1. DL manuals
  2. La Crosse
  3. Weather Station
  4. WS-6010U-IT
  5. Instruction Manual

La Crosse WS-6010U-IT Instruction Manual

Manual is about: Solar Powered Wireless Humidity/Temperature Station (Weather Station)

Summary of WS-6010U-IT

  • Page 1

    1 wall mount location solar panel battery compartment with battery switch inside model ws-6010u-it solar powered wireless humidity/temperature station (weather station) instruction manual model tx62uth-it/solar-powered transmitter (sensor): lcd toggles temperature and humidity readings transmits out...

  • Page 2

    2 battery compartment initial setup (using included solar rechargeable batteries from the factory) 1. Open battery compartment on the back of the weather station and make sure that the battery switch under the battery compartment is to the left. If it is not, please slide the switch to the left befo...

  • Page 3

    3 solar-powered transmitter operation modes (1) normal mode: normal mode occurs when the battery voltage is 2.5v or greater. It measures and transmits temperature / humidity (weather) data to the indoor receiver every 8 seconds. It checks the brightness level of the surrounding environment every 5 s...

  • Page 4

    4 program menu: set the time: press and hold the set button for 3 seconds to enter the time setting mode. Hour: the hour digits will flash. Press and release the plus button to set the hour. Press and release the set button once. Minutes: the minute digits will flash. Press and release the plus butt...

  • Page 5

    5 display modes: press and release the set button to view different display modes: outdoor temperature in the first line on the left side and outdoor humidity in the second line on the left side. Shows indoor temperature in the first line on the right side and indoor humidity in the second line on t...

  • Page 6

    6 positioning the weather station: stand the weather station on a table top, counter or desk, or mount is on a wall. Ensure that the weather station continuously receives the 915mhz signal from the sensor before mounting it in the desired location. Caution: if the weather station is placed in a cons...

  • Page 7

    7 if new solar rechargeable batteries are used, the battery switch should be moved to the right solar position after they are inserted in the unit. Replace included solar rechargeable batteries with standard alkaline batteries 1. Remove the included solar rechargeable batteries from the compartment....

  • Page 8

    8 display next: install batteries into the display according to the diagram in the battery compartment. After powering up the solar clock, all lcd segments will light up briefly and it will show the time (12:00), indoor temperature, date, and indoor humidity battery mode: leave switch on battery mod...

  • Page 9

    9 misrepresentation by the seller or performance variations resulting from installation-related circumstances. La crosse technology, ltd will not assume liability for incidental, consequential, punitive, or other similar damages associated with the operation or malfunction of this product. This prod...