Ws-8055u radio controlled moon phase clock instruction manual.
2 table of contents topic page inventory of contents/ additional equipment 3 about wwvb 3 quick set-up guide 3 detailed set-up guide battery installation 4 program mode function buttons 5 time zone setting 5 dst (daylight saving time) setting 6 language selection 6 time setting 6 calendar setting 7 ...
3 inventory of contents 1) ws-8055u 2) instruction manual and warranty card. Additional equipment (not included) 1) two fresh 1.5v aa batteries. About wwvb (radio controlled time) the nist (national institute of standards and technology—time and frequency division) wwvb radio station is located in f...
4 detailed set-up guide i) battery installation note: to avoid start-up problems make sure that the batteries do not spring free. A) moon phase clock 1) remove the battery cover, located on the backside of the unit. 2) observe the correct polarity, and install 2 aa batteries. 3) replace the battery ...
5 program mode to enter the program mode hold down the “set” button for 2 seconds, until “-5est” flashes in the date lcd. The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the moon phase clock. Complet...
6 iii) dst (daylight saving time) setting note: the dst default is “on”, meaning that the wwvb will automatically change the time according to daylight saving time in the spring and fall. For areas that do not recognize dst changes (arizona and parts of indiana) turn the dst “off”. 1) hold down the ...
7 vi) calendar setting note: when the wwvb signal is found, that date will over-ride the manually set date. 1) hold down the “set” button for 2 seconds (the selected time zone will flash), press the “set” button 5 more times, until the default year “00” flashes in the date lcd. 2) press the “+” butt...
8 features & operations i) changing display mode (day, seconds, and temperature) there are three possible display modes to view the day, seconds, and temperature. The month&date/weekday/moon phase/indoor temperature is the default. To change the display: 1) press the “+” button. The display should n...
9 c) activating the snooze function 1) while the alarm is sounding, press the “snooze” button to activate the snooze function. The alarm “sound” icon and “snooze” icon (to the right of the time) will flash. The duration of the snooze function is 10 minutes, then the alarm will resume. D) suspending ...
10 maintenance & care • extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. • clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. • do not submerge in water. • immediatel...
11 specifications temperature: measuring range: 32 °f to 122°f with 0.2°f resolution (0 °c to 50°c with 0.1°c resolution) outside range: “ofl” will be displayed checking intervals: every 10 seconds power source: battery type: 2 x aa, iec lr6, 1.5v (alkaline) battery life: approximately 12 months dim...
12 for warranty work, technical support, or information contact la crosse technology, ltd 2809 losey blvd. S. La crosse, wi 54601 phone: 608.782.1610 fax: 608.796.1020 e-mail support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) website www.Lacro...
