Lafayette parasol Installation Instructions Manual

Manual is about: cellular shades

Summary of parasol

  • Page 1

    *click back on any page to return to the table of contents* • accu-rise™ • angles and specialty shapes • arches, circles and quarter circles • assure™ • auto-lift® • continuum™ • cord lock • glissade™ • sidelights • skyframe™ • skylite™ manual • skylite w/ auto-lift • slidearch™ cellular shades inst...

  • Page 2: Installation Instructions

    Parasol installation instructions 2 back accu-rise ™ operating system installation instructions parasol cellular shades.

  • Page 3

    Parasol installation instructions 3 back middle rail bottom rail installation brackets handle headrail not shown: bottom-up/top-down shade standard bottom-up shade day/night shade product view.

  • Page 4

    Parasol installation instructions 4 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners nee...

  • Page 5

    Parasol installation instructions 5 back installation overview ■ your order will include the correct number of installation brackets for your shade width, as shown in the table. ➤ there are two sizes of installation brackets, one for 3 / 8 " and 3 / 4 " pleat sizes and a larger one for the 1 1 / 4 "...

  • Page 6

    Parasol installation instructions 6 back mount the installation brackets — inside mount ■ measure 2" from each jamb for bracket location. ➤ if more than two installation brackets came with your order, space additional bracket(s) evenly between the two end brackets and mark their location. Mount into...

  • Page 7

    Parasol installation instructions 7 back mount the installation brackets — outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail on the mounting surface. ➤ alternatively, measure the width of the headrail and use that...

  • Page 8

    Parasol installation instructions 8 back ■ attach the installation or extension brackets using the screws provided. Important: the front edges of the installation brackets must be level and aligned to each other. ■ if using spacer blocks, first attach the installation bracket to the 1 / 2 " spacer b...

  • Page 9

    Parasol installation instructions 9 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. ■ position the end mount brackets so that the top of the attached installation brackets equal th...

  • Page 10: Good

    Parasol installation instructions 10 back install the shade ■ fit the front channel on top of the headrail onto the front lip of the installation brackets. ■ push the headrail up and back until it snaps into place. ■ check to ensure the headrail is securely in the brackets. ➤ check that the bottom o...

  • Page 11

    Parasol installation instructions 11 back install the handle(s) using the handle provides touch of finger ease and convenient shade operation. Important: for shades over 60" wide, two handles will be provided. Space these handles evenly across the rail. ■ attach the handle at the center of the botto...

  • Page 12

    Parasol installation instructions 12 back operate the shade for better support and smoother operation, use the handle when raising and lowering the shade. To raise the shade ■ slowly and steadily push up on the bottom rail handle. Allow the shade to stack evenly. To lower the shade ■ slowly and stea...

  • Page 13

    Parasol installation instructions 13 back troubleshooting problem the shade is hard to raise or lower, or will not raise or lower. Solution make sure that the shade fabric is not caught between the installation bracket and the headrail. Check that the headrail and installation brackets are level and...

  • Page 14

    Parasol installation instructions 14 back removing the shade (if necessary) ■ lower the shade approximately 4". ■ while holding the headrail, push back on the bottom tab of the installation bracket to release the bottom edge of the headrail. ■ after releasing the bottom edge, roll the back of the he...

  • Page 15: Installation Instructions

    Parasol installation instructions 15 back angles and specialty shapes installation instructions parasol cellular shades.

  • Page 16

    Parasol installation instructions 16 back product view headrail bottom rail not shown: angle bottom angle top hexagon octagon trapezoid trapezoid top-down shades installation brackets continuous cord loop angle sharing the headrail with continuous cord loop, cordess, and battery- powered shades stan...

  • Page 17

    Parasol installation instructions 17 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners ne...

  • Page 18

    Parasol installation instructions 18 back installation overview ■ your order will include installation brackets specific to your pleat size. ■ the number of installation brackets required varies with headrail width, as shown. Important: for illustration purposes, the installation brackets for 3 / 4 ...

  • Page 19

    Parasol installation instructions 19 back mount the installation brackets — operable shade inside mount ■ mark 3" in from each jamb. ■ if more than two installation brackets came with your order, space additional bracket(s)evenly between the two end brackets and mark their location. Mount into wood ...

  • Page 20

    Parasol installation instructions 20 back ■ center the installation brackets on your marks, then mark each of the screw holes. ■ mounting depth will vary depending on the fabric pleat size. Refer to the chart for depth requirements. ■ for fully recessed mounting, the fabric will be flush with the fr...

  • Page 21

    Parasol installation instructions 21 back mount the installation brackets — operable shade outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail. ■ alternatively, measure the width of the headrail and use that width t...

  • Page 22

    Parasol installation instructions 22 back ■ if you need more than 1 1 / 2 " of clearance, use extension brackets. Attach the extension brackets using two screws per bracket. ■ attach the installation brackets using the screws and speed nuts provided. Install the operable shade standard installation ...

  • Page 23

    Parasol installation instructions 23 back mount the installation brackets — non-operable angle sharing the headrail with continuous cord loop, cordless, or battery-powered shades for inside mounting installations: for end mount bracket location and headrail installation, refer to the “end mount” sec...

  • Page 24

    Parasol installation instructions 24 back the headrail of the rectangular shade has a magnetic strip attached to the top of the rail. The fabric stack has a metal filler strip inserted into the bottom cell of the angle fabric stack. ■ position the filler strip on the bottom cell of the angle fabric ...

  • Page 25

    Parasol installation instructions 25 back mount the installation brackets — non-operable shade inside mount ■ your order includes installation brackets specific to your pleat size. ■ the number of installation brackets required varies with rail width, as shown. ■ mark installation bracket locations ...

  • Page 26

    Parasol installation instructions 26 back ■ drill the screw holes using a 3 / 32 " drill bit. ■ center the brackets on your marks and attach them using the screws provided. ■ check that the mounting surface is level and the brackets are aligned. If mounting to a heavily textured surface, shim the br...

  • Page 27

    Parasol installation instructions 27 back ■ center the brackets on your marks and mark the screw holes. ■ a minimum flat vertical surface required to mount the brackets: 5 / 8 " is required to mount a 3 / 8 " bracket, 1" is required to mount a 3 / 4 " bracket, and 1 1 / 4 " is required to mount a 1 ...

  • Page 28

    Parasol installation instructions 28 back install the stand-alone angle standard installation brackets ■ install both the headrail and the bottom rail into the installation brackets. ■ loosen the tab screw on each bracket. ■ first push the headrail into the brackets and then push the bottom rail int...

  • Page 29

    Parasol installation instructions 29 back operate the shade ■ keep the cord close to the fabric when operating the shade. ■ to raise or lower the shade, disengage the cordlock by moving the cord toward the center of the shade. ■ pull on the cord to raise the shade. ■ engage the cordlock by returning...

  • Page 30

    Parasol installation instructions 30 back troubleshooting problem the shade will not fit into the installation brackets. Solution check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush ...

  • Page 31

    Parasol installation instructions 31 back problem the tassel cord is too long. Solution the tassel cord length is usually 2 / 3 the length of the fully closed shade. To shorten the tassel cord: ■ slide the tassel up the cord revealing the knot. ■ make a new knot below the tassel at the desired locat...

