Laboratory PPS LGS - 304 Operation Manual

Summary of LGS - 304

  • Page 1

    Acoustic noise generator lgs - 304 operation manual st. Petersburg 2012.

  • Page 2: 1. Introduction

    Contents: 1. Introduction................................................................................................. 2 2. Scope of application..................................................................................... 2 3. Main technical data.............................................

  • Page 3: 3. Main Technical Data

    3. Main technical data 3.1 the parameters of the product correspond to the requirements specified in table 1. Table 1 № parameter parameter value 1. Input voltage of secondary power source 220 v, 50 hz 2. Voltage of the main unit: 24 v 3. Frequency range of output acoustic signal, hz 90 - 11200 4. A...

  • Page 4: 4. In Box

    4. In box the product's in box is specified in table 2 table 2 № name pcs 1. Lgs-304 - main unit 1 2. Bracket 1 3. Mounting screws of the bracket 2 4. Mounting screws 2 5. Gasket 2 6. Power supply with output voltage 24 v 1 7. Operation manual 1 8. Passport 1 9. Mark of conformity 1 10. Copy of fste...

  • Page 5

    7. Installation and operation procedures 7.1 after storing the product in a cold room or transporting in winter conditions, it can be plugged in not earlier than after 4 hours stay at room temperature. 7.2 before installing make an external examination of the product to make sure there is no mechani...

  • Page 6

    1 - generator block, 2 -mounting screws, 3 – bracket, 4 - jack-point screw, 5 – wall, 6 – gasket figure 2 - wall mounting 7.8 preparation for work is as follows: 7.8.1 connect secondary regulated power supply to the main unit of the product observing polarity (color coded output +24v-not marked outp...

  • Page 7: 8. Maintenance

    8. Maintenance 8.1 the product is maintenance free. Maintenance procedures are carried out at least once a year involving: - checking the integrity of the case; items, cable connectors fixing, power wires reliability; - dust and dirt cleaning. 8.2 maintenance procedures are carried out without curre...