LabRepCo 21641 Owner's manual - | 13
P a g e
| 13
Before starting to use the data logging feature, please take a moment to read
through the following instruction.
The logger is programmed to record the temperature every 60 seconds. It can store
up to 365 days data. Once the data storage is full, the newest data will overwrite
the oldest data.
Computer System Specification: Windows XP, 7, and 10, home or professional
edition.
INSTALLATION –
1. Insert the USB drive (included in the package) to your computer. Follow the
instruction to install the logging program on your computer. It may take a
few minutes to complete the installation. (Default Location:
HorizonScientific -> DeviceUtility -> DisplayDevice_Utility.exe)
OPERATION –
2. Connect the USB cable (included in the package) to the display and to your
computer.
3. Start the logging program on your desktop shortcut. You
should see the logger on the program selection. If not,
close out the program and restart it again, and check the
USB cable connection.
4. Click [MENU] icon. Select [Retrieve Device Logged Data].
5. The program will automatically retrieve the data from the display. Please
note, it may take a moment to download the data. At this moment, you will
also see the data is being downloaded from the progress bar on the touch
screen display.