Labomed CZM6 User Manual

Other manuals for CZM6: User Manual
Manual is about: Stereo Zoom

Summary of CZM6

  • Page 1

    Www.Laboamerica.Com ideas for vision czm6 stereo zoom microscope user manual to ensure proper use of this instrument as well as to avoid injury while operating instrument, understanding this manual completely before use is highly recommended..

  • Page 2

    Instruction manual 1. Introduction 1 2. Photographic view - binocular 2 - trinocular 3 3. Contents 4 4. Initial set up 5 5. Operating procedure 5 6. Fine adjustment of binocular head 6 7. Changing magnification 6 8. Changing bulb for incident & transmitted light 7 9. Changing bulb for transmitted il...

  • Page 3

    1 introduction czm6 stereo zoom microscope user manual 1 the czm6 microscope is a professional grade imaging system with a modern design that incorporates both the latest in optical and mechanical advancements in stereo microscopy. The czm6 microscope is a versatile system which offers various confi...

  • Page 4

    Czm 6 - binocular binocular viewing body stage plate on/off switches for incident and transmitted illumination focusable eyepiece zoom control knob focussing knob stage clips incident light 2 photographic view czm6 stereo zoom microscope user manual 2.

  • Page 5

    Czm 6 - trinocular trinocular viewing body stage plate on/off switches for incident and transmitted illumination focusable eyepiece zoom control knob focussing knob stage clips incident light czm6 stereo zoom microscope user manual 3.

  • Page 6

    3 contents czm6 stereo zoom microscope user manual 4 remove the microscope components from the styrofoam box and verify all the components of the microscope as per product code are present, as ordered: stand hl stand, inclined light with reflector bulb 12v20w halogen, bottom light 12v10w halogen cfl...

  • Page 7

    4 initial setup czm6 stereo zoom microscope user manual 5 observation head remove observation head from styrofoam box and follow the following steps: (i) loosen the head locking screw provided in microscope pod. (ii) place the observation head on the pod and secure by tightening the head locking scr...

  • Page 8

    Rotate the observation head to bring it to a convenient position. Normally it is kept aligned and not rotated. ● adjust interpupillary distance by bringing the eyepiece tubes closer or apart till you see one fused image. ● if the image from both oculars has any loss in sharpness, you can adjust the ...

  • Page 9

    Outer cover 8 changing bulb for incident & transmitted lamp 9 changing bulb for transmitted illumination czm6 stereo zoom microscope user manual 7 1 use any 12v-20w halogen with reflector dia 35mm for incident light (ge, osram bulbs suggested). 2 turn the microscope off. Unplug the microscope by rem...

  • Page 10

    The ac inlet socket on the back panel has an inbuilt fuse compartment which houses two fuses. One fuse is live and one fuse is a spare unit and can be replaced. Please follow the following steps when replacing a fuse. Remove power plug from microscope before doing any replacement of fuse. Use a flat...

  • Page 11

    L designed for indoor use l installation category ii l pollution degree 2 l indoor use l altitude : 2000 mtrs. L temp. : 5º c - 40º l relative humidity : maximum 80% at temp. Upto 31º c l supply voltage shall not exceed 10% of the rated input voltage caution : high voltage fuse replacement warning :...

  • Page 12

    Pole stand hl stand boom stand with bonder arm 4122047 412085-000 4122042 dual light stand 4122086-000 sb stand w/o top light 412088-000 size: l 245 x w 175 x h 320mm size: l 245 x w 175 x h 260mm size: l 245 x w 250 x h 385mm size: l 245 x w 175 x h 270mm size: l 245 x w 175 x h 235mm 12 accessorie...

  • Page 13

    Labomed and czm6 are registered trademarks of labo america, inc. With a policy of continuous development, labo america, inc. Reserves the right to change design and specifications without prior notice. 2007 labo america, inc. Www.Laboamerica.Com.