LaCie 107756 - Dupli Disc DVD121 User Manual

Manual is about: USB 2.0

Summary of 107756 - Dupli Disc DVD121

  • Page 1

    Lacie dupli disc dvd121 usb 2.0 user manual page table of contents table of contents health and safety precautions 4 general use precautions 5 media precautions 5 1. Introduction to the lacie dupli disc dvd121 6 1.1. A few words about copyright laws 7 1.1.1. Data safety 7 1.1.2. Manual updates 7 2. ...

  • Page 2

    Lacie dupli disc dvd121 usb 2.0 user manual page table of contents 4.11.6. “11.6. Startup menu” 27 4.11.7. “11.7. Auto verify” 28 4.11.8. “11.8. Auto compare” 28 4.11.9. “11.9. Auto prescan” 28 4.11.10. “11.10. Eject disc” 29 4.11.11. “11.11. Burn on the fly” 29 4.11.12. “11.12. Burn mode” 29 4.11.1...

  • Page 3

    Lacie dupli disc dvd121 usb 2.0 user manual page forward copyrights copyright © 2006 lacie. All rights reserved. No part of this publi- cation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, me- chanical, photocopying, recording or otherwise, ...

  • Page 4

    Lacie dupli disc dvd121 usb 2.0 user manual page forward this symbol on the prod- uct or on its packaging indicates that this prod- uct must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designed coll...

  • Page 5: General Use Precautions

    Lacie dupli disc dvd121 usb 2.0 user manual page do not expose the duplicator to temperatures outside the range of 5° c to 35° c (41° f to 95° f); or to op- erational humidity beyond 5-80%, non-condensing, or non-operating humidity beyond 10-90%, non- condensing. Doing so may damage the duplicator o...

  • Page 6

    Lacie dupli disc dvd121 usb 2.0 user manual page your lacie dupli disc dvd121 is a smart and easy-to-use device dedicated to dvd and cd duplica- tion, bringing you the following features: two ide dvd±rw drives that can record almost any type of data on dvd+r, dvd+rw, dvd-r, dvd-rw, dvd-r9/+r9 double...

  • Page 7

    Lacie dupli disc dvd121 usb 2.0 user manual page your new lacie duplicator opens up a whole world of possibilities for copying data and audio onto disc. Please be responsible in your use of this wonderful tech- nology. Before copying anything onto a cd-r, cd- rw, dvd±r or dvd±rw disc, make sure you ...

  • Page 8: 2.1. Supported Dvd Formats

    Lacie dupli disc dvd121 usb 2.0 user manual page your lacie dupli disc dvd121 2. Your lacie dupli disc dvd121 2.1. Supported dvd formats your lacie dvd dupli-121 can duplicate the fol- lowing dvd formats: dvd-rom with iso header iso 9660 personal dvd-video discs dvd±r hybrid cd (iso & hfs) dvd-rom p...

  • Page 9: 2.3. Views of The Drive

    Lacie dupli disc dvd121 usb 2.0 user manual page your lacie dupli disc dvd121 2.3. Views of the drive control panel source/master drive (default setting: see “menu 8” to modify) target/slave drive (default setting: see “menu x 8” to modify) activity/power led on/off button 2.3.1. Front view ■ ent es...

  • Page 10

    Lacie dupli disc dvd121 usb 2.0 user manual page 0 display panel - shows which function is being performed and displays messages. Up arrow - push this button to scroll up through the functions and menus. Ent button - push this button to start a selected function. Esc button - push this button to can...

  • Page 11

    Lacie dupli disc dvd121 usb 2.0 user manual page media tray - this is where you insert the master and blank media. Load/eject button - opens and closes the media trays. Activity led - lights up when the drive is ac- cessing media. Emergency eject hole - insert a straightened paper clip (or similar o...

  • Page 12

    Lacie dupli disc dvd121 usb 2.0 user manual page your lacie dupli disc dvd121 power supply connector - this is where you plug in the power supply cable supplied with your lacie dvd dupli-121. Fan - helps keep your lacie dvd dupli-121 cool during operation. Do not block and ensure there is sufficient...

  • Page 13: 3.2. Connecting Via Usb

    Lacie dupli disc dvd121 usb 2.0 user manual page setting up your lacie dupli disc dvd121 3. Setting up your lacie dupli disc dvd121 3.1. Powering on your lacie dupli disc dvd121 setting up your lacie dupli disc dvd121 is a snap – just follow these basic steps: set-up your lacie dupli disc dvd121 on ...

  • Page 14

    Lacie dupli disc dvd121 usb 2.0 user manual page setting up your lacie dupli disc dvd121 3.3. Turning off the lacie dupli disc dvd121 to turn off the lacie dupli disc dvd121, wait until all duplications have finished, and then push the on/off switch on the front of the device. Caution: do not turn o...

  • Page 15

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 4. Using your lacie dupli disc dvd121 there are 12 major functions in the copy controller, and there are subfunctions in functions 11 and 13 as the following figures show. Copy controller 1. Copy 2. Test 3. Test & co...

  • Page 16

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 11. Setup 11.7 auto verify 11.6 startup menu 11.5 auto start drive 11.4 read speed 11.3 dvd burn speed 11.2 cd burn speed 11.1 language 11.8 auto compare 11.9 auto prescan 11.10 eject disc 11.11 burn on the fly 11.12...

  • Page 17: 4.1. “

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 the copy mode allows you to copy data directly from a source dvd onto a blank dvd disc. Before copying, make sure that the source disc is placed into the source drive. After the initialization process has finished, p...

