1. DL manuals
  2. La Crosse Technology
  3. Weather Station
  4. WS-7395U
  5. Instruction Manual

La Crosse Technology WS-7395U Instruction Manual

Manual is about: Wireless 433 MHz Radio-controlled Weather Station

Summary of WS-7395U

  • Page 1

    Ws-7395u wireless 433 mhz radio-controlled weather station instruction manual.

  • Page 2

    Table of contents topic page inventory of contents/additional equipment 3 about wwvb 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode program sequence and default settings 6 function keys 6 setting the lcd contrast 6-7 setting the time zone 7 daylight saving time sett...

  • Page 3

    Inventory of contents 1. The ws-7395u weather station (figure 1). 2. One tx8u remote temperature/humidity sensor (figure 2). 3. One tx15u wind speed sensor (figure 3). 4. Mounting hardware 5. Instruction manual and warranty card. Additional equipment (not included) 1. Three fresh aa 1.5v batteries f...

  • Page 4

    Quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. 1. Have the indoor weather station, remote temperature/humidity sensor and wind speed sensor 3 to 5 feet apart. 2. Insert the telephone plug (rj-11) from the wind speed sensor into the receptacle on the re...

  • Page 5

    Detailed set-up guide battery installation the first step to powering up the weather station is to insert the connector (rj11) at the end of the wire attached to the wind speed sensor to the remote temperature/humidity sensor. Please ensure when doing this that the connector is inserted with the pro...

  • Page 6

    Program mode programming note: if 30 seconds are allowed to pass, or the wind/snz button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during t...

  • Page 7

    3. Press and release the alm/+ button to select the level you desire. 4. Press and release the set button to confirm and advance to the time zone setting. Iv. Time zone setting 1. Press and hold the set button for 5 seconds. 2. “lcd” will show in the time lcd and the number setting will flash. 3. Pr...

  • Page 8

    Vii. 12 or 24 hour time setting 1. Press and hold the set button for 5 seconds. 2. “lcd” will show in the time lcd and the number setting will flash. 3. Press and release the set button four times. 4. “12h” or “24h” will flash in the date lcd. 5. Press and release the alm/+ button to select 12 or 24...

  • Page 9

    Ix. Setting the year, day and month note: reception of the wwvb signal will also set the date and day. The reception of the signal will override any programmed date and day. 1. Press and hold the set button for 5 seconds. 2. “lcd” will show in the time lcd and the number setting will flash. 3. Press...

  • Page 10

    Xii. Setting the forecast sensitivity note: the forecast sensitivity can be adjusted to allow for areas that have a higher or lower sensitivity to changing air pressure (for example coastal areas have more pressure change than areas such as southern arizona). The numbers correspond to the amount of ...

  • Page 11

    I. Weather forecast the weather forecasting feature is estimated to be 75% accurate and is for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time. The ws-7395u averages past air-pressure readings to provide an accurate forecast—creating a necessit...

  • Page 12

    2. Press and release the in/hr button again (once while “max” is still displayed, twice otherwise). “min” appears to the right of the indoor temperature, indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. 3. Whil...

  • Page 13

    V. Moon phase there are 12 moon phases shown on the indoor weather station; the black portion signifies the portion of the moon visible in the sky. Thus, when the moon icon is all black, it is a full moon. Vi. Viewing the current, maximum and minumum dew point to view the current dew point: 1. Press...

  • Page 14

    To view the current wind chill: 1. Press and release the wind/snz button. 2. The wind chill value will display at the bottom of the wind speed lcd. To view the maximum and minimum wind/wind chill values: 1. Press and hold the wind/snz button for 3 seconds. 2. The wind speed lcd will now show the max...

  • Page 15

    Mph km/hr knots 0 calm still, calm air, smoke will rise vertically. Water is mirror-like. 1 1-3 mph 1-5 kph 1-3 knots light air rising smoke drifts, wind vane is inactive. Small ripples appear on water surface. 2 4-7 mph 6-11 kph 4-6 knots light breeze leaves rustle, can feel wind on your face, wind...

  • Page 16

    High waves (6 meters), rolling seas, dense foam, blowing spray reduces visibility. 10 55-63 mph 89-102 kph 48-55 knots whole gale or storm trees are broken or uprooted, building damage is considerable. Large waves (6-9 meters), overhanging crests, sea becomes white with foam, heavy rolling, reduced ...

  • Page 17

    Note: before permanently mounting ensure that the indoor weather station is able to receive wwvb signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station, and changes in elevation will result with inaccurate weather f...

  • Page 18

    Ii. The remote wind speed sensor the remote wind speed sensor can be mounted two ways: • with the use of screws • using nylon straps a. B. Mounting with screws 1) unlock the mounting bracket from the remote wind speed sensor leaving the wire going through the bracket. 2) place the mounting bracket o...

  • Page 19

    Troubleshooting note: for problems not solved, please contact la crosse technology. Problem: no reception of wwvb time signal. Solution: 1) wait overnight for signal. 2) be sure indoor weather station is at least 6 feet from any electrical devices, such as televisions, computers, or other radio- con...

  • Page 20

    Specifications weather data measuring range: indoor: 14.2 °f to 139.8°f with 0.1°f resolution (0 °c to 59.9°c with 0.1 °c resolution) “ofl” displayed if outside this range outdoor and dew point: -21.8 °f to 157.8°f with 0.1°f resolution (-29.9 °c to 69.9°c with 0.1 °c resolution) “ofl” displayed if ...

  • Page 21

    Warranty information la crosse technology provides a 1-year warranty on this weather station. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the weather station in for repairs, contact la crosse technology. The weather station will be ...

  • Page 22

    22 all trademarks and patents are acknowledged..