Lacanche LVI 962 ECT-D User Manual - Induction Hotplates
USER’S MANUAL
Induction hotplates are fitted with :
- a rotating encoder control that gives 9 power selections
- an electronic display of the power being used.
- 2 warming positions (at approximately 42°C and 70°C in the
recipient).
- 1 fast heating position which gives level-9 power for 2 minutes
and then automatically switches to the preset power level.
- The booster function lasts 10 minutes.
- 1 Child safety function.
- Security of superheating.
N.B : Each hotplate is fitted with a waste heat indicator lamp.
These lamps light up a short time after the corresponding hotplate has been switched on and go
out when the heat in the zone of the hotplate has dropped to a value that no longer constitutes a
risk to users (approximately 60°C) : Is the Message «
Hot».
A ventilator is located underneath the table
.
Use :
Place the pan on the desired cooking zone.
Turn the control button of the hotplate required
The power level is set on the display.
To use function accelerator, of position 0, turn the lever on the left (the letter A is displayed) then
position the lever on the level of desired potency.
N.B : One or more hotplates may be selected.
As heating is very rapid, select the target heat required immediately (i.e. no need to increase heat
in stages).
The various positions are best suited to the following examples of cooking operations :
1 & 2 = Keeping food warm or preparing sauces.
3 & 4 = Gentle simmer or maintain cooking.
5 & 6 = Sustained simmer or cooking pasta or rice once water has
boiled.
7 = Frying.
8 = Browning or seizing meat.
9 = Bring to or maintain rolling boil.
P = Booster = Brings liquid to boil rapidly.
A = Potency level 9 during 8 minutes then commutes automatically
at the level of potency chosen.
U = Assertion in temperature (70°C).
u = Assertion in temperature (42°C).
Observation :
The function booster rocket can be applied to the hotplate at the
same time of the hotplate or .
The function booster rocket cannot be applied to both hotplates or at the same time.
The first home chosen in function booster rocket will cross (blinking billing) to potency 8/9
automatically in case of selection of function booster rocket on the second home.
The booster function lasts 10 minutes.
The child safety function blocks the induction hotplate in the OFF position to avoid its being
switched on accidentally, for example by a child.
Activating the child safety function :
Delay the three levers in zero, turn one of three levers in sense anti-per hour and support in this
position up to the activation of function security children represent by billing (L).
To deactivate the child safety function, turn one of the three dials counter-clockwise and hold it in
this position until the child safety function is deactivated.
INDUCTION HOTPLATES
Beaune-Bussy induction - Ft 174a - GB - Rév 01 - Modifié le : 26/03/2014 22/32