1. DL manuals
  2. La Crosse
  3. Weather Station
  4. WS-7212NU
  5. Instruction manual

La Crosse WS-7212NU Instruction manual

Manual is about: Wireless 433 MHz Weather Station

Summary of WS-7212NU

  • Page 1

    Ws-7212nu wireless 433 mhz weather station instruction manual.

  • Page 2

    2 table of contents topic page inventory of contents 3 additional equipment 4 quick setup guide 5-9 function keys 5 detailed set-up guide 10-15 battery installation 10-12 setting the time 12-13 setting °c or °f 13 setting 12/24 time 13 features 14-18 minimum and maximum temperatures 14 resetting min...

  • Page 3

    3 inventory of contents 1. One indoor weather station (figure 1) 2. The remote temperature/humidity sensor (tx4u) and mounting bracket. (figure 2) 3. Mounting hardware. 4. Instruction manual and warranty card. Figure 1 figure 2.

  • Page 4

    4 additional equipment (not included) 1. 1 philips screwdriver. 2. 2 fresh aa 1.5v batteries. (for indoor weather station) 3. 2 fresh aa 1.5v batteries. (for temperature/humidity sensor).

  • Page 5

    5 quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. Function keys 1. “ set ”: allows you to set the time, select °c or °f, and select 12 or 24 time display. 2. “ min/max ”: allows you to view the minimum and maximum temperatures recorded. 3. “ + ”: in the...

  • Page 6

    6 multiple remote sensor units ” section in the detailed set- up guide . 1. Have the indoor weather station and remote temperature/humidity sensor 3 to 5 feet apart. 2. Batteries should be out of all units for 15 minutes. 3. Place the batteries into the remote temperature/humidity sensor first, then...

  • Page 7

    7 temperature and humidity. If the indoor weather station does not display both the indoor temperature and the outdoor temperature and humidity after the 15 minutes please re-try the set-up as shown on page 5. After both indoor temperature and outdoor temperature and humidity are displayed for 15 mi...

  • Page 8

    8 reduce the distance of the range. An outdoor wall or window can have up to 30 feet of resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance should not exceed 330 feet in a straight line. To complete the set up of your indoor weather station after the 1...

  • Page 9

    9 release the “set” button once. 3. The hour will now be flashing. Press and release the “+” button until the correct hour is displayed. Press and release the set button once more, and you are done..

  • Page 10

    10 battery compartment detailed set-up guide i. Battery installation a. Remote temperature/humidity sensor 1. Remove the mounting bracket. 2. Remove battery cover 3. Observing the correct polarity, install 2 aa batteries—make sure they do not spring free, or start-up problems may occur. 4. Replace c...

  • Page 11

    11 b. Indoor weather station note: after the batteries are installed, do not press any buttons for 15 minutes. This may interfere with the signal, causing temperatures to register incorrectly. 1. Remove the battery cover on the backside. To do this, push up and pull out. 2. Observing the correct pol...

  • Page 12

    12 5. The indoor weather station should now show: “-:- -” in the time lcd, indoor temperature in the indoor lcd and outdoor temperature and humidity in the outdoor lcd. Ii. Setting the time 1. Press and hold the “ set” button for 5 seconds. 2. The minutes will begin to flash. 3. Press and release th...

  • Page 13

    13 midnight. During the am hours this area will be blank. Iii. °c or °f temperature setting 1. Press and release the “ + ” button to change from °f (fahrenheit-default) to °c (celsius). 2. Press and the release the “ set ” button to move to the 12/24 hour time setting . Iv. 12/24 hour time setting 1...

  • Page 14

    14 features a. Minimum and maximum temperatures press and release the “ min/max” button to toggle to the minimum temperatures, “min” appears at the bottom of the display and the recorded minimum temperatures are displayed. 1. Press and release the “ min/max” button, “max” appears at the bottom of th...

  • Page 15

    15 c. Adding additional remote temperature /humidity sensors (optional) the ws-7212u is able to receive signals from 3 different remote temperature, temperature/humidity sensors. The following are some brief instructions for the basic set-up of remote sensor units with the ws- 7212u. These extra sen...

  • Page 16

    16 note: when setting up multiple units it is important to remove the batteries from all existing units in operation, then to insert batteries first into all the remote temperature/humidity sensor units, and in numeric sequence. Second, install batteries into the indoor weather station. Transmission...

  • Page 17

    17 remote sensors. 5. Install batteries into the indoor weather stations. 6. Follow the detailed set-up guide for programming and operating instructions. Viewing and operating with multiple remote sensor units 7. To view the temperature of a different remote sensor unit, press and release the “ch” b...

  • Page 18

    18 “boxed” number). Pressing and releasing the “min/max” button will toggle through the minimum and maximum indoor temperature, and the minimum and maximum outdoor temperature. 9. To reset the minimum/maximum readings, press and hold the “min/max” button for 5 seconds. Mounting note: to achieve a tr...

  • Page 19

    19 a. Remote temperature/ humidity sensor 1. Remove the mounting bracket from the remote temperature/humidity sensor 2. Mount using either screws or adhesive tape. 3. Re-attach the remote temp/humidity sensor to the mounting bracket. B. The weather station 1. The indoor weather station comes with th...

  • Page 20

    20 c. Place the indoor weather station onto the screw using the hanging hole on the backside. D. Gently pull the indoor weather station down to lock the indoor weather station into place. Troubleshooting note: for problems not solved, please contact la crosse technology via e-mail or phone, or visit...

  • Page 21

    21 ten minutes and then check for a temperature and humidity. 2) if this does not work please remove the batteries from both units and restart the system (please see detailed set-up on page nine through eleven). Note: please make sure when restarting the system that all batteries are fresh. 3) once ...

  • Page 22

    22 4) if after 15 minutes the temperature and humidity are not displayed you will need to choose another location for placement of the temperature/humidity sensor. 5) the best way of doing this is to move the sensor 10 feet closer to the indoor weather station. 6) after moving the remote temperature...

  • Page 23

    23 working environments. The indoor sensor is less responsive to ambient air currents because of the shielding effect of the indoor weather station’s case. In addition, the casing can act as a heat sink to absorb and store heat from external sources (i.E. Handling of the case or radiant heat). In ad...

  • Page 24

    24 maintenance and care instructions • extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • do not submerge in water. • do not...

  • Page 25

    25 specifications transmitting frequency 433mhz measuring range - temperature indoor weather station: indoor 32 ° f to 138.2 ° f with 0.2 ° f resolution. Indoor weather station: outdoor -21.8 ° f to 157.8 ° f with 0.2 ° f resolution. Temp accuracy +/- 1 ° f measuring range - humidity indoor weather ...

  • Page 26

    26 batteries—(alkaline recommended) remote temperature /humidity sensor 2 x aa, 1.5v indoor weather station 2 x aa, 1.5v dimensions: (h x w x d) indoor weather station 7.5” x 3” x 1.08” (excluding table stand) (190 x 75 x 27.5 mm) remote temperature /humidity sensor 4.33” x 1.57” x 0.78” (110 x 40 x...

  • Page 27

    27 warranty information la crosse technology provides a 1-year warranty on this weather station. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the weather station in for repairs, contact la crosse technology. The weather station will ...

  • Page 28

    28 toy. Keep out of children’s reach. This warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work...

  • Page 29

    29 fcc disclaimer this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Freq. ...