DL manuals
La Crosse
Clock
WS-8017U
Instruction Manual

La Crosse WS-8017U Instruction Manual

Manual is about: ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

Page of 9

Download

Print this page

Bookmark us

Holder

Hanging holes

Battery cover

LCD1

display

LCD2

display

Foldable stand

WS-8017U

ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art Atomic Clock as an example of superior design

and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor

temperature display, this innovative clock is ideal for home or office use. Operation of this product is

simple and straightforward. By reading this operating manual, the user will however receive a better

understanding of the Atomic Clock together with the optimum benefit of all its features.

FEATURES:

ATOMIC CLOCK:

• WWVB Radio controlled time with manual time setting

• 12/24 hour time display

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (3 languages to choose from: English, French and Spanish)

• Time zone setting

• Daylight savings time ON/OFF option (DST)

• ºC or ºF temperature display selectable

• Indoor temperature display

• Outdoor temperature display via 433MHz transmission

• Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

• Remote transmission of outdoor temperature to the Atomic clock by 433 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The Atomic Clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the

steps below:

Insert finger or other solid object in the space at the bottom center of the battery compartment

and lift up to remove the cover.

Insert batteries observing the correct polarity (see marking).

Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the

steps below:

Remove the cover.

Insert the batteries, observing the correct polarity (see marking).

Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.

SETTING UP:

Function keys

1 2 3 4 5 6 7 Next › »

Summary of WS-8017U

Page 1
Holder hanging holes battery cover lcd1 display lcd2 display foldable stand foldable stand ws-8017u atomic clock with outdoor wireless temperature instruction manual introduction: congratulations on purchasing this state-of-the-art atomic clock as an example of superior design and engineering. Provi...
Page 2
Indoor temperature or seconds display weekday or seconds display alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. Do not set the clock until the outdoor temperature is displayed. 1. Place batteries in the outdoor transmitter first, then into the atomic clo...
Page 3
• date setting • weekday setting • 12/24 hour time display setting • ºc or ºf setting time zone setting after entering the manual setting mode as described above, the time zone can be set between the –1 to –12 hour or greenwich mean time (gmt) range in lcd2. To do this: or 1. The time zone (lcd2) wi...
Page 4
2. Press and release the set key to switch to the “month setting”. Month setting 1. The month digits on lcd2 will start flashing. Set the desired month by use of the + key. 2. Press and release the set key to move to the mode “date setting”. Date setting 1. The digits for the date will start flashin...
Page 5
3. Using other electrical products such as headphones or speakers operating on the same signal frequency (433mhz) may prevent correct signal transmission and reception. 4. Neighbors using electrical devices operating on the 433mhz signal frequency can also cause interference. Note: when the 433 mhz ...
Page 6
• use of the foldout table stands, or • wall mounting foldout table stand the foldout table stand legs are located on the backside, at the lower corners, and on both sides of the battery cover. The hinges are towards the edges of the atomic clock, and the ends (with no hinge) need to be folded out t...
Page 7
2) move the atomic clock closer to the transmitter or place the transmitter closer to the atomic clock. Make sure the clock is at a receivable range from the transmitter. 3) move the units to another location. Interferences from other electrical devices operating on the same signal frequency (433mhz...
Page 8
Warranty information la crosse technology provides a 1-year warranty on this atomic clock. Contact la crosse technology immediately upon discovery of any defects covered by this warranty. Before sending the atomic clock in for repairs, contact la crosse technology. The atomic clock will be repaired ...
Page 9
Fcc id: omo-01rx (receiver) omo-01tx (transmitter) this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept interference received, including interference that may cause ...