  • Page 32

    Parasol installation instructions 32 back removing the shade standard installation brackets ■ fully raise the shade. ■ loosen the tab screw on each installation bracket to release the headrail. Note: for non-operable shades, gently pull fabric away from the window and loosen the tab screw to release...

  • Page 33

    Parasol installation instructions 33 back cleaning procedures cellular shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most fabrics, the following cleaning options are available. Dusting ■ regular light dusting with a feather duster is all the cleaning that is n...

  • Page 34: Warning

    Parasol installation instructions 34 back young children can wrap cords around their necks and strangle. ■ always keep cords out of the reach of children. ■ move cribs, playpens and other furniture away from cords. Children can climb furniture to get to cords. ■ do not tie cords together. Make sure ...

  • Page 35: Installation Instructions

    Parasol installation instructions 35 back arches, circles, and quarter circles installation instructions parasol cellular shades.

  • Page 36

    Parasol installation instructions 36 back product view arch rail end cap fabric support cord filler strip pocket and ferrule circle fabric cord disc cover rail end cap specialty end mount bracket magnet headrail for continuous cord loop, cordless, or battery-powered shades disc arch cover filler str...

  • Page 37

    Parasol installation instructions 37 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners ne...

  • Page 38: Installation Overview

    Parasol installation instructions 38 back installation overview your order will include installation brackets and hardware specific to your pleat size and shade type. Installation components for stand-alone arch, arch sharing a headrail with a cord pull shade, and quarter circle shade 3 / 8 " pleat ...

  • Page 39

    Parasol installation instructions 39 back installation components for end mounting an arch sharing the headrail with continuous cord loop, cordless, or battery-powered shades 1¼" installation bracket 3 ∕ 8 " and ¾" installation bracket 1¼" end mount brackets 3 ∕ 8 " and ¾" end mount brackets 3 / 4 "...

  • Page 40

    Parasol installation instructions 40 back prepare the stand-alone arch the arch fabric and filler strip are attached to the rail. ■remove the left end cap from the rail. Important: on an imperfect arch, one edge of the fabric stack will be straight and even, the other edge will be trimmed and uneven...

  • Page 41

    Parasol installation instructions 41 back mount the installation brackets — inside mount ■ your order will include installation brackets specific to your pleat size. ➤ the number of installation brackets required varies with headrail width, as shown. ■ place the rail on the mounting surface. Mark in...

  • Page 42

    Parasol installation instructions 42 back ➤ mounting depth will vary depending on the fabric pleat size. Refer to the chart for depth requirements. ➤ for fully recessed mounting, the fabric will be flush with the front of the window casement. ➤ typically, fully recessed inside mounting is best for e...

  • Page 43

    Parasol installation instructions 43 back ■ center the brackets on your marks and mark the screw holes. ➤ a minimum flat vertical surface required to mount the brackets: 5 / 8 " is required to mount a 3 / 8 " bracket, 1" is required to mount a 3 / 4 " bracket, and 1 1 / 4 " is required to mount a 1 ...

  • Page 44

    Parasol installation instructions 44 back install the stand-alone arch standard installation brackets ■ install the shade into the installation brackets. ➤ loosen the tab screw on each bracket. ➤ push the rail into the brackets. Make sure fabric is not caught between the tab and the rail. ➤ tighten ...

  • Page 45

    Parasol installation instructions 45 back prepare the arch sharing the headrail with a cord pull shade the arch fabric and filler strip are attached to the top of the cordlock shade’s headrail. ■ remove the left end cap from the rail. On bottom-up/top-down or two-on-one headrail shades, pull the lef...

  • Page 46

    Parasol installation instructions 46 back mount the installation brackets for an arch sharing the headrail with a cord pull shade for inside mounting installations: refer to the “end mount” section in the installation, operation, and care instructions that came with your rectangular shade. For outsi...

  • Page 47

    Parasol installation instructions 47 back mount the installation brackets for an arch sharing the headrail with continuous cord loop, cordless, or battery-powered shades for inside mounting installations: refer to the “end mount” section in the installation, operation, and care instructions that cam...

  • Page 48

    Parasol installation instructions 48 back attach the arch to the continuous cord loop, cordless, or battery- powered headrail the headrail of the shade has a magnetic strip attached to the top of the rail. The fabric stack has two metal filler strips inserted into the top and bottom cell of the arch...

  • Page 49

    Parasol installation instructions 49 back prepare the quarter circle shade the shade has two rails: one horizontal rail and one vertical rail. ■ fit the long side of the specialty end mount bracket into the small fabric channels on the horizontal rail. ■ fan out the fabric. ■ connect the two rails b...

  • Page 50

    Parasol installation instructions 50 back ➤ swivel brackets: for 3 / 4 " pleat size brackets, mark the front hole if a mounting depth of 1" or more is available. Mark the rear hole only if the mounting depth is between 1 / 2 " and 1". Caution: do not attach a screw through the swivel eyelet on the b...

  • Page 51

    Parasol installation instructions 51 back mount the installation brackets — outside mount ■ center the quarter circle shade over the window opening at the desired height. Use a pencil to lightly mark the ends of both rails. ➤ alternatively, measure the width of the rails and use that width to mark t...

  • Page 52

    Parasol installation instructions 52 back install the quarter circle shade standard installation brackets ■ install both the horizontal rail and the vertical rail into the installation brackets. ➤ loosen the tab screw on each bracket. ➤ push the rails into the brackets. Make sure fabric is not caugh...

  • Page 53

    Parasol installation instructions 53 back prepare the circle shade ■ stand the cylinder up with the loose cords at the top. The top becomes the outside curve of the circle. ■ flatten the cylinder into the circle by gently pushing down and out on the top. Attach the circle support clips or hooks insi...

  • Page 54

    Parasol installation instructions 54 back install the circle shade ■ place the shade in the window opening with the cords centered, one at the top, the bottom, the left side, and the right side of the shade. ■ wrap the left end cord around the screw holding the left arch support clip. ■ tighten the ...

  • Page 55

    Parasol installation instructions 55 back attach support clips or hooks arch support clips are used to keep the shade from falling against the window or out of (or away from) the window frame. Arch support clips can be used for inside or outside mounting applications. Arch support hooks provide the ...

  • Page 56

    Parasol installation instructions 56 back ■ attach the arch support hooks with the screws provided. Be sure to mount the hooks at a consistent depth within the window frame. Install the arch into the arch support hooks or clips ■ support the fabric as you install the arch. ■ if a center support cord...

  • Page 57

    Parasol installation instructions 57 back removing the stand-alone arch or quarter circle shade standard brackets ■ loosen the tab screw on each bracket to release the headrail. Swivel brackets ■ pull the tab to rotate the swivel arm to open and release the headrail. Removing the shade with a contin...

  • Page 58

    Parasol installation instructions 58 back cleaning procedures cellular shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most fabrics, the following cleaning options are available. Dusting ■ regular light dusting with a feather duster is all the cleaning that is n...

  • Page 59: Installation Instructions

    Parasol installation instructions 59 back assure ™ operating system installation instructions parasol cellular shades.

