La Crosse Technology WS9245 Instruction Manual

Summary of WS9245

  • Page 1

    19 wireless 868 mhz temperature station instruction manual introduction: congratulations on purchasing this temperature station with wireless 868 mhz transmission of outdoor temperature and display of indoor temperature. With two easy to use function keys, this innovative product is ideal for use in...

  • Page 2

    20 features: temperature station the temperature station • manual time setting (hour and minute display) • time display 24-hour time format • temperature display in degree celsius (°c) • indoor and outdoor temperature display with min/max records • low battery indicator • wireless transmission at 86...

  • Page 3

    21 the outdoor temperature transmitter • remote transmission of outdoor temperature to temperature station by 868 mhz signals • rain proof casing • wall mounting and table-standing • mounting at a sheltered place. Avoid direct rain and sunshine setting up: note: this temperature station can only rec...

  • Page 4

    22 3. After the batteries are inserted, the temperature station will start receiving data signal from the transmitter. The outdoor temperature should then be displayed on the temperature station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset...

  • Page 5

    23 how to install and replace batteries in the temperature transmitter the temperature transmitter uses 2 x aaa, iec lr3, 1.5v batteries. When batteries will need to be replaced, the low battery icon will appear on the lcd of the temperature station. To install and replace the batteries, please foll...

  • Page 6

    24 please participate in the preservation of the environment. Return used batteries to an authorized depot. Function keys: the temperature station has only two easy to use function keys: set key • press and hold for about 3 seconds to enter the manual setting mode. + key • press to make adjustment i...

  • Page 7

    25 outdoor reception signal icon* min/max outdoor temperature lcd screen and settings: * when the signal from the transmitter is successfully received by the temperature station, this icon will be switched on. (if not successful, the icon will not be shown on the lcd). Time indoor temperature in °c ...

  • Page 8

    26 minutes (flashing) hour (flashing) user can therefore easily see whether the last reception was successful (“on” icon) or not (“off” icon). On the other hand, the short blinking of the icon shows that a reception is being done at that time. Manual time setting: to manually set the time of the tem...

  • Page 9

    27 indoor temperature max indoor temperature min indoor temperature the indoor temperature is displayed in the second section of the lcd along with the indoor min/max records: note: • the maximum temperature record for the min indoor temperature can only be up to -10ºc, and the min/max temperature r...

  • Page 10

    28 max outdoor temperature min outdoor temperature outdoor temperature note: • the minimum/maximum temperature resolution is 1°c. • the resolution of the outdoor temperature is 0.1ºc to reset the min/max data: the min/max temperature can be reset manually by pressing and holding the + key for about ...

  • Page 11

    29 2. Avoid positioning the temperature station onto or in the immediate proximity of metal window frames. 3. Using other electrical products such as headphones or speakers operating on the same signal frequency (868mhz) may prevent correct signal transmission and reception. 4. Neighbors using elect...

  • Page 12

    30 the temperature station comes attached with a table stand, which provides the option of table standing the unit in addition to wall mounting. To wall mount: before wall mounting, please check that the outdoor temperature values can be received from the desired locations: 1. Fix a screw (not suppl...

  • Page 13

    31 to wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature transmitter onto the bracket. Note: the mounting surface can affect the transmission range. If, for instance, the unit is attached to a piece of metal, it may then either ...

  • Page 14

    32 • extreme temperatures, vibrations and shocks should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. • when cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the lcd and casings. • do ...

  • Page 15

    33 outdoor data checking interval : every 8 seconds power consumption temperature station : 2 x aa, iec lr6, 1.5v outdoor temperature transmitter : 2 x aaa, iec lr3, 1.5v battery life cycle (alkaline batteries recommended): temperature station : approximately 24 months outdoor temperature transmitte...

  • Page 16

    34 • as stated on the gift box and labeled on the product, reading the “user manual” is highly recommended for the benefit of the user. This product must however not be thrown in general rubbish collection points. • the manufacturer and supplier cannot accept any responsibility for any incorrect rea...

  • Page 17

    35 r&tte directive 1999/5/ec summary of the declaration of conformity : we hereby declare that this wireless transmission device does comply with the essential requirements of r&tte directive 1999/5/ec..