Managed media converter chassis system 1 user manual preface the managed media converter chassis system supports the media converter chassis to monitor the each media converter ( co ) or chassis manager status and to configure advanced function of the managed converter chassis. Through out-band mana...
Managed media converter chassis system 2 user manual table of contents preface 1 table of contents 2 chapter overview 3 technical specifications 3 system configuration 3 application and connector pinouts 3 technical specification 4 chassis manager 4 media converter ( mc ) as co side 6 media converte...
Managed media converter chassis system 3 user manual chapter overview technical specifications this chapter contains the following models: 1. Chassis manager 2. Media converter ( mc ) as co side 3. Media converter ( terminal ) as cpe side 4. 8 slot managed converter chassis system configuration this...
Managed media converter chassis system 4 user manual technical specification chassis manager key features z one-channel media conversion between 10/100base-tx and 100base-fx. Z support auto-negotiation and auto-mdix for 10/100base-tx port. Z fiber media allows: multi-mode fiber using sc, st, vf-45, ...
Managed media converter chassis system 5 user manual z cpe mc auto report z cpe mc status – status of power, status of receiving optical power, terminal link status, mc status, informing way for optical receiving power off, status of loopback test, notification of link status for the terminal, termi...
Managed media converter chassis system 6 user manual 100base-tx 2-pair utp cat. 5, up to 100m (328ft) 100base-fx 50 or 62.5/125um multi-mode fiber optic cable 9 or 10/125um single-mode fiber optic cable switching method: store-and -forward forwarding rate: 14,880pps for 10mbps; 148,810pps for 100mbp...
Managed media converter chassis system 7 user manual z status leds. Z used with a managed chassis. Z hot-swappable when used with a managed chassis. Technical specification led: per unit – pw/fa (power, failure alarm) per port – 10/100tx: lk/at (link/activity), fd/cl (full-duplex/collision) 100fx: l...
Managed media converter chassis system 8 user manual media converter ( terminal ) as cpe side key features z one-channel media conversion between 10/100base-tx and 100base-fx. Z support auto-negotiation and auto-mdix for 10/100base-tx port. Z fiber media allows: multi-mode fiber using sc, st, vf-45,...
Managed media converter chassis system 9 user manual physical specification power: 0.25a @ 12vdc power supply operating temperature: 0℃ ~ 45 ℃ (32℉ ~ 113℉) storage temperature: -10 ℃ ~ 70 ℃ (14℉ ~ 158℉) humidity: 5 ~ 95%, non-condensing emission & compliance: ce mark class a, fcc part 15 class a dim...
Managed media converter chassis system 10 user manual environmental specifications power: ac input: 100-240v dc input: 2.67a @ 12vdc operating temperature: 0℃ ~ 45 ℃ (32℉ ~ 113℉) storage temperature: -10 ℃ ~ 70 ℃ (14℉ ~ 158℉) humidity: 5 ~ 95%, non-condensing emission & compliance: ce mark class a, ...
Managed media converter chassis system 11 user manual system configuration connecting to power the chassis system is equipped with two power connectors. When the chassis is connecting with two powers, you can have the redundant function. Ac power connector dc power connector ac 100v ~ 240v 2.67a @ 1...
Managed media converter chassis system 12 user manual web-based browser interface the managed media converter chassis system is accessible using a web browser ( ie explorer, netscape communication, etc. ) to open up the managed converter chassis monitering system. Logging on to the managed media con...
Managed media converter chassis system 13 user manual 1. System change there are five items in the system change menu : ‘ device name ‘, ‘ new password ‘, ‘ old password ‘, ‘ version ‘ and ‘ mac address ‘. 1.1. Device name : this section is to set your own ‘ device name ‘. 1.2. New password : this s...
Managed media converter chassis system 14 user manual 2. Ip configuration there are 4 items in the ip configuration : ‘ dhcp ‘, ‘ ip address ‘, ‘ netmask ‘ and ‘ default gateway ‘. 2.1. Dhcp : to set the dhcp ‘ enable ‘ or ‘ disable ‘. 2.2. Ip address : to allocate an ip address for the managed conv...
Managed media converter chassis system 15 user manual chassis => chassis # 0~3 => chassis h/w monitor this section you can see the chassis # 0~3 hardware monitor : temperature. Supply voltage value ( 12 volts ) : suggest the normal condition 12 volts ( +/- 10% ). Fan status : there are 2 fans in cha...
Managed media converter chassis system 16 user manual operation status : ‘ normal ‘ or ‘ local loop test ‘ or ‘ far end fault ‘ or ‘ hardware fault ‘ or ‘ software fault ‘. Media port 1 ( type : current model ) : ‘ link status ‘, ‘ receive count ‘, ‘ drop count ‘, and ‘ collision count ‘. Media port...
