Ws-9029u 915 mhz wireless weather station instruction manual.
2 contents 03 introduction 03 features 04 quick set up guide 05 detailed set up guide 06 function keys 06 operations 08 mounting 09 troubleshooting 10 maintenance and care 10 specifications 10 warranty information.
3 features • wireless weather station (figure 1). • remote temperature sensor with optional channel 2 probe (tx25u, figure 2). • indoor temperature (°f or °c) and indoor humidity. • wireless outdoor temperature (°f or °c). • optional channel 2 temperature probe. • able to receive up to 3 remote temp...
4 • wall hanging or free standing. Additional equipment (not included) 1. Two fresh aa 1.5v alkaline batteries for the wireless weather station. 2. Two fresh aaa 1.5v alkaline batteries for the remote temperature sensor. 3. One, philips screwdriver for mounting. Quick setup hint: use good quality al...
5 detailed setup guide i. Battery installation (when one temperature sensor is being used) 1. First, insert the batteries to the temperature sensor (see “a. Temperature sensor” below). 2. Within 2 minutes of powering up the sensor, insert the batteries to the weather station (see “b. Wireless weathe...
6 * when the signal is successfully received by the weather station, the icon will be switched on. (if not successful, the icon will not be shown in lcd) so the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the ico...
7 to view minimum and maximum temperatures: press the min/max/+ button once. “min” appears in the bottom left of the lcd. The indoor and outdoor temperatures displayed when “min” appears are the minimum recorded values. The minimum records will display for 30 seconds before returning to the normal d...
8 note: you must insert the batteries into the second sensor within 30 seconds of reception of the first sensor. 7. The outdoor temperature from the second sensor and the "channel 3" icon should then be displayed on the weather station. If this does not happen after 2 minute, the batteries will need...
9 the wireless weather station the wireless weather station can be mounted in 2 ways: • with the table stand or, • on the wall with the use of a wall hanging screw (not included). A. Using the table stand the wireless weather station comes with the table stand attached. If you wish to use the table-...
10 maintenance and care instructions 9 extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. 9 clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. 9 do not submerge in water. 9 immedi...
11 surface; (4) damage resulting from failure to follow instructions contained in y our owner’s manual; (5) damage resulting from t he performance of repairs or alterations by someone other than an authoriz ed la crosse t echnology, ltd authorized service center; (6) units used for other than home u...
