La Crosse WS-8120 Quick Setup Manual

Manual is about: Solar Powered Wireless Humidity/Temperature Station

Summary of WS-8120

  • Page 1

    1 model ws-8120 solar powered wireless humidity/temperature station (weather station) quick setup guide features: receives wireless outdoor temperature solar cell powers the included 2 "aa" rechargeable alkaline batteries works with regular alkaline batteries with a flip of a switch stores solar pow...

  • Page 2: Warning

    2 battery compartment initial setup (using included solar rechargeable batteries from the factory) 1. Step #1: open battery compartment on the back of the weather station and make sure that the battery switch under the battery compartment is positioned to the left. If it is not, please slide the swi...

  • Page 3

    3 transmits outdoor temperature to indoor receiver using 915 mhz signals 200 ft. Wireless transmission range (open air). Built-in rechargeable alkaline power cells store solar power for continuous operation. No batteries necessary (internal power cells cannot be replaced; contact customer service fo...

  • Page 4

    4 (2) idle mode: if the battery voltage drops below 2.4v, it commences idle mode; the lcd turns off and it does not measure / transmit weather data. It checks the brightness level of the surrounding environment every 5 seconds. If battery voltage rises back to 2.5v or above, it returns to normal mod...

  • Page 5

    5 lcd will automatically turn on if the environment is bright enough. No information will be displayed when the lcd is off, but all the settings and operations will remain, except for the temperature and humidity measurements. Enter the program menu and turn sol to off to disable this power save fea...

  • Page 6

    6 the maximum transmission range is 200 feet (60.96 m) from the outdoor transmitter to the solar station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be re...

  • Page 7

    7 setup after initial start-up / replacing the batteries 1. After powering up the weather station, all lcd segments will light up briefly and it will show the time (12:00), indoor temperature, date, and indoor humidity. 2. After the batteries are inserted, the weather station will start receiving da...

  • Page 8

    8 positioning the solar transmitter (sensor): it is important to place the sensor in a bright environment for the solar panel to collect enough light to recharge the internal power cell. It is best mounted on an east wall to receive cool morning sun to charge. Under an overhang will provide protecti...

  • Page 9

    9 service procedures. Warranty service can only be performed by a la crosse technology, ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to la crosse technology, ltd or la crosse technology, ltd’s authorized service center. La crosse ...

  • Page 10

    10 for warranty work, technical support, or information contact: la crosse technology 2817 losey blvd. S. La crosse, wi 54601 the complete instruction manual is available at: www.Lacrossetechnology.Com/support le manuel d'instruction complet est disponible sur: www.Lacrossetechnology.Com/support el ...