Laboga THE BEAST User Manual - Front Panel
LABOGA – T
HE
B
EAST
MANUAL
FRONT PANEL
Combo
version
:
Head version:
1. Input socket
Input jack socket (TS 1/4” jack) to
connect a guitar, with wide signal level
rage.
2. Clean Gain knob
Sensitivity of the clean channel. Some
guitars require more gain to get the
same volume, as ones with stronger
signal.
HINT: The setting of this knob not only
controls the sensitivity, but also allows
to control the volume balance between
clean and drive channel.
3. Character knob
This knob is a unique version of tone
control. It consist 3-band stack, but
reduced into one knob, so it works as a
“tone selector”. Each “Character”
setting, from “0” to “10”, represents
different setup of Bass, Middle and
Treble knobs.
So, In every position of the knob, a
different tone is obtained - not as the
same, as the regular guitar “tone”
regulator, which only cuts treble.
Everything works only for the clean
channel.
HINT: Move the knob from “0” to “10”
and find your best individual setting.
Don't be afraid of both extreme
settings.
4. Channel selection switch
Switch to change channels of the
amplifier. It works only when Jack is
unplugged from the Footswitch socket.
In position “up” the clean channel is
on, whereas, in position “down” the
distorted channel is on.
Page 6