- DL manuals
- La Crosse
- Weather Station
- WS-9121U-IT
- Instruction Manual
La Crosse WS-9121U-IT Instruction Manual
Summary of WS-9121U-IT
Page 1
38 contents language page ________________________________________________ english 1 french 35 spanish 71.
Page 2: Instruction Manual
39 wireless 915 mhz temperature station instruction manual introduction congratulations on purchasing this compact 915mhz temperature station which displays time, indoor temperature and outdoor temperature readings. With two easy to use keys, this product is ideal for use in the home or office..
Page 3: Developed By La Crosse
40 instant transmission is the state- of-the-art new wireless transmission technology, exclusively designed and developed by la crosse technology. Instant transmission offers you an immediate update (every 16 seconds!) of all your outdoor data measured from the transmitters: follow your climatic var...
Page 4: Features
41 features removable stand lcd display function keys hanging hole battery compartment cover.
Page 5: The Temperature Station
42 the temperature station • quartz clock with 12 or 24-hour time display (hour and minute, manually set) • indoor and outdoor temperature reading in fahrenheit (°f) or celsius (°c) • can receive up to three outdoor transmitters • wireless transmission at 915 mhz • signal reception intervals at 16 s...
Page 6: Setting Up:
43 the outdoor temperature transmitter • remote transmission of outdoor temperature to temperature station by 915 mhz transmission • water resistant casing • wall mounting and table-standing setting up: when one transmitter is used 1. First, insert the batteries to the transmitter (see “how to insta...
Page 7
44 batteries to the temperature station (see “how to install and replace batteries in the temperature station”below). Once the batteries are in place, all segments of the lcd will light up briefly. Following the indoor temperature and the time as 0:00 will be displayed. If they are not shown in lcd ...
Page 8
45 station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. 4. In order to ensure sufficient 915 mhz transmission however, there should be a distance of no more than 330 feet between the final position of the temperature station a...
Page 9
46 2. Insert the batteries to the first transmitter. 3. Within 2 minutes of powering up the first transmitter, insert the batteries to the temperature station. Once the batteries are in place, all segments of the lcd will light up briefly. Following the indoor temperature and the time as 0:00 will b...
Page 10
47 and reset from step 1. 5. Insert the batteries to the second transmitter as soon as the outdoor temperature readings from the first transmitter are displayed on the temperature station. Note: user shall insert the batteries into the second transmitter within 45 seconds of reception of the first t...
Page 11
48 7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the temperature station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third tra...
Page 12: Reception”).
49 meters between the final position of the temperature station and the transmitter (see notes on “positioning” and “915 mhz reception”). Important: • transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission problems occur, it is ...
Page 13: Temperature Station
50 the reception is tried for 14 seconds on 910mhz. This will also be done for re-synchronization. How to install and replace batteries in the temperature station the temperature station uses 2 x aaa, alkaline batteries. When batteries will need to be replaced, the low battery icon will appear on th...
Page 14: Temperature Transmitter
51 how to install and replace batteries in the temperature transmitter the temperature transmitter uses 1 x iec cr2032, 3.0v battery. When battery needs to be replaced, the low battery icon will appear on the lcd of the temperature station- or replace battery every 12 months. To install and replace ...
Page 15: Note:
52 3. Replace the battery cover on the unit. Note: in the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the ...
Page 16: Depot.
53 please participate in the preservation of the environment. Return used batteries to an authorized depot..
Page 17: Function Keys
54 function keys temperature station: the temperature station has two easy to use function keys. Min/ max/ + key set/ ch key.
Page 18
55 set/ch key (setting/channel) • press and hold for about 3 seconds to enter the manual setting mode. • press shortly to toggle between different channel readings. Min/max/+ key (min/ max temperature) • use to toggle between the minimum and maximum recorded readings of indoor & outdoor temperature....
Page 19: Lcd Screen And Settings:
56 lcd screen and settings: receiver low battery indicator outdoor reception signal icon * transmitter low battery indicator time indoor temperature in °c outdoor temperature in °c outdoor channel no..
Page 20
57 * when the signal from the transmitter is successfully received by the temperature station, this icon will be switched on. (if not successful, the icon will not be shown on the lcd). User can therefore easily see whether the last reception was successful (“on” icon) or not (“off” icon). On the ot...
Page 21: Section 1 - Time
58 section 1 - time • display of time (manually set). Section 2 - indoor temperature • display of indoor temperature. Section 3 - outdoor temperature • display of outdoor temperature..
Page 22: Manual Setting:
59 manual setting: 12 / 24- hour time display setting and temperature unit ( °c/°f) setting user may choose to display the time in 12-hour or 24-hour mode: note: when the time display is set as 12-hour mode, the temperature unit will be set to °f; when the time mode is in 24-hour format, the tempera...
