La Crosse Technology WS-8157 Instruction manual

Other manuals for WS-8157: Instruction Manual

Manual is about: ATOMIC CLOCK WITH OUTDOOR TEMPERATURE AND WEATHER FORECAST

Page of 10

Download

Print this page

Bookmark us

Holder

OUTDOOR TEMPERATURE TRANSMITTER:

WS-8157

OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA

TURE

AND WEATHER FORECAST

Instruction Manual

FEATURES:

ATOMIC CLOCK:

• Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the

steps below:

Insert finger or other solid object in the space at the bottom center of the battery compartment

and lift up to remove the cover.

Insert batteries observing the correct polarity (see marking inside battery compartment).

Replace compartment cover.

•

WWVB Radio controlled time with manual time setting

DO NOT SET THE CLOCK.

•

12/24 hour time display

•

Time display: hour, minute, second

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

Function keys

LCD1

display

Foldable stand

Battery cover

Hanging holes

LCD2

display

•

Alarm setting with snooze function

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the

steps below:

•

Calendar display

•

Weekday display (4 languages to choose from: English, French, Spanish and German)

Remove the cover.

Insert the batteries, observing the correct polarity (see marking inside battery compartment).

•

Time zone setting

Replace the battery cover on the unit.

•

Daylight savings time ON/OFF option (DST)

Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.

•

ºC or ºF temperature display selectable

•

Indoor temperature display

•

Outdoor temperature display via 433MHz transmission

•

Wall mount or freestanding

•

Weather forecast for next 12 to 20 hours based on changing air pressure

1 2 3 4 5 6 7 Next › »

Summary of WS-8157

Page 1
Holder outdoor temperature transmitter: ws-8157 omic clock with outdoor wireless tempera at ture and weather forecast instruction manual features: atomic clock: • remote transmission of outdoor temperature to the atomic clock by 433 mhz signals • wall mounting case to install and replace batteries i...
Page 2
To display the alarm time in normal mode display to display the alarm time in normal mode display alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. Void using rechargable batteries. To exit the setting modes to exit the setting modes note: do not set the cl...
Page 3
Manual settings note: weather icons if the atomic clock has already successfully received the wwvb time signal and displays the correct time and date, then the manual settings can be skipped. There are 3 possible weather icons that will be displayed in the lcd 2: after completion of the above descri...
Page 4
• -8 pst (pacific time), • -9 ala (alaska time), • -10 haw (hawaii time). • "gmt” will be displayed if set to gmt (0). 2. Press and release the set key to enter the “dst setting“. Dst setting (daylight saving time) 1. The on digit will start flashing on lcd1. Set the dst on or off by pressing the + ...
Page 5
Outdoor temperature transmitter: °c or °f temperature setting the temperature is measured and transmitted to the atomic clock every 1 minute. The atomic clock will update the temperature display every 5 minutes. 1. The characters “°c” or “°f” will start flashing on lcd1 (default setting °f). By use ...
Page 6
In case the atomic clock is not able to detect the wwvb-signal (disturbances, transmitting distance, etc.), the time can be manually set (please refer to notes on manual time setting) . 1. Press the + key. The display should now show the month&date/weekday/seconds/outdoor temperature. 2. Press the +...
Page 7
3) remove the protective strip from the other side of the tape. Position the outdoor temperature transmitter in the desired location, ensuring that the atomic clock can receive the signal. Wall mounting 1) using a straightedge, horizontally space at 2-3/4 of an inch (70 mm) three screw positions on ...
Page 8
Care and maintenance: liability disclaimer: • avoid placing the units in areas prone to vibration and shock as these may cause damage. • the manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. ...
Page 9
Warranty information la crosse technology provides a 1-year warranty on this atomic clock. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the atomic clock in for repairs, contact la crosse technology. The atomic clock will be repaired ...
Page 10
Ws-8157 atomic clock with outdoor temperature and weather forecast instruction manual.