Lacrosse PCR156 Instruction Manual - page 9
display.
Setting the Dual Time
* The dual time can be set by pressing MODE for 3
seconds in Dual Time Display. The hour will flash for
input.
* Press MODE: the hour of dual time display digits are
blinking and can be set by pressing
▲
or
▼
key.
*Press MODE again: the minute of dual time display
digits are blinking and can be set by pressing
▲
or
▼
key.
*Press MODE again to confirm the setting.
Light ON/OFF
*Press top button [SNOOZE/LIGHT] key- light will come on and turn off
automatically after 5 seconds
Projection Light and its adjustment
* Press button [SNOOZE/LIGHT] -Projection light will come on and turn off
automatically after 5 seconds.
* When insert adapter and turn on the “Continue - Projection” button, projection light
will turn on continuously until the button is switched off or the AC adapter is pulled
off.
* Press [FLIP] key to rotate the projection image in 180˚orientation clock wise.
Temperature function
Press [ WAVE/˚C/˚F ] to select the temperature display
between Celsius or Fahrenheit.