La Crosse Technology WT-8112U Instruction Manual - page 10
25
If the solar mode setting is OFF:
•
LCD will remain ON constantly.
EXIT THE MANUAL SETTING MODES
•
To return to the normal display mode from anywhere in
manual setting mode simply press the SNZ key anytime.
•
If no keys are pressed for at least 15 seconds in setting
mode, the radio-controlled solar clock will automatically
switch back to normal display mode.
ALARM
To enter into the alarm setting mode:
1.
Hold the ALM key for 4 seconds. The hour digits start
flashing.
2.
Press and release the + key to set the hour.
3.
Press and release the ALM key to set the minutes. The
minute digits start flashing.
4.
Press and release the + key to set the minutes. If the +
key is held, the unit will increase by 5
5.
Press and release again the ALM key to exit the Alarm
setting mode or wait for 15 seconds automatic timeout.
TO DEACTIVATE THE ALARM:
The alarm will be automatically ON when the alarm time is set.
To deactivate the alarm (OFF), press and release once the
Alarm icon (((
•
))) (ON)