simply attaching the bracket to the bottom of the temperature/ humidity sensor. O...

  • Page 20

    20 4. Gently pull the indoor weather station down to lock the screw into place. Troubleshooting note: for problems not solved, please contact la crosse technology. Problem: the lcd is faint solution: replace the batteries problem: no outdoor temperature/ humidity is displayed. Solution: 1) remove al...

  • Page 21

    21 • do not submerge in water. • immediately remove all low powered batteries to avoid leakage and damage. • opening the casings invalidates the warranty. Do not try to repair the unit. Contact la crosse technology for repairs. Specifications temperature measuring range: indoor: 14.2 °f to 122.0°f w...

  • Page 22

    22 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to th...

  • Page 23

    23 interference.. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-...

  • Page 24

    24 fcc disclaimer this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Fcc id: om...