Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com.
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 2 contents contents 2 technical info 3 overview 4 controls 5 power supply 6 remote input 7 advices 8 troubleshooting 9 recall sheet 10
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 3 technical info controls § output level (volume) § rotor (speed) § stator (depth) technology § selected components § robust diecast enclosure § cliff et lumberg connectors specifications § true bypass 3pdt switch. § cons...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 4 overview the heli fuzz is classified in the family of sound "chopper". The signal is clipped by a fuzz ultra type stage. The sound processed by the fuzz can be chopped like a tremolo. It has a volume control, speed control (rot...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 5 controls i – the potentiometers 1. Volume this control adjusts the output level of the heli fuzz. 2. Rotor rotor can control the speed of the hash. Tempo range is 60 to 250 3. Stator this setting affects the depth of the hash s...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 6 power supply labo ★ k effects pedals are powered by 9v dc battery or external power adapter using the « boss ™ » standard (negative (-) in the center, positive (+) outside. The pedal can be supplied in several ways: § 9v inter...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 7 remote input it also has a control input of the rotor. It is possible to connect several kinds of commands in this entry: a selector for selecting acurate hash speeds very useful in studio or when a particular tempo must be res...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 8 advices to keep the integrity of the sound, use good quality mono jack cords exclusively. To extend the life of the battery, remove the connector of the input jack when not using the device. Replace the battery when the light i...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 9 troubleshooting stage 1 no sound comes out of the device: § verify that all your equipment works without the pedal. § insert the pedal into the chain. § if the sound takes out in by pass mode, go directly to the stage 2. If ...
Labo ★ k effects – www.Labo-k-effects.Com – contact@labo-k-effects.Com 10 recall sheet.
