1. DL manuals
  2. La Crosse Technology
  3. Alarm Clock
  4. WT-5600
  5. Instruction Manual

La Crosse Technology WT-5600 Instruction Manual

Manual is about: Radio Controlled Projection Alarm

Summary of WT-5600

  • Page 1

    Wt-5600 radio controlled projection alarm instruction manual projection.

  • Page 2

    2 table of contents topic page inventory of contents 3 about wwvb 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode programming sequence 6 function buttons 6 time zone setting 6-7 time setting 7 date setting 8 12/24-hour mode 8 dst (daylight saving time) setting 8 feat...

  • Page 3

    3 inventory of contents 1) wt-5600 alarm clock 2) ac adapter/transformer 3) instruction manual and warranty card. Additional equipment (not included) 1) two fresh 1.5v aa batteries (optional for alarm clock) features of projection alarm 1. Radio-controlled time and date 2. Projection of time 3. Lcd ...

  • Page 4

    4 quick set-up guide 1) insert two aa batteries into the projection alarm and/or plug into wall 2) wait 10 minutes for wwvb reception. 3) if there is no wwvb reception, manually set the time and date (instructions in the program mode). 4) program the settings. 5) mount the wt-5600 in a suitable loca...

  • Page 5

    5 ac adapter receptacle detailed set-up guide battery installation 1. Remove the battery cover. 2. Observe the correct polarity and install 2 aa batteries. 3. In addition or instead of inserting batteries, the ac adapter can be used. Simply plug the adapter into the receptacle on the bottom of the a...

  • Page 6

    6 projection program mode to enter the program mode, hold down the “mode+” button for 2 seconds, until the time zone (“-5” default) flashes in the lower right. The program mode guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entir...

  • Page 7

    7 3. From –5h to –8h, a us map with the highlighted time zone will also be displayed to the right of the time display. 4. Press the “al” button to move to the hour setting or press the “snooze” button to confirm the time zone and return to the display mode. D. Time setting note: when the wwvb signal...

  • Page 8

    8 e. Date setting note: when the wwvb signal is found, that date will over-ride the manually set date. 1. Hold down the “mode/+” button for 2 seconds (the selected time zone will flash), press the “al” button three times until the year flashes. 2. Press the “mode/+” button to select the year. 3. Pre...

  • Page 9

    9 b. Radio-controlled time and date 1. The projection alarm will automatically search for the time signal upon initial set-up and every night. 2. When the signal is being received, there will be a “tower” icon flashing to the right of the time display. 3. When the time signal has been received succe...

  • Page 10

    10 light intensity projection direction c. Projection of time 1. When plugged into an ac outlet, the projection alarm can continuously project the time. 2. When operating on batteries alone, the projection alarm will only project when a button is pressed. 3. The projection will auto-focus for displa...

  • Page 11

    11 alarm is active 2. Activating/deactivating the alarm a. After entering the alarm-setting mode, the alarm is activated. B. To toggle between activating and deactivating the alarm, press the “al” button briefly. “((( •)))” will be displayed to the left of the time display when the alarm is activate...

  • Page 12

    12 f. Changing display mode (day, seconds, and alarm time) there is three possible display modes to view the date, seconds and alarm time. To change the display (starting at the default of month - date): 1. Press the “mode/+” button and the display will now show seconds. 2. Press the “mode/+” button...

  • Page 13

    13 troubleshooting problem: the projection is faint solution: 1) change intensity setting 2) use ac adapter 3) darken surroundings 4) use fresh batteries (if ac is not used) problem: the lcd is faint. Solution: 1) replace the batteries. Problem: no reception of wwvb signal. Solution: 1) it may help ...

  • Page 14

    14 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to th...

  • Page 15

    15 for warranty work, technical support, or information contact: la crosse technology 2809 losey blvd. S. La crosse, wi 54601 phone: 608.782.1610 fax: 608.796.1020 e-mail: support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) web: www.Lacrossetec...