  • Page 60

    Parasol installation instructions 60 back installation brackets bottom rail headrail product view.

  • Page 61

    Parasol installation instructions 61 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners ne...

  • Page 62

    Parasol installation instructions 62 back installation overview ■ your order will include installation brackets specific to your pleat size. ➤ the number of installation brackets required varies with headrail width, as shown below. Important: for illustration purposes, the standard installation brac...

  • Page 63

    Parasol installation instructions 63 back mount the installation brackets — inside mount ■ mark 3" from each jamb. ➤ if more than two installation brackets came with your order, space additional bracket(s) evenly between the two end brackets and mark their location. Mount into wood whenever possible...

  • Page 64

    Parasol installation instructions 64 back mount the installation brackets — outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail. ➤ alternatively, measure the width of the headrail and use that width to mark the head...

  • Page 65

    Parasol installation instructions 65 back ■ drill the screw holes using a 3 / 32 " drill bit. Important: use drywall anchors when mounting into drywall. ■ attach the installation brackets using the screws provided. Important: the front edges of the installation brackets must be level and aligned to ...

  • Page 66

    Parasol installation instructions 66 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. Install end mount brackets onto the headrail ■ slightly remove the end caps from the headrail. ...

  • Page 67

    Parasol installation instructions 67 back install the shade standard brackets ■ position the shade so the front fabric faces you. ■ slip the headrail into the installation brackets so the front of the bracket slides under the front groove on the top of the headrail. ■ gently roll the back of the hea...

  • Page 68

    Parasol installation instructions 68 back operate the shade note: operate your shade daily to ensure its best performance. ■ to raise or lower the shade, move the bottom rail to the desired height. Important: be careful not to touch the fabric when handling the bottom rail. ■ for inside mount applic...

  • Page 69: Solution

    Parasol installation instructions 69 back troubleshooting problem the shade will not fit into the installation brackets solution check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush a...

  • Page 70

    Parasol installation instructions 70 back problem the ferrule has come off the cord. How do i rethread the ferrule? Solution thread the end of the cord into the tapered end of the ferrule. Loop the cord around the ferrule and back through the tapered end. Make sure the loop fits into the groove on t...

  • Page 71

    Parasol installation instructions 71 back solution ■ to shorten the cord, hold the cord tight under the ferrule and slide the ferrule up toward the pocket the amount you measured. ■ to lengthen the cord, hold the cord tight between the pocket and the ferrule and slide the ferrule away from the pocke...

  • Page 72

    Parasol installation instructions 72 back cleaning procedures cellular shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most fabrics, the following cleaning options are available. Dusting ■ regular light dusting with a feather duster is all the cleaning that is n...

  • Page 73: Installation Instructions

    Parasol installation instructions 73 back auto-lift ™ operating system installation instructions parasol cellular shades.

  • Page 74

    Parasol installation instructions 74 back radio frequency fcc compliance: this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including...

  • Page 75

    Parasol installation instructions 75 back not shown: bottom-up/top-down shade day/night shade installation brackets spacer blocks bottom rail standard bottom-up shade headrail low mount battery wand bracket (optional) battery pack mounting bracket options (rear view) high mount battery wand bracket ...

  • Page 76

    Parasol installation instructions 76 back thank you for purchasing battery-powered motorized shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools...

  • Page 77

    Parasol installation instructions 77 back installation overview to install your shade, you will need to perform the following three easy steps: step 1: install the brackets step 2: install the shade step 3: connect the power source step 1 — install the brackets ■ your order will include the correct ...

  • Page 78

    Parasol installation instructions 78 back mounting types and window terminology if the installation brackets are mounted correctly, the rest of the installation process follows very easily. To prepare for this important first step, review the mounting types and basic window terminology illustrated b...

  • Page 79

    Parasol installation instructions 79 back ■ center the brackets on your marks, then mark each of the screw holes. ➤ mounting depths vary depending on the fabric pleat size. See the following chart for minimum and fully recessed (from the front of the sill to the back of the installation bracket) dep...

  • Page 80

    Parasol installation instructions 80 back ■ drill the screw holes using a 3 / 32 " drill bit. Caution: use drywall anchors when mounting into drywall. ■ use a level to check that the mounting surface is level. Shim the brackets if necessary. ■ attach the installation brackets using the screws provid...

  • Page 81

    Parasol installation instructions 81 back ■ center the brackets on your marks, then mark each of the screw holes. ➤ a minimum of 1 1 / 4 " flat vertical surface is required to mount the brackets. ➤ the top of the installation brackets or extension brackets should be at the desired shade height. The ...

  • Page 82

    Parasol installation instructions 82 back ■ if using additional spacer blocks, attach the spacer block/installation bracket assembly to a flat vertical mounting surface with a #6 mounting screw long enough for a secure installation. ■ if using more than one spacer block, snap the additional spacer b...

  • Page 83

    Parasol installation instructions 83 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. ■ position the end mount brackets so that the top of the attached installation brackets are at ...

  • Page 84

    Parasol installation instructions 84 back step 2 — install the shade if you have an external satellite eye... Caution: handle the external eye carefully to avoid damaging the infrared eye. Do not touch the infrared eye. ■ plug the 6-pin satellite eye connector into the 6-pin port on the side of the ...

  • Page 85

    Parasol installation instructions 85 back mount the headrail ■ hold the shade so that the front of the headrail faces you. ■ slip the headrail onto the installation brackets, so that the front of the bracket fits under the groove of the headrail. ■ push the headrail up and back until it snaps into p...

  • Page 86

    Parasol installation instructions 86 back step 3 — connect the power source ■ refer to the appropriate page based on your order. ➤ for a battery wand or satellite battery pack, see “if you have a battery wand or satellite battery pack...” below. ➤ for an optional dc power supply, see “if you have a ...

  • Page 87

    Parasol installation instructions 87 back plug the power cable into the battery wand ■ on the back of the headrail, connect the power cable (coming from the shade) into the socket on the battery wand. Proceed to “operate the shade” on page 15 if you have a satellite battery pack... Mount the satelli...

  • Page 88

    Parasol installation instructions 88 back if you have a dc power supply... Connect the power supply ■ plug the power cable from the shade into the extension cable. ■ plug the other end of the extension cable into the dc power supply. ■ plug the dc power supply into a standard outlet. ■ secure the po...

  • Page 89

    Parasol installation instructions 89 back operate the shade test the shade using the manual control button testing the shade with the manual control button will allow you to ensure that the motor and power source are working correctly. Caution: when raising the shade for the first time, observe how ...

  • Page 90

    Parasol installation instructions 90 back resetting the shade basic reset ■ press and hold the manual control button for 6+ seconds. The shade moves slightly up and down once to indicate that it has been reset. Release the button. ■ press and release the manual control button to close the shade comp...

  • Page 91: Problem

    Parasol installation instructions 91 back troubleshooting if your shade is not operating correctly: ■ first review the guide that came with your remote control or wireless wall switch. ■ next refer to the following troubleshooting procedures below for the specific solutions for your shade. Problem t...

