- DL manuals
- La Crosse Technology
- Alarm Clock
- WT-2191
- Instruction Manual
La Crosse Technology WT-2191 Instruction Manual
Summary of WT-2191
Page 1
1 model: wt-2191 radio-controlled travel alarm clock instruction manual.
Page 2: Table of Contents
2 table of contents topic page inventory of contents 1 quick setup 2 detailed setup guide battery installation 3 about wwvb 4-6 programming 6-8 time zone 6 daylight on/off 7 snooze setting 7 time setting 7-8 setting alarms 9-10 operating screens 11-12 traveling 12 troubleshooting 13 maintenance, war...
Page 3: Inventory of Contents
1 inventory of contents 1. Radio controlled clock (figure 1) 2. Instruction manual and warranty card. Figure 1: open.
Page 4: Quick Setup
2 quick setup 1. The alarm clock is packed in the closed position. To open, flip open the cover. 2. The alarm clock requires one aa alkaline battery. Open up the compartment insert the battery to activate. It will start searching for a signal and set to the correct time and date, usually not until o...
Page 5: Detailed Setup Guide
3 detailed setup guide i. Battery installation a. The alarm clock requires one aa alkaline battery. Open up the compartment insert the battery to activate. It will start searching for a signal and set to the correct time and date, usually not until overnight..
Page 6: II.
4 ii. Programming a. Setting the time there are two methods by which the time and date can be set: 1) automatically via wwvb reception, or 2) manually. B. Wwvb (radio-controlled time) this method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Recept...
Page 7: Wwvb:
5 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless). About radio controlled time signal, wwvb: the nist (national institute of standards and technology—time and frequency division) wwvb radio station is located in ft. Co...
Page 8: Programming
6 have created an international standard, measuring a second as 9,192,631,770 vibrations of a cesium-133 atom in a vacuum. C. Programming (includes manual time setting) **to end the programming mode at any time, simply press the snooze button a) press the set button. The us map and time zone will fl...
Page 9
7 b) “dst on” will flash. Press the “+” key to toggle between the daylight saving time on or off (for places that do not follow daylight saving time changes). Press the set key. C) “sno” will show at the bottom of the screen, and a number will flash at the top. This is the setting for the length of ...
Page 10: Programming Sequence
8 f) the year will now flash. Press the “+” key to advance to the correct year. Press the set key. G) the month will now flash. Press the “+” key to advance to the correct month. Press the set key. H) the date will now flash. Press the “+” key to advance to the correct day. Press the set key. I) the...
Page 11: III.
9 iii. Setting the alarms la crosse technology’s travel alarm clock has two separate alarms that can be set. Each alarm has a distinctive sound and operate independently. A. Press and hold the “alm1” (or “alm2” key) key for two seconds to enter the setting mode. The alarm time will flash. Press the ...
Page 12
10 the “alm1” or “alm2” key once, depending on which alarm needs to be activated. C. When the alarm is sounding, pressing the “snooze” will turn it off for the time that was selected in the programming mode (section ii.A.2.C.). The snooze is activated by pressing back on the entire unit while the co...
Page 13: IV.
11 iv. Operating screens a. The exact time will always be displayed in the upper portion of the screen, and the us map will show when the time zone is set to the continental us (with the time zone selected showing in black). The lower portion of the screen has five different screens that can be sele...
Page 14: Traveling
12 4. Alarm 1 time 5. Alarm 2 time c. While in non-alarm mode, pressing the “snooze” bar will show the “alarm1” and “alarm2” briefly in the lower section. V. Traveling a. When traveling, it will only be necessary to change to the appropriate time zone. Please note that the clock will only search for...
Page 15: Troubleshooting
13 troubleshooting note: for problems not solved, please contact la crosse technology via e-mail or phone, or visit our website, www.Lacrossetechnology.Com problem: the time and date will not set initially. Solution: it usually takes overnight before the clock can receive the signal due to the inter...
Page 16: Maintenance and Care
14 maintenance and care instructions • extreme temperatures, vibration, and shock should be avoided to prevent damage to the unit. • clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • do not submerge in water. • do not ...
Page 17: Specifications
15 specifications dimensions: (l x w x h) 2-1/2” x 5/8” x 3-5/8” (62 x 15 x 93 mm). Battery 1 aa alkaline battery battery life approximately 1 year warranty information la crosse technology provides a 1-year warranty on this alarm clock. Contact la crosse technology immediately upon discovery of any...
Page 18
16 this alarm clock. This product is not to be used for medical purposes or for public information. This product is not a toy. Keep out of children’s reach. This warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of ...