Labconco 3940200 User Manual - Connecting to The

15 

Chapter 3:  Getting Started

Connecting to the 

Exhaust System (Optional 

on XPert Filtered Balance 

System) 

The exhaust system should be installed by a 

qualified HVAC contractor. 

The exhaust connection on the XPert Filtered 

Balance Station has been designed to accept 6" 

diameter ductwork as shown in Figure 3-2.  The 

exhaust connection ships uninstalled on the top and 

needs to be fastened with the screws provided.  See 

Chapter 7 for ordering exhaust transition kits for the 

XPert Filtered Balance System.  Exhaust transition 

kits aid in the removal of chemicals or applications 

where a higher degree of powder and particulate 

removal is required.  Review Chapter 2 for exhaust 

prerequisites and review Chapter 7 for ordering 

blower exhaust equipment.  See Figure 3-2 for the 

XPert Station and Figure 3-3 for exhaust kit options 

for the XPert Filtered Balance System. 

Consult Labconco Customer Service should you 

require help sizing your blower for the exhaust 

volume and system static pressure loss. 

To ensure compatibility, the selected exhaust duct 

material should match the enclosure, procedures 

and chemical applications.  

! 

WARNING:  The weight of the exhaust 

ductwork system must be supported 

independently of the enclosure superstructure 

or damage may occur. 

! 

XPert 

Station