1. DL manuals
  2. La Crosse
  3. Weather Station
  4. WS7138
  5. User Manual

La Crosse WS7138 User Manual

Manual is about: Thermo Hygro Station

Summary of WS7138

  • Page 1

    Wireless 433mhz weather station introduction: congratulations on purchasing this weather station with wireless 433mhz, which displays time/date, indoor/outdoor temperature and humidity, and receives up to two outdoor temperature and humidity channels. To enjoy the full benefits of this innovative pr...

  • Page 2

    Setting up: please follow these steps to ensure that your new weather station works correctly with the temperature transmitter(s): 1. First, insert the batteries into the weather station (see “how to install and replace batteries in the weather station”below). Once the batteries are in place, all se...

  • Page 3

    7. If after 10 minutes, the dcf time has not been received, use the in/out/set/ch key to manually enter a time initially. The clock will automatically attempt to receive the dcf time at each full hour or after manual set time. When this is successful, the received time will override the manually set...

  • Page 4

    In/out/set/ch key: • enter manual setting modes: ºc/ºf temperature, 12/24 hour time, manual time and calendar • toggle between indoor/outdoor temperature and humidity data (outdoor data can only be displayed if optional transmitter is purchased) • select outdoor transmitter (if more than 1 transmitt...

  • Page 5

    There is a radio signal present and is trying to receive it. When the time code is received, the dcf tower becomes permanently lit and the time will be displayed. If the tower icon flashes, but does not set the time or the dcf tower does not appear at all, then please take note of the following: 1. ...

  • Page 6

    Minutes flashing the hour display can be selected to show hours in 12-hour or 24-hour settings. (default 24-hour) 1. Use the “min/max/+” key toggle between “12h” or “24h”. 2. Press again the “in/out/set/ch” key to confirm and enter the “manual time setting”. Manual time setting in case the weather s...

  • Page 7

    Using the weather station: the humidity level bar: located above the temperature/humidity display, it shows the relative humidity level. The range is from 16% to 98%, and each bar corresponds to 2% of relative humidity. It automatically changes accordingly to the indoor/outdoor humidity display. In ...

  • Page 8

    1. Press the “min/max/+” key. The max indoor relative humidity record will show with the time record (humidity record and humidity level bar flashing). 2. Press the “min/max/+” key, the max indoor relative humidity record shows with the date record (humidity record and humidity level bar flashing). ...

  • Page 9

    Note: the relative humidity record displayed next to the min/max temperature is not the min/max relative humidity record, but the relative humidity recorded at this specific time. Min/max outdoor humidity reading (optional) 1. Press the “min/max/+” key. The max outdoor relative humidity record will ...

  • Page 10

    Note: should after checking the above list an outdoor temperature is still not received, then reset all the units. Thermo-hygro transmitter (optional): the temperature and humidity are measured every 1 minute and transmitted every 1 minute. The range of the thermo-hygro transmitter may be affected b...

  • Page 11

    • do not make any repairs to the units. Please return them to the original point of purchase for repair by a qualified engineer. Opening and tampering with the units may invalidate its guarantee. Specifications: temperature measuring range indoor : -9.9ºc to +50ºc with 0.1ºc resolution (“of.Lºc” dis...