La Crosse WT489 Instruction Manual - page 11
P. 11
2.
Press ▲ or ▼ to select a radio station you like to preset memory.
3.
Then press and hold the SET / MEM for 2 seconds until
icon flashes and “01” is
shown under the radio frequency digits.
4.
Press and hold SET /MEM for 2 second to store Memory 01.
icon becomes static.
To preset Memory 2 and other FM station
1.
Press ▲ or ▼ to select another radio station you want to preset.
2.
Press and hold SET / MEM for 2 seconds until
flashes and “01” appears at upper
right of LCD.
3.
Single press SET / MEM
to select “02”, then press and hold SET/ MEM to store Memory 2.
4.
Repeat above step 1-3 to preset up to ten FM stations.
5.
To listen to a preset station at any time: turn on the radio first, single press the SET /MEM to
select a preset station while the radio is on.
6.
To edit a preset station, select another station and then repeat Step 2-4. This overrides the
original setting.
TO USE THE SLEEP TIMER
You could use Sleep Timer to control your light, radio, nature sound or music before you go to sleep.
1.
Press the SLEEP once, the LCD display shows the SLEEP
icon and “120” (120 minutes) and
flashes. Press SLEEP one at a time to select a 120-, 90-, 60-, 45-, 30-, 15-, 10-, 5-minute
sleeptimer.
2.
The sleep timer display remains for few seconds and then returns to normal time display. The
icon will appear, showing the timer is activated.
3.
The radio will play for the programmed sleep time and then shut off. To check how many
sleep time is remaining, press SLEEP once.
4.
To turn off the radio before the sleep time has elapsed, press and hold MODE for 2 seconds.