  • Page 92

    Parasol installation instructions 92 back problem the shade is operating slowly or does not raise or lower completely. Solution the batteries may be low in the wand or satellite battery pack. Replace the batteries. Check that the battery wand, satellite battery pack, or dc power supply is securely c...

  • Page 93

    Parasol installation instructions 93 back removing the shade (if necessary) ■ lower the shade approximately 4". ■ while holding the headrail, push back on the bottom tab of the installation bracket to release the bottom edge of the headrail. ■ after releasing the bottom edge, roll the back of the he...

  • Page 94: Installation Instructions

    Parasol installation instructions 94 back continuum ™ operating system installation instructions parasol cellular shades.

  • Page 95

    Parasol installation instructions 95 back not shown: day/night shade two-on-one headrail shade installation brackets cord tensioner and bracket bottom rail standard bottom-up shade bottom-up/top-down shade middle rail hold-down brackets (optional) headrail product view.

  • Page 96

    Parasol installation instructions 96 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools needed ■ flat bl...

  • Page 97

    Parasol installation instructions 97 back installation overview ■ your order will include the correct number of installation brackets for your shade width, as shown in the table. ➤ there are two sizes of installation brackets, one for 3 / 8 " and 3 / 4 " pleat sizes and a larger one for 1 1 / 4 "ple...

  • Page 98

    Parasol installation instructions 98 back mount the installation brackets — inside mount ■ measure 2" from each jamb for bracket location. ➤ if more than two installation brackets came with your order, space additional bracket(s) evenly between the two end brackets and mark their location. Mount int...

  • Page 99

    Parasol installation instructions 99 back mount the installation brackets — outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail on the mounting surface. ➤ alternatively, measure the width of the headrail and use tha...

  • Page 100

    Parasol installation instructions 100 back ■ attach the installation or extension brackets using the screws provided. Important: the front edges of the installation brackets must be level and aligned to each other. ■ if using spacer blocks, first attach the installation bracket to the 1 / 2 " spacer...

  • Page 101

    Parasol installation instructions 101 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. ■ position the end mount brackets so that the top of the attached installation brackets equal ...

  • Page 102

    Parasol installation instructions 102 back install the shade ■ hold the shade so that the front of the headrail (colored fabric) faces you. ■ slip the headrail onto the installation brackets, so that the front of the bracket fits under the groove of the headrail. ■ push the headrail up and back unti...

  • Page 103

    Parasol installation instructions 103 back attach the cord tensioner(s) before you proceed, you must first slide the cord tensioner(s) to the bottom of the cord loop. ■ insert a small screwdriver, punch, or awl through the screw hole at the bottom of the cord tensioner. ■ move the screw hole down to...

  • Page 104

    Parasol installation instructions 104 back operate the shade important: bottom-up/top- down, day/night, and two-on-one headrail shades have two operating cords. Standard bottom-up shades have one operating cord. ■ pull down slowly on the rear cord of the cord loop to lower the shade. ■ pull down slo...

  • Page 105

    Parasol installation instructions 105 back troubleshooting problem the shade is hard to raise or lower, or will not raise or lower. Solution check that the cord tensioner is mounted correctly. See the instructions included with your universal cord tensioner installation kit. For bottom-up/top-down a...

  • Page 106

    Parasol installation instructions 106 back problem the shade will not fit into the installation brackets. Solution check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush against the ins...

  • Page 107

    Parasol installation instructions 107 back removing the shade (if necessary) ■ lower the shade approximately 4". ■ while holding the headrail, push back on the bottom tab of the installation bracket to release the bottom edge of the headrail. ■ after releasing the bottom edge, roll the back of the h...

  • Page 108: Necks and Strangle.

    Parasol installation instructions 108 back young children can strangle in cord loops. They can also wrap cords around their necks and strangle. ■ always keep cords out of the reach of children. ■ move cribs, playpens and other furniture away from cords. Children can climb furniture to get to cords. ...

  • Page 109: Installation Instructions

    Parasol installation instructions 109 back standard cord-lock operating system installation instructions parasol cellular shades.

  • Page 110

    Parasol installation instructions 110 back tassel cord cordlock equalizer tassel installation brackets breakaway cord stop not shown: bottom-up/top-down shade day/night shade two-on-one headrail shade standard bottom-up shade top-down shade product view.

  • Page 111

    Parasol installation instructions 111 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners n...

  • Page 112

    Parasol installation instructions 112 back installation overview ■ your order will include installation brackets specific to your pleat size. ➤ the number of installation brackets required varies with headrail width, as shown in the table. Important: for illustration purposes, the installation brack...

  • Page 113

    Parasol installation instructions 113 back mount the installation brackets — inside mount ■ mark 3" from each jamb. ➤ if more than two installation brackets came with your order, space additional bracket(s) evenly between the two end brackets and mark their location. Mount into wood whenever possibl...

  • Page 114

    Parasol installation instructions 114 back mount the installation brackets — outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail. ➤ alternatively, measure the width of the headrail and use that width to mark the hea...

  • Page 115

    Parasol installation instructions 115 back ■ drill the screw holes using a 3 / 32 " drill bit. Important: use drywall anchors when mounting into drywall. ■ attach the installation brackets using the screws provided. Important: the front edges of the installation brackets must be level and aligned to...

  • Page 116

    Parasol installation instructions 116 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. Install end mount brackets onto the headrail ■ on the end without cords, remove the end cap fr...

  • Page 117

    Parasol installation instructions 117 back install the shade standard brackets ■ position the shade so that the cords face you. ■ slip the headrail into the installation brackets so the front of the bracket slides under the front groove on the top of the headrail. ■ gently roll the back of the headr...

  • Page 118

    Parasol installation instructions 118 back operate the shade important: standard bottom-up and top-down shades have one operating cord. Bottom-up/top-down, day/night, and two-on-one headrail shades have two operating cords. ■ keep the cord close to the fabric when operating the shade. ■ to raise or ...

  • Page 119

    Parasol installation instructions 119 back troubleshooting problem the shade will not fit into the installation brackets. Solution check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush...

  • Page 120

    Parasol installation instructions 120 back problem the bottom rail is not level, or the shade height is incorrect. Solution shade height adjustment shade height and adjustments to level the bottom rail can be made by adjusting the cord on the underside of the bottom rail. ■ locate the ferrule seated...

  • Page 121

    Parasol installation instructions 121 back problem the tassel cord is too long. Solution the tassel cord length is usually 2 / 3 the length of the fully closed shade. To shorten the tassel cord: ■ slide the tassel up the cord revealing the knot. ■ make a new knot below the tassel at the desired loca...

  • Page 122

    Parasol installation instructions 122 back removing the shade (if necessary) standard brackets ■ fully raise the shade. ■ while holding the headrail, loosen the tab screw on each bracket to release the headrail. Optional swivel brackets ■ fully raise the shade. ■ while holding the headrail, pull the...

  • Page 123: Warning

    Parasol installation instructions 123 back young children can wrap cords around their necks and strangle. ■ always keep cords out of the reach of children. ■ move cribs, playpens and other furniture away from cords. Children can climb furniture to get to cords. ■ do not tie cords together. Make sure...

