1 velocity ii owner’s manual.
2 assembly parts item# description qty 1 upright 1 2 frame 1 25 front stabilizer 1 27 rear stabilizer 2 29 tube shelf 1 30 handrail 2 36 computer 1 37 seat 1 40 adjustment knob 1 51 pedal (l) 1 52 pedal (r) 1.
3 assembly screws item# description qty 42 t-shaped knob 1 43 screw 2 44 spring washer 10 45 arc washer 6 46 acorn nut 2 47 truss hex screw 8 48 washer 4 49 allen wrench 1 50 open spanner 1.
4 assembly instruction 1. Fix the front stabilizer (25) with open spanner (50), screw (43), spring washer (44), arc washer (45) and acorn nut (46). Plug the rear stabilizer into the frame and fix with allen wrench (49), truss hex screw (47), spring washer (44) and washer (48). Please pay attention t...
5 3. Fix seat (37) on the tube (29) with wrench (50), nylon nut (38) and washer (39). Untie the knob (4) on the frame, insert the tube into the frame and tie the knob (4). 4. Connect the thrum of the sensor wire (5) with the guide thread, pull upgrade along the upright (1). Plug the upright into the...
6 5. Plug the adjustment tightwire (18) into the adjustment knob (40) and then put into the upright (1). Fix them with open spanner (50) and truss philips screw (41). 6. Fix the handrail (30) on the upright (1) with t-shaped knob (42)..
7 7. Connect the tie-in of sensor wire (6) with the tie-in of the computer (36). Then insert the computer (36) along with the computer plate and fasten the screw (54) and washer (55) with open spanner. Plug the hand pulse wire (34). Assembly finishes..
8 computer operation instructions frontview fig. 1 function mark: 1. Scan: auto scan 5. ⊙: signal mark 2. Speed: speed 6. Odo: odometer 3. Dist: trip distance 7. Cal: calories 4. Time: riding time 8. : pulse mark summary: this monitor is equipped with an auto on/auto off function. The computer will ...
9 fig. 2 functions and operations: ● reset press the button more than 3 seconds will reset all functional values to zero except odo． ● scan press the button until the arrow points to scan, monitor will automatically cycle display time，speed，dist，cal and odo. ● speed:( unit=km/h or mph) press the but...
10 monitor will show you r current heart beat rate in beats per minute(bpm)on the lcd after 3~4 seconds． remark: during the process of pulse measurement，because of the contact jamming，the measurement value may be higher than the virtual pulse rate during the first 2~3 seconds, then will return to no...
