La Gard KEYLOCK 2270 Operating And Changing Instructions

(P/N) 747.1210 Rev A 01/11 © copyright 2006-2011   

Kaba Mas LLC

Page 1 of 2

OPERATING AND CHANGING INSTRUCTIONS

KEYLOCK

2270 KEY LOCK

Lock Operations

Open Lock

      1. Insert the Setup Key (or current Operating Key) into the lock, through the 

        keyhole Escutcheon Cover (P/N 2226) or Escutcheon Plate (P/N 2219) on the 

        front of the safe door (Figure 1). 

CautiOn: Never force the key into the lock. This could cause permanent 

damage to the Lock or the Key. Once the Key is inserted, do not apply 

inward or outward axial force to the Key. This could prevent the Lock from 

opening correctly.  

 2. Turn the Key to the RIGHT (CW) until it stops, and the bolt is retracted. 

nOte: The Key cannot be removed while the bolt is retracted. 

      3. Open the safe door. 

Close Lock 

      1. Close the safe door.

  2. Turn the Key to the LEFT (CCW) until it stops.

   3. 

Remove 

the 

Key.

Set or Change Operating Key

The 2270 Keylock is shipped from LA GARD set to open with a factory Setup Key. The 

Lock installation should be completed prior to setting the Lock to open with an Operating 

Key. Refer to 2270 Keylock Installation Instructions (748.1210). 

Escutcheon Index

Key Index

Figure 1