  • Page 124: Installation Instructions

    Parasol installation instructions 124 back glissade ™ left stack right stack traveling center stack split stack (center opening) and day/night installation instructions parasol cellular shades.

  • Page 125

    Parasol installation instructions 125 back installation bracket inside mount shim headrail extension bracket (optional) spacer block (optional) stationary rail bracket cord tensioner cord cord tensioner stationary rail bottom bracket inside mount adaptor moving rail handle moving rail bracket assemb...

  • Page 126

    Parasol installation instructions 126 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners n...

  • Page 127

    Parasol installation instructions 127 back installation overview installation of cellular vertical shades varies based on the shades mounting type, the design to be installed, and the valance type selected. Mounting types and window terminology ■ review the mounting designs and basic window terminol...

  • Page 128

    Parasol installation instructions 128 back valance type ■ an aluminum valance comes with your vertical shade. Installation brackets required ■ the number of installation brackets required varies with headrail width, as shown in the table. Shims are provided with brackets for inside mounted shades. 1...

  • Page 129

    Parasol installation instructions 129 back outside mount — mount the installation brackets ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail. ➤ alternatively, measure the width of the headrail and use that width to mark the hea...

  • Page 130

    Parasol installation instructions 130 back ■ attach the installation or extension brackets using the screws provided. Important: the front edges of the brackets must be level and aligned to each other. ■ if using spacer blocks, position each spacer block with the solid side facing the mounting surfa...

  • Page 131

    Parasol installation instructions 131 back inside/ceiling mount — mount the installation brackets ■ snap a shim onto the top of each installation bracket. Important: you must attach shims to the installation brackets to allow for valance attachment. If you are not installing a valance, shims are not...

  • Page 132

    Parasol installation instructions 132 back prepare the rails ■ lay out all the components for installation on a clean, cloth-covered surface. Position the headrail near the top of the vertical rails. Install the stationary rail bottom bracket into the stationary rail(s) side stack (left and right), ...

  • Page 133

    Parasol installation instructions 133 back install the moving rail bracket(s) into the top of the moving rails side stack (left and right), split stack, day/night, and traveling center stack ■ insert the bottom end of the moving rail bracket into the top of the moving rail. ➤ split stack, day/night,...

  • Page 134

    Parasol installation instructions 134 back install the center pull plate into the headrail split stack only ■ measure and mark the center of the headrail on the cord tensioner channel. ■ position the center pull plate on the underside of the headrail as shown. ■ align the plate to the center mark. ■...

  • Page 135

    Parasol installation instructions 135 back install the rails into the headrail side stack (left and right), split stack, day/night, and traveling center stack remove the end plate ■ remove any end plates that are attached to the headrail. See illustration. Install the moving rail bracket(s) and fabr...

  • Page 136

    Parasol installation instructions 136 back install the stationary rail side stack (left and right), split stack, and day/night ■ the stationary rail bracket has two slots at the top. The rear tracks of the headrail fit into these slots. ■ insert the stationary rail bracket onto the back track of the...

  • Page 137

    Parasol installation instructions 137 back install the cord tensioner side stack (left and right), split stack, day/night, and traveling center stack ■ unwind the cord from the remaining unattached, rubber-banded end plate. ■ slide the cord tensioner into the channel at the front of the headrail. Yo...

  • Page 138

    Parasol installation instructions 138 back install the headrail important: larger installations will require two people. Side stack (left and right), split stack, day/night, and traveling center stack note: once the headrail has been installed, it cannot easily be adjusted by sliding it in the insta...

  • Page 139

    Parasol installation instructions 139 back attach the stationary rail bottom bracket side stack (left and right), split stack, and day/night outside mount option one: attach the stationary rail bracket(s) to the floor ■ use a level to ensure that the stationary rail is exactly vertical when viewed f...

  • Page 140

    Parasol installation instructions 140 back inside mount option one: attach the stationary rail bracket to the floor ■ place a screw through the bracket and into the floor. See option two if you ordered your shade with a cut- out or if you prefer to secure the rail to the wall. Option two: attach the...

  • Page 141

    Parasol installation instructions 141 back final shade adjustments remove excess cord ■ pull on the end of the cord at the cord tensioner to release the slip knot. ■ with the cord tensioner approximately 12" from the end plate, pull on the cord to create tension. ■ re-tie a square knot at the cord t...

  • Page 142

    Parasol installation instructions 142 back adjust the vertical alignment ■ check to see if the moving rail is aligned. ■ if not, locate the adjustment lever attached to the moving rail bracket. ➤ to access the lever, carefully push back the top of the fabric on the moving rail side of the shade. To ...

  • Page 143

    Parasol installation instructions 143 back valance attachment ■ attach the valance clips to the headrail. ➤ slide the valance clip under the bottom lip of the headrail. ➤ rotate the valance clip up to snap it into place on the headrail. ➤ keep a minimum of 3" between the end of the headrail and the ...

  • Page 144

    Parasol installation instructions 144 back ■ attach the valance to the valance clips, as shown. ➤ insert the top of the valance into the top of the valance clip. ➤ rotate the valance down to snap it into place onto the headrail. ■ for wider shades with two-piece valances: lay the two pieces on a fla...

  • Page 145

    Parasol installation instructions 145 back troubleshooting problem the shade binds or moves with difficulty toward the end of the headrail. Solution make sure that the fabric is not caught between the installation bracket and the headrail. Check that the headrail and installation brackets are level ...

  • Page 146: Problem

    Parasol installation instructions 146 back problem a fabric carrier needs to be reattached. Solution place the carrier between the fabric cells. Align the hole in the fabric carrier with the hole in the fabric cells. Press down in front of the pin until the plastic snaps under the side of the pin. P...

  • Page 147

    Parasol installation instructions 147 back removing the shade (if necessary) you will need two people to remove the shade. ■ detach the stationary rail bottom bracket from the wall or floor. ■ grasp the top of the valance and rotate the valance downward to release the valance from the valance clips....

  • Page 148

    Parasol installation instructions 148 back 18-67in-07 3/14 vacuuming caution: do not vacuum xxx fabrics. ■ for deeper cleaning, vacuum gently with a brush attachment. Other cleaning methods desrcibed in the branded iocs include: compressed air/hair dryer (cool setting) spot-cleaning bathtub cleaning...

  • Page 149

    Parasol installation instructions 149 back cordless operable sidelights installation instructions parasol cellular shades.

  • Page 150

    Parasol installation instructions 150 back product view installation brackets headrail bottom rail not shown: standard bottom up bottom-up/top-down non-operable installation brackets middle rail note: the installation procedures for non-operable sidelights are the same as those for operable ones..

  • Page 151

    Parasol installation instructions 151 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners n...

  • Page 152

    Parasol installation instructions 152 back installation overview ■ your order will include four installation brackets per shade, either standard installation brackets or optional swivel brackets. ■ optional swivel brackets can be used with inside mounted shades only. ■ installation brackets are requ...

  • Page 153

    Parasol installation instructions 153 back standard bracket swivel bracket see chart for depth see chart for depth 3" 3" 3" space evenly jamb jamb space evenly 3" mount the installation brackets — inside mount ■ mark 1 1 / 2 " from each jamb for the headrail and the bottom rail. ■ center the bracket...

