1. DL manuals
  2. La Crosse
  3. Weather Station
  4. WS-7042TWC
  5. Instruction Manual

La Crosse WS-7042TWC Instruction Manual

Manual is about: Wireless 433 MHz Weather Station with Forecast

Summary of WS-7042TWC

  • Page 1

    Ws-7042twc wireless 433 mhz weather station with forecast instruction manual.

  • Page 2: Table of Contents

    2 table of contents topic page inventory of contents/additional equipment 3 quick set-up guide 4 detailed set-up guide battery installation 5 program mode function keys 6 time setting 6 features weather forecast 7-8 indoor temperature and humidity 9 outdoor temperatures 9 minimum & maximum records (...

  • Page 3: Inventory of Contents

    3 inventory of contents 1. The indoor weather station (figure 1). 2. One tx6u remote temperature sensor with mounting bracket (figure 2). 3. Three each, ½” philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. Additional equipment (not included) 1. Two, fr...

  • Page 4: Etailed Set-Up Guide

    4 (all remote temperature sensors must be started before the indoor weather station) 4. Do not press any buttons for 10 minutes. In this time the indoor weather station and remote temperature sensor will start to talk to each other and the indoor weather station will show both the indoor temperature...

  • Page 5: B.  Indoor Weather Station

    5 3. Observing the correct polarity install 2 aa batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free). 4. Replace the battery cover by sliding upwards. Be sure battery cover is on securely. B. Indoor weather station 1. Remove the battery cover. To ...

  • Page 6: B.  Time Setting

    6 and “ch”. The two buttons on the back are labeled “set” and “+”. B. Time setting 1. Press and hold the “set” button for 3 seconds 2. The hour digit will flash. 3. Press and release the “+” button to change the hour. Press the “+” button once and the hour will increase by one, twice and the hour wi...

  • Page 7: I.  Weather Forecast

    7 i. Weather forecast the weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of air pressure over time. The ws-7042twc averages past air-pressure readings to provide an accurate forecast—creating a necessity to disregard all weather fore...

  • Page 8: III.  Outdoor Temperature

    8 4. These arrows reflect current changes in the air pressure. 5. An arrow pointing up indicates that the air pressure is increasing and the weather is expected to improve or remain good. 6. An arrow pointing down indicates that the air pressure is decreasing and the weather is expected to become wo...

  • Page 9: Records

    9 7. Press and release the “min/max/reset” button. 8. The current indoor and outdoor temperatures will be displayed in their respective areas. B. Resetting the minimum and maximum temperature records press and hold the “min/max/reset” button for 5 seconds to reset the minimum and maximum recorded te...

  • Page 10: Mounting

    10 5. Install batteries into the indoor weather station. 6. Follow the detailed set-up guide for programming and operating instructions. B. Viewing and operating multiple remote sensors to view the temperature of a different remote sensor unit, press and release the “ch” button. An arrow over one of...

  • Page 11: A.  Mounting With Screws

    11 a north-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station and changes in elevation will result with inaccurate weather f...

  • Page 12: A.  Using The Table Stand

    12 3) remove the protective strip from the other side of the tape. Position the remote temperature sensor in the desired location, ensuring that the indoor temperature station can receive the signal. Ii. The indoor temperature station the indoor temperature station can be mounted in two ways: • with...

  • Page 13: Solution:

    13 2. Place remote temperature sensor closer to the indoor temperature station. 3. Be sure all batteries are fresh. 4. Place remote temperature sensor and indoor temperature station in position so the straight-line signal is not passing through more than two or three walls. Problem: temperatures do ...

  • Page 14: Specifications

    14 specifications temperature measuring range: indoor 32 °f to 139.8°f with 0.2°f resolution (0 °c to 59.9°c with 0.1 °c resolution) “ofl” displayed if outside this range outdoor -21.8 °f to 157.2°f with 0.2°f resolution (-29.9 °c to 69.9°c resolution) “ofl” displayed if outside this range indoor re...

  • Page 15: Warranty Information

    15 warranty information la crosse technology provides a 1-year warranty on this indoor weather station. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the indoor weather station in for repairs, contact la crosse technology. The indoor ...

  • Page 16

    16 fcc id: omo-01rx (receiver), omo-01tx (transmitter) this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept interference received, including interference that may ca...