La Crosse WS-3650 Operation Manual - page 21
48
13.3
Alarm
Upon touching the ALARM display in the WIND section will –
numbered and sorted according to the time of appearance – with
٭
NEXT
٭
all those set and activated alarms (outside the wake-up
alarm) be displayed that have reached an alarm condition since
their last deletion.
Here for every respective alarm the time and date of appearance
can be displayed by touching
٭
ALARM
٭
.
14
PC Connection
As an important feature exceeding the mere display on the
Touch Screen the Weather Station allows the read-out of all
measured and displayed time and weather data in form of
complete history data sets on a PC.
14.1
Data Storage
For a comprehensive weather history the Base Station allows the
internal storage of up to 1750 complete sets of weather data with
time and date. These data sets are being stored in non-volatile
ring buffer memory (EEPROM) and will not be lost even in case
of an interruption of power supply (e. g. change of batteries).
In case the memory capacity of the Weather Station is
exhausted the oldest data sets stored will be overwritten by the
new ones entered.
14.2
Data Recall
The weather data stored can only be read out, processed and
displayed by means of a PC. Also the settings of the storing
intervals from 1 minute to 24 hours for the storage of data sets
can only be performed by means of a PC.
14.3
Connections and Software
The wiring between Weather Station and PC takes place by
means of an included COM port cable. Furthermore the “Heavy
Weather Pro 3650“ software package also included in the
shipping contents must be installed on the PC.
This software allows the display of all present weather data with
graphic symbols. It further allows the display, storage and
printing of history data sets, whose volume exceeding the