  • Page 154

    Parasol installation instructions 154 back mount the installation brackets — outside mount ■ center the headrail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail and the bottom rail. ■ alternatively, measure the width of the headrail and use that w...

  • Page 155

    Parasol installation instructions 155 back ■ attach the installation brackets or extension brackets at the top and bottom of the window opening using the screws provided. Important: the front edges of the brackets must be level and aligned to each other. ■ if using spacer blocks with installation br...

  • Page 156

    Parasol installation instructions 156 back mount the installation brackets — end mount end mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. Install end mount brackets onto the headrail ■ slightly remove the end caps from the headrail....

  • Page 157

    Parasol installation instructions 157 back install the shade standard installation brackets ■ position the shade so that the handle face you. ■ slip the headrail into the installation brackets so the front of the bracket slides under the front groove on the top of the headrail. ■ gently roll the bac...

  • Page 158

    Parasol installation instructions 158 back operate the shade standard bottom-up or top-down shades: to raise or lower the moving rail ■ slowly and steadily push up or down on the moving rail handle. Allow the fabric to stack evenly. Bottom-up/top-down shades: to raise or lower the moving rails ■ slo...

  • Page 159

    Parasol installation instructions 159 back troubleshooting problem the shade will not snap into the mounting brackets. Solution make sure mounting brackets are level. Loosen the tab screws slightly. Problem the shade does not raise and lower evenly. Solution check the installation brackets. Make sur...

  • Page 160

    Parasol installation instructions 160 back solution shade height adjustment shade height and adjustments to level the bottom rail can be made by adjusting the cord on the underside of the bottom rail. ■ locate the ferrule seated in a pocket in the bottom rail. ■ remove the ferrule from the pocket by...

  • Page 161

    Parasol installation instructions 161 back problem the ferrule has come off the cord. How do i re-thread the ferrule? Solution thread the end of the cord into thetapered end of the ferrule. Loop the cord around the ferrule and back through the tapered end. Make sure the loop fits into the groove on ...

  • Page 162

    Parasol installation instructions 162 back remove the shade standard brackets ■ fully raise the shade. ■ while holding the headrail or bottom rail, loosen the tab screw on each bracket to release the rails. Swivel brackets ■ fully raise the shade. ■ while holding the headrail or bottom rail, pull th...

  • Page 163

    Parasol installation instructions 163 back skyframe ™ application installation instructions parasol cellular shades.

  • Page 164

    Parasol installation instructions 164 back handle support cord (for sloped shades more than 36" wide) tension cord anchor rail headrail side track side track fabric moving rail product view.

  • Page 165

    Parasol installation instructions 165 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Tools and fasteners n...

  • Page 166

    Parasol installation instructions 166 back installation overview ■ your order will include the correct number of installation brackets for your shade width, as shown in the table below. ➤ outside mounts require installation brackets for both the headrail and anchor rail. ➤ inside mounts require inst...

  • Page 167

    Parasol installation instructions 167 back mount the installation brackets — inside mount ■ mark 4 1 / 2 " from each jamb for the headrail. ➤ if more than two brackets are required, center the third bracket. ➤ if your shade has a support cord, position the third bracket 1" to the left of center. ■ c...

  • Page 168

    Parasol installation instructions 168 back mount the installation brackets — outside mount ■ center the headrail and the anchor rail over the window opening at the desired height. Use a pencil to lightly mark each end of the headrail and the anchor rail. ➤ alternatively, measure the width of the hea...

  • Page 169

    Parasol installation instructions 169 back ■ drill the screw holes using a 3 / 32 ” drill bit. Important: use drywall anchors when mounting into drywall. ■ attach the installation brackets using the screws provided. Important: the front edges of the installation brackets must be level and aligned to...

  • Page 170

    Parasol installation instructions 170 back install the shade standard brackets ■ position the shade so that the front (colored) side of the fabric faces you. ■ slip the headrail into the installation brackets so the front of the bracket slides under the front groove on the top of the headrail. ■ gen...

  • Page 171

    Parasol installation instructions 171 back outside mount the narrow flange on the side tracks should be at the front of the shade. Holes are drilled in the groove near the edge of the wide flange. ■ attach the wide flange to the outside of the window casement using the appropriate fasteners. ■ make ...

  • Page 172

    Parasol installation instructions 172 back adjust the shade tension cords the moving rail should slide easily, yet hold in position when it is released. Adjust the tension cords in the anchor rail if the moving rail does not slide properly. ■ move the slip knot to the right to increase the cord tens...

  • Page 173

    Parasol installation instructions 173 back install the fabric strip ■ center the fabric strip on the anchor rail. ■ angle the fabric strip and insert into the back channel of the anchor rail. ■ gently bow the fabric strip and insert the other edge into the front channel of the anchor rail. Attach th...

  • Page 174

    Parasol installation instructions 174 back troubleshooting problem the shade will not fit into the installation brackets. Solution check that the installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary. Be sure the heads of the screws are flush...

  • Page 175

    Parasol installation instructions 175 back removing the shade (if necessary) ■ fully raise the shade. ■ while holding the headrail, loosen the tab screw on each bracket to release the headrail. ■ outside mounts: loosen the tab screw on each bracket to release the anchor rail. ■ inside mounts: loosen...

  • Page 176

    Parasol installation instructions 176 back skylite ™ with manual operation installation instructions parasol cellular shades.

  • Page 177

    Parasol installation instructions 177 back product view top rail bottom rail inside mount installation bracket side rail (left) moving rail bottom corner bracket spacer blocks moving rail end cap top corner bracket tension cable bottom tension plate and screw outside mount installation bracket tensi...

  • Page 178

    Parasol installation instructions 178 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Mounting types cautio...

  • Page 179

    Parasol installation instructions 179 back arrange the shade components for assembly ■ unwrap the shade components. ■ clear a large, clean space on the floor and position the components for assembly. ■ remove the bubble wrap from the shade. ■ orient the top rail with the fabric colored side facing u...

  • Page 180

    Parasol installation instructions 180 back ■ inside mount shades only: the light gap seals should be inserted into the front channel of all four rails. Make sure they are inserted in the correct orientation, as shown. ■ inside mount shades only: if the angle of the installed shade will be 45° or ste...

  • Page 181

    Parasol installation instructions 181 back insert the top tension plates in place ■ position the left side rail close to the top rail. ■ orient and insert the top left tension plate in the slot in the top corner bracket on the left side rail. Tip: tilt the screwhead up to insert the top tension plat...

  • Page 182

    Parasol installation instructions 182 back attach the side rails to the top and bottom rails attach the left side rail to the top rail ■ insert the top left corner bracket into the top rail and the moving rail end cap into the moving rail, while keeping the fabric stacked. Important: make sure both ...

  • Page 183

    Parasol installation instructions 183 back attach the right side rail to the top rail ■ insert the top right corner bracket into the top rail and the moving rail end cap into the moving rail, while keeping the fabric stacked. Important: make sure both prongs of the moving rail end cap are in the bot...

  • Page 184

    Parasol installation instructions 184 back secure the side rails to the top rail ■ hook one end of the bead chain between the third and fourth bead from the end in the slot in the top left corner bracket. ■ pull the bead chain taut and secure the other end of the bead chain in the slot in the top ri...

