Labo K Effects Spinyverb Manual - page 8
of
9
Labo ★ K Effects –
www.labo-k-effects.com – contact@labo-k-effects.com
8
troubleshooting
STAGE 1
No sound goes out of the device:
§
Verify that all your equipment works without the pedal.
§
Insert the pedal into the chain.
§
If no sound output when the device is switched on, skip to step 4
STAGE 2
§
If the LEDs light up correctly the device is switched on, go to step
4.
STAGE 3
If The light shines weakly or not at all and if the sound is weak and
very distorted:
§
Verify the connection of the power cable.
STAGE 4
Your device is breakdown:
§
Contact Labo
★ K Effects by mail