La Crosse WS-9520U Instruction Manual

Manual is about: WEATHER PROJECTION STATION

Summary of WS-9520U

  • Page 1

    1 battery compartment function keys weather projection station instruction manual introduction: congratulations on purchasing this state-of-the-art weather projection station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, moon ph...

  • Page 2

    2 • can receive up to 3 remote temperature/humidity sensors • time projection display (hour and minute) • outdoor temperature projection display (degrees ºf or ºc) • alternate projection display mode selectable • projection with adjustable brightness and projection orientation possible • lcd contras...

  • Page 3

    3 battery change: it is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units. Please participate in the preservation of the environment. Return used batteries to an authorized depot. Setting up the weather projection station can be either bat...

  • Page 4

    4 to use the weather projection station power adapter the unit comes with an ac adapter for using the projector for an extended period of time, such as throughout the night. To connect the ac adapter: important! Make sure that your household voltage is 120v! Otherwise it can result in damaging your ...

  • Page 5

    5 note: if the weather projection station is powered through the ac adapter, the projection will be constantly on. If the weather projection station is battery operated the projection will turn on only when the snooze key is pressed. Once the snooze key is released, the projection and e.L. Backlight...

  • Page 6

    6 the wwvb radio station receives the time data from the nist atomic clock in boulder, colorado. A team of atomic physicists is continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a...

  • Page 7

    7 key (direction key) • project the image direction (can display 4 different orientations) • back-light on display key • toggle between the time and outdoor temperature or automatic alternates time/outdoor temperature every 5 seconds display mode for projection • back-light on alarm 1 key • enter/ex...

  • Page 8

    8 alarm time weather tendency indicator time display calendar display indoor relative humidity in rh% alarm icon indoor temperature in ºf/ ºc weather forecast icon outdoor data signal reception indicator outdoor temperature in ºf/ ºc outdoor transmitter identification number outdoor relative humidit...

  • Page 9

    9 the time zone default of the weather projection station is est –5. To set a different time zone: 1. The current time zone value starts flashing. 2. Use the ch/+ key to set the time zone. The range runs from 0 to -12 and then runs from +12 back to 0 in consecutive 1-hour intervals. The u.S. Time zo...

  • Page 10

    10 1. The hour digit will start flashing. 2. Use the ch/+ key to set the hour. 3. Press again the set key to set the minutes. The minute digits start flashing. 4. Use the ch/+ key to set the minutes. 5. Confirm with the set key and enter the calendar setting. Note: the unit will still try to receive...

  • Page 11

    11 icons flashing the temperature display can be selected to show temperature data in °f or °c (default °f). 1. Use the ch/+ key to toggle between “°f” or “°c”. 2. Confirm with the set key and enter the weather forecasting icon sensitivity setting. Weather forecasting icon sensitivity setting: for l...

  • Page 12

    12 sunny cloudy rainy to stop the alarm, press any key (except the displ and keys ) during alarm ringing. Or press and hold the snooze key for 2 seconds (a beep sound can be heard). Weather forecast and weather tendency indicator: weather forecast icons the weather forecast can be displayed a s foll...

  • Page 13

    13 weather tendency indicator working together with the weather icons is the weather tendency indicators (located on the right side of the weather icons). When the indicator points upwards, it means that the air-pressure is increasing and the weather is expected to improve, but when indicator points...

  • Page 14

    14 toggling and resetting the outdoor recordings: 1. To toggle between the outdoor current, min/max temperature and humidity data and the times (for temperature data only) that were recorded press the min/out key: once to show the max outdoor temperature and humidity data with the recorded time and ...

  • Page 15

    15 note: when the 433 mhz-signal is received correctly, do not re-open the battery cover of either the remote temperature/humidity sensor or weather projection station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (s...

  • Page 16

    16 relative humidity measuring range: indoor and outdoor : 1% to 99% with 1% resolution (“- -” displayed if outside this range) indoor temperature checking interval : every 15 seconds indoor humidity checking interval : every 20 seconds outdoor temperature reception : every 5 minutes transmitter che...

  • Page 17

    17 your la crosse technology, ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims mus...

  • Page 18

    18 fcc id: omo-01rx (receiver), omo-01tx (transmitter) this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept interference received, including interference that may ca...