  • Page 185

    Parasol installation instructions 185 back insert the bottom tension plates in place ■ place the bottom rail tension plate under the tension cable bracket in the bottom rail on the left side. ■ if you moved the tension cable bracket out of the way, move it back against the bottom corner bracket. ■ i...

  • Page 186: Adjust The Tension

    Parasol installation instructions 186 back ■ press the front of the cover into the front groove. ■ to remove the bottom rail cover: place your finger under one edge of the cover and pull it up while spreading the bottom rail with your other hand. Once you get an edge started, continue pulling the co...

  • Page 187: Test The Shade

    Parasol installation instructions 187 back test the shade prior to installing the shade in the window, test its operation. ■ if you have an extension pole: insert the control knob into the end of the extension pole. ■ align the socket with the control knob. ■ insert the control knob into the socket ...

  • Page 188

    Parasol installation instructions 188 back install the shade — inside mount your order will include four installation brackets per shade and two mounting screws per installation bracket, plus four extra screws. Trim the light gap seals ■ trim the excess light gap seal at all four corners with sharp ...

  • Page 189

    Parasol installation instructions 189 back mount the shade ■ slip the upper portion of the shade into the window frame. Make sure the installation brackets fit into the notches on the plastic hooks (inset). ■ slip a screwdriver behind the shade and push back the brackets to install the lower end of ...

  • Page 190

    Parasol installation instructions 190 back install the shade — outside mount your order will include four installation brackets (two for each side rail) as well as one 3 / 8 " screw and two 1 1 / 2 " screws per installation bracket. Important: you may need another person to assist you with this inst...

  • Page 191

    Parasol installation instructions 191 back mount the shade ■ place the shade over the window opening at the desired location. ■ mark the screw holes and drill them using a 3 / 32 " drill bit. Important: use drywall anchors when mounting into drywall. ■ attach the installation brackets to the mountin...

  • Page 192

    Parasol installation instructions 192 back operate the shade ■ if you have a crank handle: see the operating instructions ■ if you have an extension pole: set the extension pole to the correct length, if necessary. ■ locate the pole lock and press the lock in firmly. ■ slide the pole extension until...

  • Page 193

    Parasol installation instructions 193 back to lower the shade ■ rotate the crank handle or the extension pole counterclockwise to lower the shade. To raise the shade ■ rotate the crank handle or the extension pole clockwise to raise the shade..

  • Page 194

    Parasol installation instructions 194 back troubleshooting the shade operates in the opposite direction. Verify that the side rails are installed in the correct orientation. The shade stops before hitting the bottom rail. Adjust the tension brackets so that the tension cables are parallel to the sid...

  • Page 195: Cleaning Procedures

    Parasol installation instructions 195 back removing the shade (if necessary) inside mount ■ raise the shade to the top. ■ if there are screws attaching the side rails to the window frame, unscrew them. ■ insert a screwdriver at the lower corners of the shade. ■ push back the brackets to release the ...

  • Page 196

    Parasol installation instructions 196 back 18-67in-35 3/14.

  • Page 197: Installation Instructions

    Parasol installation instructions 197 back skylite ™ w/ auto-lift ™ installation instructions parasol cellular shades.

  • Page 198

    Parasol installation instructions 198 back radio frequency fcc compliance: this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includin...

  • Page 199

    Parasol installation instructions 199 back product view top rail bottom rail inside mount installation bracket side rail (left) moving rail sensor eye and manual control button bottom corner bracket satellite battery pack battery wand (for shades narrower than 28 1 / 2 ") battery wand cover battery ...

  • Page 200: Mounting Types

    Parasol installation instructions 200 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet before beginning the installation. Mounting types cautio...

  • Page 201: Shade Configurations

    Parasol installation instructions 201 back shade configurations your shade will operate as one of the following types of shade configurations. Please familiarize yourself with your specific shade configuration: sensor eye/ battery powered satellite eye/ battery powered sensor eye/ dc power supply sa...

  • Page 202

    Parasol installation instructions 202 back arrange the shade components for assembly ■ unwrap the shade components. ■ clear a large, clean space on the floor and position the components for assembly. ■ remove the bubble wrap from the shade. ■ orient the top rail with the fabric colored side facing u...

  • Page 203

    Parasol installation instructions 203 back ■ inside mount shades only: the light gap seals should be inserted into the front channel of all four rails. Make sure they are inserted in the correct orientation, as shown. ■ inside mount shades only: if the angle of the installed shade will be 45° or ste...

  • Page 204

    Parasol installation instructions 204 back insert the top tension plates in place ■ position the left side rail close to the top rail. ■ orient and insert the top left tension plate in the slot in the top corner bracket on the left side rail. Tip: tilt the screwhead up to insert the top tension plat...

  • Page 205

    Parasol installation instructions 205 back attach the side rails to the top and bottom rails attach the left side rail to the top rail ■ insert the top left corner bracket into the top rail and the moving rail end cap into the moving rail, while keeping the fabric stacked. Important: make sure both ...

  • Page 206

    Parasol installation instructions 206 back attach the right side rail to the top rail ■ insert the top right corner bracket into the top rail and the moving rail end cap into the moving rail, while keeping the fabric stacked. Important: make sure both prongs of the moving rail end cap are in the bot...

  • Page 207

    Parasol installation instructions 207 back secure the side rails to the top rail ■ hook one end of the bead chain between the third and fourth bead from the end in the slot in the top left corner bracket. ■ pull the bead chain taut and secure the other end of the bead chain in the slot in the top ri...

  • Page 208

    Parasol installation instructions 208 back insert the bottom tension plates in place ■ place the bottom rail tension plate under the tension cable bracket in the bottom rail on the left side. ■ if you moved the tension cable bracket out of the way, move it back against the bottom corner bracket. ■ i...

  • Page 209: Adjust The Tension

    Parasol installation instructions 209 back ■ press the front of the cover into the front groove. ■ to remove the bottom rail cover: place your finger under one edge of the cover and pull it up while spreading the bottom rail with your other hand. Once you get an edge started, continue pulling the co...

  • Page 210

    Parasol installation instructions 210 back connect the power source ■ refer to the appropriate page based on your order. ■ for battery wands or satellite battery pack, see below. ■ for an optional dc power supply, see “if you have a dc power supply...” if you have battery wand(s) or satellite batter...

  • Page 211

    Parasol installation instructions 211 back mount the satellite battery pack ■ remove the bottom rail cover. ■ attach the wall mount bracket to the back side of the bottom rail using the pre-drilled holes. ■ remove the screws attached to the back side of the bottom rail. ■ attach the wall mount brack...

  • Page 212

    Parasol installation instructions 212 back ■ route the power cable from the shade through the bottom left corner bracket and plug into the socket in the battery wand or the extension cable. ■ if using an extension cable, plug the other end of the extension cable into the socket in the battery wand. ...

  • Page 213

    Parasol installation instructions 213 back if you have a dc power supply... Connect the power supply ■ remove the bottom rail cover. ■ route the power cable from the shade through the bottom left corner bracket and plug into the extension cable. ■ reinstall the bottom rail cover. ■ plug the other en...