Page 23: Time Setting.
60 1. In normal display mode, press and hold the “set/ ch” key for about 3 seconds. The "12h" or "24h" digit will be flashing. 2. Press the “min/max/+” key to set the desired time display mode. 3. Press shortly the “set/ ch” key to advance to the manual time setting. Manual time setting user shall m...
Page 24
61 2. Press the “min/max/+” key to adjust the hour (press and hold to allow fast advance). Press “set/ ch” key to confirm and go to the minute setting. 3. The minute digit will be flashing. Press the “min/max/+” key to adjust the minute (press and hold to allow fast advance). Press “set/ ch” key onc...
Page 25
62 minimum icon.
Page 26
63 2. Press the “min/max/+” key once more to view the maximum indoor temperature and maximum outdoor temperature. Maximum icon.
Page 27
64 resetting the minimum and maximum readings: user may reset the minimum and maximum temperature data to the current value by the following steps: 1. Press the “min/max/+” key once to display the minimum data. 2. Press and hold the “min/max/+” key for about 3 seconds to reset all the minimum / maxi...
Page 28: Temperature Transmitter:
65 temperature transmitter: the outdoor temperature is measured and transmitted to the temperature station every 16 seconds approximately. The range of the temperature transmitter may be affected by the temperature. At cold temperatures, the transmitting distance may be decreased. Please bear this i...
Page 29: 915 Mhz Reception Check
66 915 mhz reception check the temperature station should receive the outdoor temperature data within a few minutes after setup.If the temperature data are not received about 2 minutes after setup (the signal reception icon does not appear), please check the following points: 1. The distance of the ...
Page 30: Note:
67 3. Using other electrical products such as headphones or speakers operating on the same signal frequency (915mhz) may prevent correct signal transmission and reception. 4. Neighbors using electrical devices operating on the 915mhz signal frequency can also cause interference. Note: when the 915mh...
Page 31: Positioning The Temperature
68 the transmission range is about 330 ft. (100 m) from the transmitter to the temperature station (in open space). However, this depends on the surrounding environment and interference levels. If no reception is possible despite the observation of these factors, all system units have to be reset (s...
Page 32
69 to wall mounting. Before wall mounting, please check that the outdoor temperature values can be received from the desired locations. To wall mount: 1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by about 5mm..
Page 33: Positioning The Remote
70 2. Hang the temperature station onto the screw. Remember to ensure that it locks into place before releasing. Positioning the remote temperature sensor the remote temperature sensor can be placed onto any flat surface or wall mounted using the.
Page 34: To Wall Mount:
71 bracket which doubles as a stand or wall mount base. To wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors..
Page 35: Note:
72 2. Clip the remote temperature sensor onto the bracket. Note: the mounting surface can affect the transmission range. If, for instance, the unit is attached to a piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend not to place the unit on an...
Page 36: Care And Maintenance
73 metal or highly polished surface is in the immediate vicinity (garage doors, double glazing, etc.). Before securing in place, please ensure that the temperature station can receive the 915mhz signal from the temperature transmitter at the positions that you wish to place them. Care and maintenanc...
Page 37
74 9 when cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the lcd and casings. 9 do not submerge the units in water. Furthermore, fix all parts in place where the units are adequately protected against moisture and rain. 9 immedia...
Page 38: Specifications
75 opening and tampering with the unit may invalidate their guarantee. 9 do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy. Specifications temperature measuring range indoor : 14.1ºf to +139.8...
Page 39
76 outdoor : -39.9ºc to +59.9ºc with 0.1ºc resolution (-9.9 to +59.9 °c with 0.1°c resolution) (“of.L” displayed if outside this range) indoor temperature checking interval : every 15 seconds outdoor data checking interval : every 16 seconds power supply temperature station : 2 x aaa, iec lr3, 1.5v ...
Page 40: Warranty Information
77 dimensions (l x w x h) temperature station : 2.29” x .69” x 4.66” 58.2 x 17.6 x 118.4 mm outdoor temperature transmitter : 1.44” x .53” x 3.46” 36.6 x 13.5 x 87.9 mm warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in ...
Page 41
78 this limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to the original purchaser of this product. To receive warranty service, the purchaser must contact la crosse technology, ltd for problem determination and service ...
Page 42
79 replaced parts and products become the property of la crosse technology, ltd and must be returned to la crosse technology, ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La crosse technology, ltd will pay all expenses for labo...
Page 43
80 your la crosse technology, ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims mus...
Page 44
81 the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. La crosse technology, ltd will not assume liability for incidental, consequenti...
Page 45
82 this warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information...
Page 46
83 e-mail: support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) web: www.Lacrossetechnology.Com.
Page 47
84 questions? Instructions? Please visit: www.Lacrossetechnology.Com/9121 all rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook...