- DL manuals
- La Crosse
- Weather Station
- WS-9125TWC-IT
- Instruction Manual
La Crosse WS-9125TWC-IT Instruction Manual
Summary of WS-9125TWC-IT
Page 1
1 contents language page ________________________________________________ english 1 french 40 spanish 81.
Page 2: Instruction Manual
2 wireless 915 mhz temperature station instruction manual introduction congratulations on purchasing this compact 915mhz temperature station which displays indoor and outdoor temperature readings. With two easy to use keys, this product is ideal for use in the home or office..
Page 3
3 instant transmission is the state- of-the-art new wireless transmission technology, exclusively designed and developed by la crosse technology. Instant transmission offers you an immediate update (every 16 seconds!) of all your outdoor data measured from the transmitters: follow your climatic vari...
Page 4: Features
4 features removable stand lcd display function keys hanging hole battery compartment cover.
Page 5
5 the temperature station • indoor and outdoor temperature reading in fahrenheit (°f) or celsius (°c) • can receive up to three outdoor sensors • wireless transmission at 915 mhz • signal reception intervals at 16 seconds • minimum and maximum records of indoor and outdoor temperature • low battery ...
Page 6
6 the outdoor temperature sensor • remote transmission of outdoor temperature to temperature station by 915 mhz transmission • water resistant casing • wall hanging or free standing.
Page 7: Setting Up:
7 setting up: when one sensor is used 1. First, insert the batteries to the sensor (see “how to install and replace batteries in the temperature sensor”below). 2. Within 30 seconds of powering up the sensor, insert the batteries to the temperature station (see “how to install and replace batteries i...
Page 8
8 is displayed user may proceed to the next step. 3. After the batteries are inserted, the temperature station will start receiving data signal from the sensor. The outdoor temperature should then be displayed on the temperature station. If this does not happen after 2 minutes, the batteries will ne...
Page 9
9 using multiple sensors with one temperature station 1. User shall remove all the batteries from the temperature station and sensors and wait 60 seconds if setting has been done with one sensor before. 2. Insert the batteries to the first sensor. 3. Within 30 seconds of powering up the first sensor...
Page 10
10 4. The outdoor temperature from the first sensor (channel 1) should then be displayed on the temperature station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. 5. Insert the ...
Page 11
11 7. Insert the batteries to the third sensor immediate after (in 10 seconds after) inserting battery to the second sensor. 8. Then within 2 minutes, the channel 3 outdoor data from the third sensor will be displayed and the channel icon will shift back to "1" once the third sensor is successfully ...
Page 12
12 after the three sensors have been set up, user may need to check the readings displayed on the temperature station against those being shown on the sensor displays, in order to recognize on which channel each sensor is being presented. Important: transmission problems will arise if the setting fo...
Page 13
13 how to install and replace batteries in the temperature station the temperature station uses 2 x aaa, alkaline batteries. When batteries will need to be replaced, the low battery icon will appear on the lcd. To install and replace the batteries, please follow the steps below: 1. Lift up the batte...
Page 14
14 how to install and replace batteries in the temperature sensor the temperature sensor uses 1 x cr2032, 3.0v battery. When battery needs to be replaced, the low battery icon will appear on the lcd of the temperature station-or replace battery every 12 months. To install and replace the batteries, ...
Page 15: Battery Change:
15 note: in the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the sensor at start-up and this code must be received and stored by the temperature station in the first few minutes of...
Page 16: Function Keys
16 please participate in the preservation of the environment. Return used batteries to an authorized depot. Function keys temperature station: the temperature station has two easy to use function keys..
Page 17
17 set/ch key (setting/channel) • press and hold for about 3 seconds to toggle between the temperature units (°f) or (°c). Min/ max/ + key set/ ch key.
Page 18
18 • press shortly to toggle between different channel readings. Min/max/+ key (min/ max temperature) • use to toggle between the minimum and maximum recorded readings of indoor & outdoor temperature. • press and hold to reset minimum and maximum record (when min or max record is shown)..
Page 19: Lcd Screen And Settings:
19 lcd screen and settings: receiver low battery indicator outdoor reception signal icon * transmitter low battery indicator indoor temperature in °f outdoor temperature in °f outdoor channel no..
Page 20
20 * when the signal from the sensor is successfully received by the temperature station, this icon will be switched on. (if not successful, the icon will not be shown on the lcd). User can therefore easily see whether the last reception was successful (“on” icon) or not (“off” icon). On the other h...
