Lab 12 Gordian Owner's Manual - page 4
LAB12 Gordian - Multifunctional Power Distributor / Conditioner
Unpacking
LAB12 Gordian should be removed from its box with care. Remove all the polystyrene protective pieces
of the box before you unpack Gordian. Unpack Gordian with your hands on both sides of the device.
Warnings
No user serviceable parts are included inside. Do not unscrew the cover; high voltages remain after
disconnecting from mains. In case your device requires any kind of service, please ship or take your
equipment directly to LAB12 or to one of our authorized dealers or other qualified personnel.
Always use same type of fuse for replacement.
Installation& Placement
LAB12 Gordian should be placed on a solid flat surface. You should avoid placing it near a heat source as
this could compromise the performance and reliability. You should never place another component
directly on top of this device. Make sure that your Gordian has an adequate flow of air around it. Gordian
could be warm in some points; this is normal and within parts specifications. Take care of the front panel
finest luxury finishing using a soft dry cloth.