- DL manuals
- La Crosse Technology
- Weather Station
- WS-9021U
- Owner's Manual
La Crosse Technology WS-9021U Owner's Manual
Summary of WS-9021U
Page 1
0 contents language page _______________________________________________________________ english french spanish.
Page 2: Table Of Contents
1 table of contents topic page inventory of contents quick setup detailed setup guide battery installation 12 or 24 hour time display time setting features min and max temperature resetting min & max temperature adding additional thermo-hygro sensors viewing & operating with multiple thermo-hygro se...
Page 3: This Product Offers:
2 this product offers: instant transmission is the state-of-the-art new wireless transmission technology, exclusively designed and developed by la crosse technology. Instant transmission offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your...
Page 4
3 figure 1 low battery indicator max icon 12 or 24 hour time display set/channel button minimum/maximum & plus button outdoor temperature (°f or °c) sensor signal reception icon.
Page 5: Figure 2
4 figure 2 inventory of contents 1. Wireless temperature station (figure 1) 2. Wireless temperature sensor (tx29) and mounting bracket. (figure 2) 3. 3 each, 1/2” philips screws. 4. One strip of double sided adhesive tape. 5. Instruction manual and warranty card. Additional equipment (not included) ...
Page 6: Quick Setup
5 quick setup hint: use good quality alkaline batteries; avoid rechargeable batteries. 1. Have the wireless temperature station and temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 5 minutes. 3. Place the batteries into the temperature sensor first andnext into the ...
Page 7: Detailed Setup Guide
6 note: fog and mist will not harm your temperature sensor, but direct rain must be avoided. Detailed setup guide battery installation - when one temperature sensor is being used 1. First, insert the batteries to the temperature sensor (see “temperature sensor” below). 2. Within 2 minutes of powerin...
Page 8: Temperature Sensor
7 temperature sensor 1. Remove the battery cover. 2. Observing the correct polarity, install 2 “aa” alkaline batteries—make sure they do not spring free, or start-up problems may occur. 3. Replace the battery cover. Wireless temperature station note: after the batteries are installed, do not press a...
Page 9
8 1. Remove the battery cover on the back of the wireless temperature station. 2. Observing the correct polarity, install 2 “aa” alkaline batteries. 3. Replace battery cover. Battery compartment battery cover sensor signal reception icon*.
Page 10: Note:
9 • *when the signal is successfully received by the temperature station, the icon will be switched on. (if not successful, the icon will not be shown in lcd) so the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of th...
Page 11: Time Setting
10 time setting 1. After exiting the 12/24 hour setting, the hour will begin flashing in the time display. 2. Press and release the min/max/+ button to select the desired hour. Note: "pm" will appear to the left of the time display for pm hours. For am hours, that area will remain blank. 3. Press an...
Page 12
11 3. Press and release the min/max/+ button once more to return to the current temperatures. Resetting the minimum and maximum readings: user may reset the minimum and maximum temperature data to the current value by the following step: press and hold the min/max/+ key for about 3 seconds to reset ...
Page 13
12 lcd will light up briefly. Following the indoor temperature and the time as 12:00 will be displayed. If they are not shown in lcd after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. 4. The outdoor temperature from the first sensor (channel 1) should th...
Page 14
13 successfully received. If this is not happen, user shall restart the setting up from step 1. Note: you must insert the batteries into the third sensor within 45 seconds of reception of the second sensor. Important: transmission problems will arise if the setting for multiple sensors is not follow...
Page 15: Mounting
14 mounting note: to achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the temperature sensor on an outside north-facing wall (under the eve of a house is ideal). The remote temperature sensor should be placed in a dry, shaded area. The remote tempera...
Page 16: Temperature Sensor
15 ½ reduction typical of most obstructions. It is possible to receive a signal through these materials, however maximum range will be much less due to their tendency to absorb or reflect a much larger portion of the sensor’s signal . Temperature sensor the temperature has been designed to be hanged...
Page 17: To Wall Mount:
16 to wall mount: 1. Remove the mounting bracket from the temperature sensor. 2. Mount using either screws or adhesive tape. 3. Reattach the temperature sensor to the mounting bracket. Wireless temperature station 1. The wireless temperature station comes with the table stand attached to the back of...
Page 18: Troubleshooting
17 2. To wall mount, push the table stand flat against the wireless temperature station (if it isn’t already flat). Fix a screw (not included) into the desired wall, and place the wireless temperature station onto the screw using the hanging hole on the backside. Gently pull the wireless temperature...
Page 19
18 4) using good quality alkaline batteries, place the batteries back into the outdoor temperature sensor; making sure they are installed according to the diagrams in the battery compartment. 5) taking care not to press any buttons, reinstall the batteries in the wireless temperature station accordi...
Page 20: Specifications
19 specifications transmitting frequency 915 mhz temperature measuring ranges indoor 14.1 °f to 139.8°f with 0.2°f resolution. Outdoor -39.8 °f to 139.8°f with 0.2°f resolution. Transmitting range maximum 330 feet (100m) open space temperature checking interval indoor every 15 seconds outdoor every ...
Page 21: Dimension: (H X W X D)
20 dimension: (h x w x d) receiver 2.76 x 1.14 x 4.54 in (70 x 29 x 115.2 mm) temperature sensor 1.50 x 0.83 x 5.05 in (38.2 x 21.2 x 128.3 mm) battery life up to 24 months warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects...
Page 22
21 purchase to la crosse technology, ltd or la crosse technology, ltd’s authorized service center. La crosse technology, ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limit...
Page 23
22 presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized la...
Page 24
23 this warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information...
Page 25
24 question? Instructions? Please visit: www.Lacrossetechnology.Com/9021 all rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook ...