Ws-7159u wireless 433 mhz radio-controlled weather station instruction manual.
2 table of contents topic page inventory of contents/additional equipment 3 about wwvb 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode program sequence and default settings 6 function keys 6 setting the lcd contrast 7 setting the time zone 7-8 daylight saving time se...
3 inventory of contents 1. The indoor weather station (figure 1). 2. One remote temperature sensor with mounting bracket (figure 2). 3. Three each, ½” philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. Additional equipment (not included) 1. Three fresh ...
4 quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor firs...
5 a. Remote temperature sensor 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 aa batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not sprin...
6 time-date readings. If you don’t leave the program mode during the programming of sections iv through xi, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting. I. Pr...
7 note: there are 8 lcd contrast levels to choose from—“lcd 0” is the lightest, and “lcd 7” is the darkest. 3. Press and release the in button to select the level you desire. 4. Press and release the set button to confirm and advance to the time zone setting. Iv. Time zone setting 1. Press and hold ...
8 haw; hawaii -10 6. Press and release the set button to confirm and advance to the daylight saving time setting. V. Daylight saving time (dst) setting 1. Press and hold the set button for 5 seconds. 2. “lcd” will show in the time lcd and the number setting will flash. 3. Press and release the set b...
9 vii. 12 or 24 hour time setting 1. Press and hold the set button for 5 seconds. 2. “lcd” will show in the time lcd and the number setting will flash. 3. Press and release the set button four times. 4. “12h” or “24h” will flash in the time lcd. 5. Press and release the in button to select 12 or 24-...
10 may manually set the time or leave the time function alone (reception will occur regardless). B. Manual time setting note: when in the 12-hour format “p.M.” will appear to the left of the hour in the time lcd between the hours of noon and midnight. 1. Press and hold the set button for 5 seconds. ...
11 10. Press and release the set button to confirm and advance to the snooze setting. X. Setting the snooze note: this is an unused function of the indoor weather station and should be disregarded. The setting has no bearing on the operation. Please press and release the set button to advance to sel...
12 4. Either “1”, “2” or “3” will flash in the time lcd. 5. Press and release the in button to select the forecast sensitivity 6. Press and release the set button to confirm the forecast sensitivity and complete the programming. Features of the ws-7159u i. Weather forecast the weather forecasting fe...
13 another floor). In areas where the weather is not largely affected by the change of air pressure, the sensitivity setting should be set to 1. A. Weather icons there are 3 possible weather icons that will be displayed in the forecast lcd: sunny—indicates that the weather is expected to improve (no...
14 is expected to become worse or remain poor. No arrow means the pressure is stable. Ii. Indoor temperature, humidity, and comfort level indicator the current indoor temperature (viewed on the left) and relative humidity (viewed on the right) are displayed in the indoor lcd. The comfort level indic...
15 2. Press the in button again (once while “min” is still displayed, twice otherwise). “max” appears above the indoor temperature and the lcd will flash, indicating that the maximum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. 3. Whi...
16 v. Adding remote temperature sensors (optional) the ws-7159u is able to receive signals from 3 different remote temperature sensors.The remote temperature sensor model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Fol...
17 2. To view the minimum/maximum temperature: first select which remote temperature sensor to read data from (indicated by the “boxed” number), then press the out button. Pressing this button once will display the minimum temperature, and the date and time the data was recorded. Pressing this butto...
18 2) place the mounting bracket over the desired location. 3) through the three screw holes of the bracket, mark the mounting surface with a pencil. 4) screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. 5) insert the remote temperature sensor into t...
19 2) fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall. 3) place the indoor weather station onto the screw using the hanging hole on the backside. 4) gently pull the indoor weather station down to lock the screw into place. Troubles...
20 because of the shielding effect of the display's case. In addition, the case can act as a heat sink to absorb and store heat from external sources (i.E. Handling of the case or radiant heat). Also, the much greater range of the outdoor temperature sensor requires a different calibration curve tha...
21 transmission range: 330 feet (in open space). Power supply: weather station: 2 x aa, iec lr6, 1.5v. Temperature transmitter: 2 x aa, iec lr3, 1.5v. Battery life cycle: approximately 12 months. Recommended battery type: alkaline. Dimensions (h x l x w) weather station (without stand): 3.54 x 1.18 ...
22 this warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information...