  • Page 18: 4.2.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 4.2. “2. Test” the test function is designed to simulate the copy- ing process, and does not write data to the blank disc. Technical note: due to a technical limi- tation of the dvd+ format, the test function does no...

  • Page 19: 4.3.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 4.3. “3. Test & copy” the test & copy function first tests the source and blank discs. If the test is ok, the copy process will then start automatically. Technical note: due to a technical limita- tion of the dvd+ fo...

  • Page 20: 4.4.

    Lacie dupli disc dvd121 usb 2.0 user manual page 0 using your lacie dupli disc dvd121 the verify process is used to ensure that the disc can be read correctly. Once the initialization is completed and the 1. Copy menu is displayed, press the down arrow on the con- trol panel three times to scroll to...

  • Page 21: 4.6.

    Lacie dupli disc dvd121 usb 2.0 user manual page src: 02 dvd-rw identical using your lacie dupli disc dvd121 if the comparison fails (as below), the screen will in- dicate the failure. Press the ent button twice and the screen will show the following information: src: 02 dvd-rw toc not match the pre...

  • Page 22: 4.8.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 the select source function is used to choose the drive for the source data. The default source drive is the top drive. Note that even if you change the source drive, only the top one can be used when connected in usb...

  • Page 23

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 once you have selected the track, use the down ar- row button to move to the end menu, as shown in the following screen: select track: end 1track03:25 press the ent button to finish the cd editing, and use the to con...

  • Page 24

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function is not available. 4.10.2. “10.2 cd to hdd” ■ this function is not available. 4.10.3. “10.3 play audio track” ■ allows you to finish up the disc (close the session) when you have burnt a cd using the tra...

  • Page 25: 4.11.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 the setup menu allows you to change the lacie dupli disc dvd121 default settings. Once you have changed a setting, press the ent button to save the changes. Once the initialization is completed and the 1. Copy menu i...

  • Page 26

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function allows you to change the speed at which the lacie dupli disc dvd121 records cds. From the above menu, press the esc button and use the up and down arrow s to scroll to the following screen: 11-02.Setup ...

  • Page 27

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function allows the lacie dupli disc dvd121 to automatically copy or test blank dvd discs when they are placed in the dvd±rw drive. From the above menu, press the esc button and use the down arrow to scroll to t...

  • Page 28

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function enables the lacie dvd dupli-121 to automatically compare the source disc to the target disc after copying. From the above menu, press the esc button and use the down arrow to scroll to the follow- ing s...

  • Page 29

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this option is not available on this model. This function allows you to set the type of recording method for cds. There are three modes: dao (disc at once), tao not close (track at once, unclosed cd) and tao (track a...

  • Page 30

    Lacie dupli disc dvd121 usb 2.0 user manual page 0 using your lacie dupli disc dvd121 this function displays the basic information about the dvd drives, such as the model and individual drive’s firmware. From the above menu, press the esc button and use the down arrow to scroll to the follow- ing sc...

  • Page 31: 4.12.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function is used to erase both the toc (table of contents) and data from cd-rw and dvd±rw discs. Data cannot be retrieved after performing this function, and this process also takes more time than a quick erase....

  • Page 32: 4.13.

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 the advanced setup menu allows you to change the system configuration. To access the advanced setup menu, return to the setup menu and press the esc button for 2 seconds. There are 14 submenu options under the 13. Ad...

  • Page 33

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this function allows you to overburn data beyond the normal limitation of your blank media. The default setting is off . Caution: lacie warns you that enabling this function may irreversibly damage your duplicator. L...

  • Page 34

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 updating the duplicator’s firmware will allow you to replace the duplicator’s drives. However, this will void your warranty. New machine firmware can be obtained on a cd from lacie after-sales services. Prior to cont...

  • Page 35

    Lacie dupli disc dvd121 usb 2.0 user manual page using your lacie dupli disc dvd121 this is a special copy mode. The default setting is off . When duplicating an audio cd, this mode allows you to copy of the song/album titles and author’s name, provided this information is available on the source cd...

  • Page 36: 5. Troubleshooting

    Lacie dupli disc dvd121 usb 2.0 user manual page troubleshooting 5. Troubleshooting 5.1. About the display screen if, after powering on the lacie dupli disc dvd121, the display screen does not light and no images appear, check to ensure that the power cord is firmly seated in both the drive and the ...

  • Page 37

    Lacie dupli disc dvd121 usb 2.0 user manual page 5.6. Emergency ejection of discs in the event that a disc cannot be ejected from either of the drives using the tray open buttons (when no duplication operation is being performed), an emergency eject operation will open the media tray. Switch off the...

  • Page 38: 5.7. Display Screen Messages

    Lacie dupli disc dvd121 usb 2.0 user manual page troubleshooting 5.7. Display screen messages initialize sdram initialize the memory of the system. Detect drives detect what drives are connected with the system. User abort! Cancel the job during operation. Analyzing analyze the source disc. Source d...

  • Page 39

    Lacie dupli disc dvd121 usb 2.0 user manual page contacting customer support 6. Contacting customer support read the manuals and review the troubleshooting section. If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can’t get your lacie device t...

  • Page 40: 7. Warranty

    Lacie dupli disc dvd121 usb 2.0 user manual page 0 contacting customer support lacie warrants your device against any defect in material and workmanship, under normal use, for the period designated on your warranty certificate. In the event this product is found to be defective within the warranty p...