La Crosse WS-7394U Instruction Manual

Manual is about: Wireless 433 MHz Wireless Weather Station

Summary of WS-7394U

  • Page 1

    Ws-7394u wireless 433 mhz wireless weather station instruction manual.

  • Page 2

    2 table of contents topic page inventory of contents/ additional equipment 3 about wwvb 3 quick set up guide 4 detailed set up guide battery installation 5 start up sequence 6 explanation of lcd information 7 function key layout 8 program mode overview of programming sequence 8 lcd contrast setting ...

  • Page 3

    3 inventory of contents 1. Ws-7394u—indoor weather station 2. Tx6u—remote temperature sensor 3. Instruction manual and warranty card additional equipment (not included) 1. Five fresh aa 1.5v alkaline batteries. 2. One wall-mounting screw (optional) about wwvb (radio-controlled time) the nist (nation...

  • Page 4

    4 quick set-up guide hint: use good quality alkaline batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 15 minutes. 3. Place the batteries into the remote temperature sensor first the...

  • Page 5

    5 detailed set-up guide i. Battery installation batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring free. Also be sure to insert alkaline batteries into the remote temperature sensor first, then the indoor weather station. Initial set up should be done ...

  • Page 6

    6 ii. Start up sequence a. Initial start 1. Immediately after the batteries have been installed the lcd will completely light up for a brief moment. 2. All information will then appear in normal mode, with “12:00” as the default time and “we.1” as the default date (2004 as the year). 3. The indoor t...

  • Page 7

    7 iii. Explanation of lcd information a. The below picture highlights the lcd features. B. There are many different modes the indoor weather station can be set to. The lcd shown is the normal operating mode, and your actual data shown will be different based on your local settings and conditions. Ra...

  • Page 8

    8 iv. Function key layout a. The below picture shows the four function keys used in programming and operation of your indoor weather station v. Program mode the program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to pr...

  • Page 9

    9 c. Time zone setting 1. Press and hold the “set” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “set” button once more to advance to the time zone setting. 4. A number will flash to the left of the letter “h” at ...

  • Page 10

    10 6. Press and release the “set” button to confirm the radio- controlled time on/off setting and continue to the 12/24-hour time mode setting. F. 12/24-hour time mode 1. Press and hold the “set” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to ...

  • Page 11

    11 4. The minutes will begin to flash at the top of the display. 5. Press and release the “out/+” button to select the desired minutes. 6. Press and release the “set” button to confirm the minutes and continue to the year setting. I. Setting the year manually 1. Press and hold the “set” button for f...

  • Page 12

    12 l. Temperature measuring units selection (°f or °c) 1. Press and hold the “set” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “set” button ten more times to advance to the temperature measuring units setting. 4...

  • Page 13

    13 o. Forecast sensitivity setting 1. Press and hold the “set” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “set” button thirteen more times to advance to the forecast sensitivity setting. 4. The two air pressure...

  • Page 14

    14 features and operations a. Minimum and maximum temperature and humidity 1. Indoor minimum and maximum temperature and humidity the indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a n...

  • Page 15

    15 next press and hold the “set” key for at least three seconds. You will see then that the values will reset to the current temperature and corresponding time. B. Multiple remote temperature sensors the ws-7394u is able to receive signals from 3 different remote sensors. These extra remote sensors ...

  • Page 16

    16 each remote sensor will have its own minimum and maximum values stored. C. Comfort indicator for indoor temperature and humidity 1. The comfort level indicator appears inbetween the indoor tempearture and humidity. 2. The indicator will display a “happy-face” when the temperature is between 68 °f...

  • Page 17

    17 e. If the symbols do not change, the weather has not changed (or the change has been slow and gradual). F. The sensitivity of the change in foreacst icon is set by the user in section f of the detailed set up guide. E. Weather tendency arrows 1. Along with the forecast icon there is a pressure te...

  • Page 18

    18 5. The “0h” on the horizontal axis indicates the current hour, thus the current air pressure also. 6. Each bar on the bar graph represents a value of 0.03 hpa, and each bar also has a corresponding value on the verticle axis. 7. Air pressure trends can be determined by simply glancing at the bar ...

  • Page 19

    19 vii. Mounting note: before permanently mounting, ensure that the indoor weather station is able to receive signals from the sensors and wwvb signal at the desired location. To achieve a true temperature reading, avoid mounting the remote temperature sensor (or any sensor) where direct sunlight ca...

  • Page 20

    20 b. Mounting the ws-7394u indoor weather station the indoor weather station can be mounted in two ways: • with the table stand • on the wall with the use of a wall hanging screw (not included) 1. Using the table stand the indoor weather station comes with the table stand already mounted. If you wi...

  • Page 21

    21 troubleshooting problem: the lcd is faint. Solution: 1) set the lcd contrast to a higher level. 2) replace batteries. Problem: no outdoor temperature is displayed. Solution: 1) remove all batteries, reinsert into the remote temperature sensor first, then into the indoor weather station. 2) place ...

  • Page 22

    22 specifications indoor weather station recommended operating temperature 32 °f to 122°f (0°c to 50°c) lcd contrast 8 levels (0-7) temperature measuring range indoor 14.2 °f to 139.8°f with 0.2°f resolution (-9.9 °c to 59.9°c with 0.1°c resolution) (“ofl” displayed if outside this range) outdoor -2...

  • Page 23

    23 warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to th...

  • Page 24

    24 e-mail: support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) web: www.Lacrossetechnology.Com fcc disclaimer this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not caus...