Ws-9032u wireless 433 mhz weather station instruction manual contents language page english 2 french 23 spanish 46 r fcc id: omo-01rx (receiver), omo-01tx (transmitter) fcc disclaimer this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this d...
Table of contents topic page inventory of contents/ additional equipment 3 about wwvb 3 quick set up guide 4 detailed set up guide battery installation 4 start up sequence 6 explanation of lcd information 7 function key layout 8 program mode overview of programming sequence 8 lcd contrast setting 8 ...
3. Do not press any buttons for at least ten minutes. If a button is pressed before the indoor weather station has received information from the tx4u sensor, no data will be received from that sensor until reset. 4. Replace the battery cover. Ii. Start up sequence a. Initial start 1. Immediately aft...
Gb p.10 gb p.11 1. Press and hold the “set” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “set” button five more times to advance to the manual hour setting. 4. The hour will begin to flash at the top of the displ...
A. From the normal display mode, press and release the “out/+” key once to view the outdoor maximum temperature and humidity (“max” will be displayed above the outdoor temperature and humidity). B. Press and release the “out/+” key again to view the outdoor minimum tempera- ture and humidity. C. Pre...
2. Mounting with adhesive tape a. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. B. Remove the protective strip from one side of the tape. C. Press firmly onto the designate...
1 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to the...
2 adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. La crosse technology, ltd will not assume liability for incidental, consequential, punitive, or other similar damages associated with the operation or malfuncti...
3 fcc disclaimer this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. La crosse t...
