Lab 12 MIGHTY Owner's Manual

Summary of MIGHTY

  • Page 1

    Owner’s manual mighty class a single ended power amplifier www.Lab12.Gr.

  • Page 2

    Lab12 mighty class a single ended power amplifier table of contents it is yours features installation & placement front panel rear panel main connections for the safety of your equipment specifications.

  • Page 3

    Lab12 mighty class a single ended power amplifier it is yours! Thank you for selecting the lab12 mighty, a really audiophile class a power amplifier. Every component on it is designed to provide smooth and untreated sound. It is a full tube amplifier with 6n1p nos russian driver tubes and el34 russi...

  • Page 4

    Lab12 mighty class a single ended power amplifier features el34, 6550, kt88 compatible (el34 form factory) triode / ultra linear selector switch handcrafted custom audio grade transformers (t.Giatras) no feedback design toroidal power transformer (t.Giatras) special audio grade matched parts in ever...

  • Page 5

    Lab12 mighty class a single ended power amplifier front panel mighty front panel at front panel you will see three indication leds and two vu meters. The three leds (c) indicates that the device is powered on. To the left of 3 leds you see a retro analog vu meter (a). You can accurately monitor the ...

  • Page 6

    Lab12 mighty class a single ended power amplifier rear panel mighty rear panel in rear panel you will find the connection inputs and outputs. To the right side you will find an iec ac input. Below iec input is located the main fuse holder (a) and the power switch (b). A pair of rca connectors (c) is...

  • Page 7

    Lab12 mighty class a single ended power amplifier main connections connect a high grade power cable to the iec input and to your wall socket. Make sure that your wall socket provides a good ground before connecting the power cable. You must supply 230 to 240 volts ac (50hz). (every mighty is tuned a...

  • Page 8

    Lab12 mighty class a single ended power amplifier specifications power: 230/240 volt ac 50hz power consumption: 120 va max (2.5 a fused) rated output power: 10 watt per channel frequency response: 20hz-20khz (-0.9db) input impedance: 100k ohms output impedance: 4,8 ohm tube complement: 2x 6n1p dual ...