La Crosse WS-8147U-IT Instruction Manual - page 2
WS-8117U-IT www.lacrossetechnology.com/support Page | 2
Get Started
Step 1: Insert 2 fresh AA, batteries into the TX37U-IT sensor. Observe
correct polarity.
Step 2: Insert 2 fresh AA, batteries into the atomic clock Observe
correct polarity.
Step 3: After 5 minutes place sensor outside in a shaded location.
Restart: If the outdoor temperature shows dashes, remove
batteries from the station & outdoor sensor. Press any button on
the station 20 times. After 15 minutes, return to Step 1.
Set Time, Date, 12/24 Hour, and Temperature Units
1. Press the SET button to enter time set mode, confirm
adjustments and move to next item.
2. Press the + button to adjust values.
Settings order:
1. Time Zone
2. Daylight Saving Indicator
3. Hour
4. Minutes
5. Year (2 digit)
6. Month
7. Date
8. Weekday
9. 12/24 Hour Format
10. Fahrenheit/Celsius
Press SET to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
Set Alarm Time
1. Hold ALM to enter ALM set mode.
2. Press + to adjust values.
3. Press ALM to confirm adjustments and move to next
item.
Setting order: 1. Hour, 2. Minutes
Press ALM to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
This clock has time zones
from GMT 0 to +/-12h
North American time zones
-4
ATL
Atlantic
-5
EST
Eastern (default)
-6
CST
Central
-7
MST
Mountain
-8
PST
Pacific
-9
ALA
Alaska
-10
HAW
Hawaiian
SET
+
ALARM
+