1. DL manuals
  2. La Pavoni
  3. Coffee Maker
  4. EVOLUTION P3
  5. Operating Instructions Manual

La Pavoni EVOLUTION P3 Operating Instructions Manual

Manual is about: La Pavoni Coffeemaker User Manual

Summary of EVOLUTION P3

  • Page 1

    P3 / p3 evolution cod. 2850017 - rev . 00 - marzo 2009 ®.

  • Page 2

    Pag. 2 technical characteristics dimensions: height 62 cm width 42 cm depth 40 cm weight: 35 kg voltage supply: 230 vac. 50 hz or 120 vac. 60hz on request absorbed power: 1,6 kw selections: 11 selections. System of payment: predisposed for obliterator / token system 24vdc selector 12vac or 24vac exe...

  • Page 3

    Pag. 26 water flow diagram pag. 3 grinder the quantity of ground coffee is adjustable through a screw (2); screwing it the quantity decreases, while unscrewing it, the quantity increases.. To adjust the degree of grinding, after having pushed the lock (6), act on the grind-stone holder (1), clockwis...

  • Page 4

    Pag. 4 installation before installing the machine, read carefully this manual. Install the machine in a dry and hygienic place. Electric connection before connecting the machine to an electric plug, please follow these precau- tions: • the main supply must correspond to the power requirements of the...

  • Page 5

    Pag. 24 electrical diagram pag. 5 hydraulic connection the machine could be installed on: • a cabinet with place for cups, spoons and sugar and a water tank of 15lt • a small base with waste containers (the machine has to be with mains water connection). On cabinet place the dispenser on the base an...

  • Page 6

    Pag. 6 switching on after having followed all the instructions of installation, it is possible to turn on the machine through the light switch situated on the frontal side of the electric panel. At the switch on of the machine, it appears on display for a brief time the message of the version softwa...

  • Page 7

    Pag. 22 quick functions in this section, it is possible to perform some of the most useful functions by the loader. To access press the button “quick menu” of the keyboard (see page 6). On display you will see “quick menu ” pushing the relative number, you will execute these following functions:: 1....

  • Page 8

    Pag. 8 set drinks entering the program through e, you will see the sequence of the existing drink codes. The flashing cursor points out the drink code selected, to move it use the keys + to advance or - to withdraw; contemporarily to the movement of the cursor, in the underlying line, the name of th...

  • Page 9

    Pag. 20 it is possible to eliminate, to modify or to insert movements or to change its regu- lations where possible, for example the dosing of the products. · to move the selection cursor movement use + and - · to insert a new movement in the selected position press" 2" · to eliminate the selected m...

  • Page 10

    Pag. 10 counters & amounts in this menu it is possible to notice the counters of the various selections and eventually to reset them. Press e to enter the menu that is composed in the following parameters: total counters&amounts total in normal working of counters and amounts (pcs.) from the last ze...

  • Page 11

    Pag. 18 electrical output to choose the output, push + or -, to supply it, press enter. To exit from this menu, press prog. N° description 1 not used 2 grinder motor 3 coffee releaser solenoid 4 espresso unit motor 5 etv espresso 6 pump 7 etv / whipper sol. 1/2 (milk / chocolate) 8 powder motor sol....

  • Page 12

    Pag. 12 main menu to access this menu, keep pressed the button prog for 5 seconds. The menu is composed by the followings programs: payment system setting of the system of payment and its options. Set temperature setting of temperatures and other functions on the boilers. Options: insert password en...

  • Page 13

    Pag. 16 options: level 2 (manager- technician) after having inserted the correct password, that it initially is" ask to manufac- turer", you will enter in the following menu: modify password level 1: insert the new password and press e to con- firm. Modify password level 2: insert the new password a...

  • Page 14

    Pag. 14 set temperature the followings programs compose this menu: set boiler 1 temperature set-up of the boiler 1 temperature. Time overheating boiler 1 after this time of “machine stopped” the boiler 1 is overheated. Set overheating boiler 1 value of overheating of the boiler 1 (max. 5°c). Time fi...