Managed media converter chassis system 17 user manual mc options : forwarding mode : ‘ store-forward ‘ or ‘ cut–through ‘ or ‘ repeater ‘ or ‘ auto-change ‘. Remote control : ‘ disable ‘ or ‘ enable ‘. Link fault pass through : ‘ disable ‘ or ‘ enable ‘. Media port1 ( type : current model ) : port m...
Managed media converter chassis system 18 user manual 3.4. Cpe mc autoreport chassis => chassis # 0~3 => mc # 1~8 => cpe mc autoreport status of loopback test : ‘ not test ‘ or ‘ test ‘. Option b : ‘ support ‘ or ‘ not support ‘. : if the option b is support by terminal side, which can inform speed,...
Managed media converter chassis system 19 user manual informing way for optical receiving power off : ‘ far-end-fault pattern ‘ or ‘ maintenance frame ‘. Mc support multi-port utp : ‘ 1 ‘ or ‘ more than 1 ‘. Link fault pass through : ‘ disable ‘ or ‘ enable ‘. 3.5. Cpe mc status chassis => chassis #...
Managed media converter chassis system 20 user manual capability of auto-negotiation for the terminal : ‘ enable ‘ or ‘ disable ‘. Number of interface in terminal : ‘ 1 ‘ or ‘ more than 1 ‘. : if you wish to get the most recent remote status, please press the ‘ apply ‘ button for the status. 3.6. Cp...
Managed media converter chassis system 21 user manual media port2 ( type : current model ) : port mode : ‘ 100hd ‘ or ‘ 100fd ‘. Flow control : ‘ disable ‘ or ‘ enable ‘. Informing way for receiving off : ‘ far-end-fault patten ‘ or ‘ maintenance frame ‘. : after configuration set, need to press the...
Managed media converter chassis system 22 user manual temperature : + 45 c supply voltage ( 2.5 volts ) supply voltage ( 3.3 volts ) supply voltage ( 12 volts ) : under the normal condition, suggest the tolerance for all supply voltage should not exceed +/- 10%. 4. Monitor 4.1. Total co mc status mo...
Managed media converter chassis system 23 user manual this section you can see the mc status for all media converter installed in the chassis . 4.2. Total cpe mc autoreport monitor => chassis # 0~3 => total cpe mc autoreport this section you can see the terminal mc auto report for all media converte...
Managed media converter chassis system 24 user manual 4.3. Total cpe mc status monitor => chassis # 0~3 => total cpe mc status this section you can see the terminal mc status for all media converter installed in the chassis . 4.4. Total loopback test monitor => chassis # 0~3=> total loopback test.
Managed media converter chassis system 25 user manual this section you can see the loopback test status for all media converter installed in the chassis . 4.5. Total mc hardware status monitor => chassis # 0~3=> total mc hardware status this section you can see the mc hardware status for all media c...
Managed media converter chassis system 26 user manual 4.6. Chassis monitor this section you can monitor all the 0~3 managed converter chassis status. 5. Snmp configuration.
Managed media converter chassis system 27 user manual system contact : contact information for the system administrator responsible for managing system. System location : description of where your system is physically located. Get community : public / private set community : public / private 6. Alar...
Managed media converter chassis system 28 user manual low power limit (%) : 0 ~ 100 % high temperature limit (c) : suggest set on 45 ℃ fan operation time limit (hours) : 1000 hours or more 6.3. Alarm mail – trap.
Managed media converter chassis system 29 user manual if you check the « enable » alarm by smtp, system will send alarm information to the configured email address through the configured mail server. 6.4. Alarm snmp – trap snmp enables network administrators to manage network performance, find and s...
Managed media converter chassis system 30 user manual if press ok for the ‘ are you sure ? ‘ column, all changed configuration for chassis manager will be saved. And cancel will be no save. 7.2. Configuration of all mc if press the save for configuration of all mc, all previous changes of configurat...
Managed media converter chassis system 31 user manual 8. Default 8.1. Configuration of chassis manager if press ok for the ‘ are you sure ? ‘ column, all configuration for chassis manager will be reset to factory default. And all configuration for chassis manager will not be reset to factory default...
Managed media converter chassis system 32 user manual if press the default for configuration of all mc, all configuration will be reset to factory default until it shows ‘ done ‘. : note the n/a indicate ‘ not applicable ‘. 9. Update firmware you can update the firmware of your system. Normally, thi...
Managed media converter chassis system 33 user manual appendix a - connector pinouts the following table lists the pinout of the ethernet switch ’ s 10/100base-tx ports. For 10/100base pin 1 / 3 trans / receive data + for 10/100base pin 2 / 6 trans / receive data - 100base-fx: 100mbp ethernet implem...
