LA Fitness GK867 Owner's Manual - page 5
4
Step Three:
Attach the Saddle (29) to the Saddle slider (30) with the Knob nut (33) and the Flat washer
(32).Insert the Saddle post (34) into the post of Main frame (1), and then fix it with the
Pop-pin Knob (36) after adjusting to a suitable height.
Step Four:
1.Insert the Handlebar post cover (14) into the Handlebar post (4) and then connect the
Connection wire (11) well with the Sensor wire (9), and finally connect the Tension wire (10)
with the wire of Tension controller (15) as picture A shown.
2.Fix the Handlebar post (4) on the post of the Main frame (1) with the Allen pan head
screw (12) and the Curved washer (13) as shown.
3.Finally, cover the Handlebar post cover (14) to the joint of Handlebar post (4) and the
Main frame (1).