  • Page 214

    Parasol installation instructions 214 back test the shade prior to installing the shade in the window, test its operation. ■ press the manual control button on the bottom rail or satellite eye to test the shade. ■ press the button to alternately lower, stop, and raise the shade. ■ if the shade does ...

  • Page 215

    Parasol installation instructions 215 back install the shade — inside mount your order will include four installation brackets per shade and two mounting screws per installation bracket, plus four extra screws. Trim the light gap seals ■ trim the excess light gap seal at all four corners with sharp ...

  • Page 216

    Parasol installation instructions 216 back mount the shade ■ slip the upper portion of the shade into the window frame. Make sure the installation brackets fit into the notches on the plastic hooks (inset). ■ slip a screwdriver behind the shade and push back the brackets to install the lower end of ...

  • Page 217

    Parasol installation instructions 217 back install the shade — outside mount your order will include four installation brackets (two for each side rail) as well as one 3 / 8 " screw and two 1 1 / 2 " screws per installation bracket. Important: you may need another person to assist you with this inst...

  • Page 218

    Parasol installation instructions 218 back mount the shade ■ place the shade over the window opening at the desired location. ■ mark the screw holes and drill them using a 3 / 32 " drill bit. Important: use drywall anchors when mounting into drywall. ■ attach the installation brackets to the mountin...

  • Page 219

    Parasol installation instructions 219 back mount the satellite eye (optional) caution: handle the satellite eye carefully to avoid damaging the infrared eye. Do not touch or push the infrared eye. ■ for infrared operation, choose a location where the infrared signal from the remote is not obstructed...

  • Page 220: Operate The Shade

    Parasol installation instructions 220 back operate the shade remote control operation for information regarding operation and programming of the remote control, refer to your remote control guide. Wireless wall switch operation for information regarding operation and programming of the wireless wall...

  • Page 221: Resetting The Shade

    Parasol installation instructions 221 back resetting the shade if you need to reset the limits: basic reset ■ press and hold the manual control button for 6+ seconds. The shade moves slightly up and down to indicate that it has been reset. Release the button. ■ press and release the manual control b...

  • Page 222: Replacing The Batteries

    Parasol installation instructions 222 back replacing the batteries battery wands ■ raise the shade or lift the moving rail slightly. ■ remove the cover from the bottom rail. ■ unplug the battery wands from the power cable. ■ remove the battery wands. ■ open the battery wands and replace the batterie...

  • Page 223

    Parasol installation instructions 223 back troubleshooting if your shade is not operating correctly: ■ first review the guide that came with your remote control or wireless wall switch. ■ next refer to the following troubleshooting procedures below for the specific solutions for your shade. Problem ...

  • Page 224

    Parasol installation instructions 224 back problem adjacent shades do not stack evenly. Solution if one shade is stacking tighter than another, it may have been reset. Lower and raise the shades to loosen the stack. The shade stack on both shades should be within 5 / 16 " of each other. For more exa...

  • Page 225: Inside Mount

    Parasol installation instructions 225 back removing the shade (if necessary) inside mount ■ raise the shade to the top. ■ if there are screws attaching the side rails to the window frame, unscrew them. ■ insert a screwdriver at the lower corners of the shade. ■ push back the brackets to release the ...

  • Page 226

    Parasol installation instructions 226 back 18-67in-36 3/14.

  • Page 227

    Parasol installation instructions 227 back slidearch ™ installation instructions parasol cellular shades.

  • Page 228

    Parasol installation instructions 228 back product view arch handle arch trim bottom rail installation brackets top cord guide.

  • Page 229

    Parasol installation instructions 229 back thank you for purchasing cellular shades. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet and the enclosed packing list before beginning the insta...

  • Page 230: Installation Overview

    Parasol installation instructions 230 back installation overview ■ your order will include two installation brackets specific to the fabric pleat size and type of brackets ordered. ■ if the arch is over 30" wide, your order will also include a center bracket. Mounting types and window terminology if...

  • Page 231

    Parasol installation instructions 231 back mount installation brackets — inside mount ■ place the shade in the window. ■ mark the mounting surface below the two bottom cord guides. ■ find the center point between your mark and the window jamb. This is the center point of the installation bracket. ■ ...

  • Page 232

    Parasol installation instructions 232 back ■ drill the screw holes using a 3 / 32 " drill bit. Caution: use drywall anchors when mounting into drywall. ■ attach the installation brackets using the screws provided. ■ check that the mounting surface is level and the brackets are aligned. If mounting t...

  • Page 233: Install The Shade

    Parasol installation instructions 233 back attach the end mount brackets to the window jamb ■ position the fully lowered arch in the window. ■ the top of the bottom rail should be aligned with the top of the straight section of the window. ■ mark the screw hole locations. Important: check that the f...

  • Page 234: Install The Arch Trim

    Parasol installation instructions 234 back install the arch trim ■ to size the trim, position it along the entire curved surface, inside the window frame. ■ mark where to cut the arch trim. With inside- mounted shades, the ends of the trim should rest on the bottom of the window casement. ■ cut the ...

  • Page 235

    Parasol installation instructions 235 back ■ mark and drill the back hole of the guide. ■ put a screw in the back hole only. ■ check the top cord guide placement by moving the arch handle to the right to raise the shade. Determine if the top center cord guide is in the correct location by watching t...

  • Page 236: Shade Operation

    Parasol installation instructions 236 back shade operation ■ to close the shade, slide the arch handle to the right. ■ to open the shade, slide the arch handle to the left. Close open.

  • Page 237

    Parasol installation instructions 237 back troubleshooting problem the top cord guide does not reach the top of the window opening. Solution decrease tension / lengthen the center cord open the shade by pulling the handle all the way to the left. Locate the cord from the right hole next to the pocke...

  • Page 238

    Parasol installation instructions 238 back problem the shade has a droopy cord or the shade will not stay up. Solution increase tension / shorten the center cord close the shade by moving the handle all the way to the right. Locate the cord from the right hole next to the pocket (see illustration). ...

  • Page 239

    Parasol installation instructions 239 back problem the fabric rubs against the window casement while opening or closing the shade. Solution adjust the shade before trimming the shade, be sure that the bottom rail is level. Shim if necessary. Also check that the top cord guide is directly above the c...

  • Page 240: Optional Swivel Brackets

    Parasol installation instructions 240 back removing the shade (if necessary) ■ lower the shade completely. ■ remove the two screws securing the top cord guide in place. Standard installation brackets ■ while holding the rail, loosen the tab screw on each bracket to release the rail. Note: for a wide...

  • Page 241: Cleaning Procedures

    Parasol installation instructions 241 back cleaning procedures cellular shades are made of anti-static, dust-resistant fabric which repels dirt and dust. For most fabrics, the following cleaning options are available. Dusting ■ regular light dusting with a feather duster is all the cleaning that is ...

  • Page 242: Warning

    Parasol installation instructions 242 back young children can strangle in cord loops. They can also wrap cords around their necks and strangle. ■ always keep cords out of the reach of children. ■ move cribs, playpens and other furniture away from cords. Children can climb furniture to get to cords. ...