Page 21: Manual Setting:
21 section 2 - outdoor temperature • display of outdoor temperature. Manual setting: temperature unit (°f) or (°c) • user may choose to display the temperature readings in the unit of degree fahrenheit (°f) or celsius (°c). By pressing and holding the set/ch key for about 3 seconds, the temperature ...
Page 22
22 viewing the minimum and maximum readings: user may consult the minimum and maximum recordings for indoor temperature, and outdoor temperature by following these steps: 1. Press the “min/max/+” key once to view the minimum indoor temperature and minimum outdoor temperature. Minimum icon.
Page 23
23 2. Press the “min/max/+” key once more to view the maximum indoor temperature and maximum outdoor temperature. Maximum icon outdoor channel no..
Page 24
24 resetting the minimum and maximum readings: user may reset the minimum and maximum temperature data to the current value by the following steps: 1. Press the “min/max/+” key once to display the minimum data. 2. Press and hold the “min/max/+” key for about 3 seconds to reset all the minimum / maxi...
Page 25: 915 Mhz Reception Check
25 temperature sensor: the outdoor temperature is measured and transmitted to the temperature station approximately every 16 seconds. The range of the temperature sensor may be affected by the temperature. Cold temperatures may decrease the transmitting distance. Please bear this in mind when placin...
Page 26
26 1. The distance of the temperature station or sensor should be at least 5 to 6.5 feet (1.5 to 2 meters) away from any interfering sources such as computer monitors or tv sets. 2. Avoid positioning the temperature station onto or in the immediate proximity of metal window frames. 3. Using other el...
Page 27
27 for 45 seconds, the frequency is changed to 920mhz and the learning is tried another 45 seconds. If still not successful the reception is tried for 45 seconds on 910mhz. This will also be done for re-synchronization. When the 915mhz signal is received correctly, do not re-open the battery cover o...
Page 28: Positioning
28 possible despite the observation of these factors, all system units have to be reset (see setting up above). Positioning positioning the temperature station: the temperature station comes attached with a table stand, which provides the option of table standing the unit in addition to wall mountin...
Page 29
29 to wall mount: 1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by about 5mm. 2. Hang the temperature station onto the screw. Remember to ensure that it locks into place before releasing..
Page 30
30 positioning the remote temperature sensor the remote temperature sensor can be placed onto any flat surface or wall mounted using the bracket which doubles as a stand or wall mount base..
Page 31
31 to wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature sensor onto the bracket..
Page 32
32 note: the mounting surface can affect the transmission range. If, for instance, the unit is attached to a piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend not to place the unit on any metal surfaces or in any position where a large metal ...
Page 33: Care And Maintenance
33 care and maintenance • extreme temperatures, vibrations and shocks should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. • when cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the l...
Page 34
34 • immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. • do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified engineer. Opening and tampering with the un...
Page 35: Specifications
35 specifications temperature measuring range indoor : 14.1ºf to +139.8ºf with 0.2ºf resolution (-9.9 to +59.9 °c with 0.1°c resolution) (“of.L” displayed if outside this range) outdoor : -39.8°f to 139.8°f with 0.2ºf resolution (-39.9°c to +59.9°c with 0.1°c resolution) (“of.L” displayed if outside...
Page 36: Warranty Information
36 power supply temperature station : 2 x aaa, iec lr3, 1.5v temperature sensor : 1 x cr2032, 3.0v battery life cycle (alkaline batteries recommended) temperature station : approximately 24 months temperature sensor : approximately 12 months dimensions (l x w x h) temperature station : 2.29” x 0.69”...
Page 37
37 la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to the original purchaser ...
Page 38
38 crosse technology, ltd or la crosse technology, ltd’s authorized service center. La crosse technology, ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty per...
Page 39
39 all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your la crosse technology, ltd p...
Page 40
40 reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage res...
Page 41
41 normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. La crosse technology, ltd will not assume liability for incidental, consequential, punitive, or other similar damages associated with the oper...
Page 42
42 this warranty gives you specific legal rights. You may also have other rights specific to your state. Some states do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information...
Page 43
43 fax: 608.796.1020 e-mail: support@lacrossetechnology.Com (warranty work) sales@lacrossetechnology.Com (information on other products) web: www.Lacrossetechnology.Com.
Page 44
44 question? Instructions? Please visit: www.Lacrossetechnology.Com/9125 all rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook ...