Lacrosse 617-1392B Instruction Manual - Month/date Format.
617-1392B/617-1392W www.lacrossetechnology.com/support
Page | 3
1.
Press the
▲
button to select 12-hour time and the
Month/Date format.
2.
Press the
▲
button again to select 24-hour time and the
Date/Month format.
Note: From the time display, press the TIME SET button to
select Month/Date or Year to display in the lower left-hand
corner.
Set Alarm 1 or Alarm 2
The clock has two separate time alarms. Setting the alarms and
activating the alarms are separate actions.
1.
Hold the AL-SET buttonfor 2 seconds to enter alarm time
set mode for Alarm 1.
2.
Press the
▲
or
▼
buttonsto adjust the alarm time. The
minutes and hours are set together.
3.
Hold the
▲
or
▼
buttonsto change quickly.
4.
Press the AL-SET buttonto confirm and move to Alarm 2.
5.
Press the
▲
or
▼
buttonsto adjust the alarm time. The
minutes and hours are set together.
6.
Hold the
▲
or
▼
buttonsto change quickly.
7.
Press the AL-SET buttonto confirm and exit.
Activate/Deactivate Alarm 1 and Alarm 2
•
To activate or deactivate Alarm 1 or Alarm 2, use the slide
bars on the back of the clock.
•
There is a slide bar (ON/OFF) for AL 1 and for AL 2.
•
When active, Alarm 1 will show in the Date display with
alarm icon.
•
When active, Alarm 2 will show in the Temperature display
with alarm icon.
Snooze
•
When alarm sounds, press the SNOOZE/LIGHT
button to silence the alarm for 5 minutes.
•
The alarm iconwill flash.
Alarm
Icon