La Crosse TX70U-IT Quick Start Manual - page 2
Sensor Preparation
•
Insert (optional)
probe in socket)
•
Insert 2 AAA
batteries, see
polarity inside
case
Download La Crosse Mobile App
•
iOS App Store, search La Crosse Alerts Mobile
•
Android Play Store, search La Crosse Alerts Mobile
Follow directions on the mobile device screen to register;
for assistance, review help within the application.
Factory Reset
(try before support request on unregistered pieces)
Gateway – remove a/c, hold gray button, reinsert a/c, release
button after see:
red light on – red light off – red light on
; try
registration when red light shows 4 blinks
Sensor – press and hold gray button until segments fill with
18.88; try registration when counting begins
Diagnose Gateway Lights
1 blink – LAN cable missing; cable or port bad
2 blinks – no internet protocol (IP) address from router
3 blinks – no DNS resolve; aka can’t find server
4 blinks – ready to register
Both Blink – existing registration not deleted
No Lights – check a/c power or factory reset
Solid Red – registered gateway
Contact Support
Submit a request for email response at
http://www.lacrossetechnology.com/support/alerts/
Resources
•
Product Info:
http://www.lacrossealertsmobile.com
•
Online help:
http://support.lacrossealertsmobile.com
•
Email Support:
http://www.lacrossetechnology.com/support/alerts/
•
Phone: 608-785-7920
Notes (e.g. record gateway ID, user account name):
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Specifications
Sensor RF Range
200 feet (60.96m) open space
Temperature
-40
o
F to 140
o
F with 0.2
o
resolution
Probe (optional)
-40
o
F to 140
o
F with 0.2
o
resolution
Water
H20 or Dry
Size
5.23” H x 0.76” W x 1.44” D
Care and Maintenance
•
Do not mix old and new batteries
•
Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
•
Always purchase the correct size and grade of battery most suitable
for intended use.
•
Replace all batteries of a set at the same time.
•
Clean the battery contacts and also those of the device prior to
battery installation.
•
Ensure the batteries are installed with correct polarity (+and -).
•
Remove batteries from equipment which is not to be used for an
extended period of time.
•
Remove expired batteries promptly.
TX70U-IT
http://
www.support.lacrossealertsmobile.com
TX70U-IT
http://www.support.lacrossealertsmobile.com