La Crosse Technology WS-9170U-IT Instruction Manual
1
WEATHER STATION
WS-9170U-IT
Instruction Manual
Congratulations on purchasing this state-of-the-art weather station as an example of excellent
design and innovative technology. This thermo-hygrometer checks indoor temperature/humidity
and outdoor temperature/humidity with wireless transmission. To promote a healthy living
environment, it features a comfort level indicator and a ventilation tip – opening or closing the
window to help improve the indoor ambient condition.
INSTANT TRANSMISSION
is the state-of-the-art new
wireless transmission technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY. INSTANT
TRANSMISSION
offers you an immediate update (every 4
seconds!) of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
This product offers:
2
THE WEATHER STATION
Hanging hole
Battery
compartment
Foldout stand
Function keys
LCD
display
Function
key
3
FEATURES
Indoor comfort level indicator (DRY, COMFORT, WET)
Indoor ambient change indicator (MORE WET, NO CHANGE, MORE DRY)
OPEN/CLOSE window advice
Indoor and outdoor temperature display in ºF / ºC with MIN/MAX records
Indoor and outdoor humidity display in %RH with MIN/MAX records
Manual reset of all MIN/MAX records
Low battery indicators
Wall mounting or table standing (foldout stand)
Outdoor Thermo-hygro Transmitter
Remote transmission of outdoor temperature and humidity to weather station by
915MHz signal
Water-resistant casing
Wall mounting case
4
SET UP
Note:
This weather station receives only one outdoor transmitter.
IMPORTANT
Do not mix old and new batteries.
Do not mix alkaline, standard, or rechargeable batteries.
1.
First, insert the batteries into the thermo-hygro transmitter and place 5-10 feet from the weather
station.
2.
Within 30 seconds, insert batteries into weather station. Once the batteries are in place, all
segments of the LCD will light up briefly. Then the indoor temperature, humidity and comfort level
indicator will be displayed. If these are not displayed after 60 seconds, remove the batteries and
wait for at least 60 seconds before reinserting them.
3.
After inserting the batteries, the weather station will start receiving data from the transmitter. The
outdoor temperature, humidity and the signal reception icon should then be displayed on the
weather station. If this does not happen after 3 minutes, the batteries will need to be removed
from both units and reset from step 1.
4.
Allow the weather station and transmitter to sit 5-10 feet apart for 15 minutes to establish a good
connection.
5.
In order to ensure successful 915 MHz transmission after the initial set up, maintain an open air
distance, no more than 330 feet (100 meters) between the final position of the weather station and
the transmitter (see notes on “915 MHz Reception” and “Positioning”).