1 ws-9023u 915 mhz wireless weather station instruction manual.
2 table of contents introduction……………………………………………………………………………………..3 inventory of contents…………………………………………………………………………4 quick set up……………………………………………………………………………………4 detailed set up………………………………………………………………………………4-5 battery installation…………..………………………………………………………..4-5 12 or 24 hour time display………..……...
3 12 or 24 hour time display indoor temperature (°f or °c) connection w/ sensor icon set/channel button outdoor temperature (°f or °c) outdoor humidity (%rh) minimum/maximum temperature & humidity minimum/maximum & plus button figure 1 low battery indicator instant transmission is the state-of- the-...
4 inventory of contents 1. Wireless weather station (figure 1) 2. Wireless thermo-hygro sensor (tx21u) and mounting bracket. (figure 2) 3. 3 each, 1/2” philips screws. 4. One strip of double sided adhesive tape. 5. Instruction manual and warranty card. Additional equipment (not included) 1. 1 philip...
5 indoor temperature and the time as 12:00 will be displayed. If they are not shown in lcd after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to the next step. 3. After the batteries are inserted, the we...
6 * when the signal is successfully received by the weather station, the icon will be switched on. (if not successful, the icon will not be shown in lcd) so the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the ico...
7 1. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. 2. Insert the batteries to the first thermo-hygro sensor. 3. Within 2 minutes of powering up the first sensor, insert the batteries to ...
8 iii. Mounting note: to achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the thermo-hygro sensor on an outside north-facing wall (under the eve of a house is ideal). The sending range is 330 feet; obstacles such as walls, stucco walls, concrete, and...
9 7) during the course of the 15 minutes an outdoor temperature should appear on the display. You can now put your sensor(s) back outside. Maintenance and care instructions • extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • clean displays and units with ...
10 battery life up to 24 months warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in...
11 la crosse technology, ltd will not assume liability for incidental, consequential, punitive, or other similar damages associated with the operation or malfunction of this product. This product is not to be used for medical purposes or for public information. This product is not a toy. Keep out of...
